Make it easier by adding an helper accepting either group or
directory
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
The idea is to have namespaces in a datastore to allow grouping and
namespacing backups from different (but similar trusted) sources,
e.g., different PVE clusters, geo sites, use-cases or company
service-branches, without separating the underlying
deduplication domain and thus blowing up data and (GC/verify)
resource usage.
To avoid namespace ID clashes with anything existing or future
usecases use a intermediate `ns` level on *each* depth.
The current implementation treats that as internal and thus hides
that fact from the API, iow., the namespace path the users passes
along or gets returned won't include the `ns` level, they do not
matter there at all.
The max-depth of 8 is chosen with the following in mind:
- assume that end-users already are in a deeper level of a hierarchy,
most often they'll start at level one or two, as the higher ones
are used by the seller/admin to namespace different users/groups,
so lower than four would be very limiting for a lot of target use
cases
- all the more, a PBS could be used as huge second level archive in a
big company, so one could imagine a namespace structure like:
/<state>/<intra-state-location>/<datacenter>/<company-branch>/<workload-type>/<service-type>/
e.g.: /us/east-coast/dc12345/financial/report-storage/cassandra/
that's six levels that one can imagine for a reasonable use-case,
leave some room for the ones harder to imagine ;-)
- on the other hand, we do not want to allow unlimited levels as we
have request parameter limits and deep nesting can create other
issues as well (e.g., stack exhaustion), so doubling the minimum
level of 4 (1st point) we got room to breath even for the
more odd (or huge) use cases (2nd point)
- a per-level length of 32 (-1 due to separator) is enough to use
telling names, making lives of users and admin simpler, but not
blowing up parameter total length with the max depth of 8
- 8 * 32 = 256 which is nice buffer size
Much thanks for Wolfgang for all the great work on the type
implementation and assisting greatly with the design.
Co-authored-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
Co-authored-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
and issue a warning. We can do this, because we know an empty chunk
cannot be valid, and we (assumedly) have a valid chunk in memory.
Having empty chunks on disk is currently possible when PBS crashes,
but the rename of the chunk was flushed to disk, when the actual data
was not.
If it's not empty but there is a size mismatch, return an error.
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
used_datastores returned the 'target', but in the full_restore_worker,
we interpreted it as the source and searched for a mapping
(which we then locked)
since we cannot return a HashSet of Arc<T> (missing Hash trait on DataStore),
we have now a map of source -> target
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
thanks to commit 70142e607dda43fc778f39d52dc7bb3bba088cd3 from
proxmox repos's proxmox-http crate
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
and remove already fixed fixmes.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
[ T: squash in cargo fmt fixup for some trailing ws ]
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
pull_store is the entrypoint used by other code, the rest does not need
to be visible at all.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
else this might remove groups which are not part of the pull scope. note
that setting/using remove_vanished already checks the required privs
earlier.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
On reload the old process hands over to the new process but needs to
keep running until all its worker tasks are finished to avoid
breaking a in-progress action like a xterm.js web shell or a backup
creation/restore.
During that wait time the receiving channel was already closed, but
the TCP sockt accept listener was still left active by mistake.
That paired with the `SO_REUSEPORT` being set on the underlying
socket, made the kernel choose either the old or new process for new
incoming connections, both still listened for them after all and
reuse-port + multiple processes is often used as load-balancer
mechanism.
As the old proxy accepted connections but didn't process them anymore
one could observer sporadic connection failures on any API call, well
any new connection to the proxy, depending on which process got the
it assigned.
The fix is to stop accepting new connections one we shutdown, so poll
the shutdown_future too during accept and just exit the accept-loop
on shutdown.
Note: This part of the code, nor other parts that could influence it,
wasn't changed at all in recent times, so it's still unresolved for
why it pops up only now.
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Co-authored-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
[ T: add more (root cause) info and reword a bit ]
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Returning the GC status was dropped by mistake in commit 762f7d15
("datastore status: factor out api type DataStoreStatusListItem")
As this is considered a breaking change which we also felt, due to
the gc-status being used in the web interface for the datastore
overview list (not the dashboard), re add it.
Fixes: 762f7d15
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
[ T: add reference to breaking commit, reword message ]
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
timeout limits the code with the given timeout in seconds, and
'json-error' return json to stdout when the call returns an error like
this:
{
"msg": "error message",
"error": true,
"code": <HTTP_STATUS_CODE>, // if it was an http error
}
with both options set, a client can more easily determine if the call
ran into a timeout (since it will return a 503 error), and can poll
it again
both is done behind new parameters, so that we can stay backwards-compatible
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
we'll want to reuse that in a later patch
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
the duration of mounting zpools not only correspond to the number of disks,
but also to the content (many subvols for example) which we cannot know
beforehand. so avoid mounting them at the start, and mount it only when
the user requests a listing/extraction with the zpool in path
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
DISK_STATE.lock() and '.resolve()' can both block since they access
the disks. Putting them into a 'block_in_place' makes tokio move it
out in its own thread to avoid that the executor isn't able to
progress any other futures in the mean time.
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
this way, the vm can start up faster, and the actual disk init happens
in parallel. this avoids unnecessary timeouts when starting the vm
if the call panics, we still abort the vm with an error
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
since markdown notes might be rather long, this commit adds a tab
similar to pve's datacenter or node notes. requires a bump of the
widget toolkit in order to use the `pmxNotesView`.
Signed-off-by: Stefan Sterz <s.sterz@proxmox.com>
this copies the markdown primer from the pve docs to allow access to
it via the help buttons in the gui
Signed-off-by: Stefan Sterz <s.sterz@proxmox.com>
data blobs can only appear in a BackupDir (snapshot) in the backup
hierachy, so makes more sense that it lives in there.
As it wasn't widely used anyway it's easy to move the single
non-package call site over to the new one directly and drop the
implementation from Datastore completely.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
the manifest is owned by the backup dir (snapshot) so it should also
handle locking, makes no sense to have the implementation somewhere
higher up.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
move the check for directory before doing the OSString -> String
conversion, which should be a bit more efficient.
Also let the match return the entry in the non-skip/return case to
reduce indentation level for the inner "yield element" part, making
it slightly easier to follow.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
instead of an async recursive function. Not only is it less code,
recursive futures are not really nice and it should be faster too.
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
> The hash set will be able to hold at least capacity elements
> without reallocating. If capacity is 0, the hash set will not
> allocate.
-- rustdoc, HashSet::with_capacity
So, the number we pass is the amount of chunk "IDs" we safe, which is
then 64Ki, not 16Ki and thus the size we can reference too is also
256 GiB, not 64 GiB.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Some raid controllers return a 'transport error' when we expected a
'sense error'. it seems the correct way to check the sense data is when
either the result category is 'SENSE' or when the status is 'CHECK_CONDITION',
so do that. (similar to how 'sg_raw' returns the errors)
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Signed-off-by: Dietmar Maurer <dietmar@proxmox.com>
And drop the base_path parameter on a first bunch of
functions (more reordering will follow).
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
Wolfgang Bumiller
Thomas Lamprecht
Fabian Grünbichler
Dominik Csapak
Hannes Laimer
Stefan Sterz
Dietmar Maurer