*/x is valid syntax for us, but not systemd, so to not confuse users
write it like systemd would accept it
also an timespec must at least have hours and minutes
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
avoid hardcoding width in the docs itself, so that other render
outputs can choose another size.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
It's not all perfect (yet) but way cleaner and simpler to use than
the sphinx one.
Custom do the scrolling for the fixed side bar and make some other
slight adjustments.
Main issue for now is that the "Developer Appendix" is always shown
in the navigation tree, but we only include that toctree for
devbuilds...
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
else we get the default of 16k, which is quite low for our use case.
this improves the TLS upload benchmark speed by about 30-40% for me.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
fixes the error, "manifest does not contain
file 'X.pxar'", that occurs when trying to mount
a pxar archive with 'proxmox-backup-client mount':
Signed-off-by: Dylan Whyte <d.whyte@proxmox.com>
if we have a stale backup without an manifest, we do not count
the remaining files in the backup dir anymore, but this means
we now have to check here if there are really any encrypted
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
similar to the other fix, if we do not set the buffer size manually,
we get better performance for high latency connections
restore benchmark from f.gruenbicher:
no delay, without patch: ~50MB/s
no delay, with patch: ~50MB/s
25ms delay, without patch: ~11MB/s
25ms delay, with path: ~50MB/s
my own restore benchmark:
no delay, without patch: ~1.5GiB/s
no delay, with patch: ~1.5GiB/s
25ms delay, without patch: 30MiB/s
25ms delay, with patch: ~950MiB/s
for some more details about those benchmarks see
https://lists.proxmox.com/pipermail/pbs-devel/2020-September/000600.html
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
by leaving the buffer sizes on default, we get much better tcp performance
for high latency links
throughput is still impacted by latency, but much less so when
leaving the sizes at default.
the disadvantage is slightly higher memory usage of the server
(details below)
my local benchmarks (proxmox-backup-client benchmark):
pbs client:
PVE Host
Epyc 7351P (16core/32thread)
64GB Memory
pbs server:
VM on Host
1 Socket, 4 Cores (Host CPU type)
4GB Memory
average of 3 runs, rounded to MB/s
| no delay | 1ms | 5ms | 10ms | 25ms |
without this patch | 230MB/s | 55MB/s | 13MB/s | 7MB/s | 3MB/s |
with this patch | 293MB/s | 293MB/s | 249MB/s | 241MB/s | 104MB/s |
memory usage (resident memory) of proxmox-backup-proxy:
| peak during benchmarks | after benchmarks |
without this patch | 144MB | 100MB |
with this patch | 145MB | 130MB |
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Before, there were mixed usages of "data store" and
"datastore" throughout the docs.
This improves consistency in the docs by using only
"datastore" throughout.
Signed-off-by: Dylan Whyte <d.whyte@proxmox.com>
We need to update the atime of chunk files if they already exist,
otherwise a concurrently running GC could sweep them away.
This is protected with ChunkStore.mutex, so the fstat/unlink does not
race with touching.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
The iterator of get_chunk_iterator is extended with a third parameter
indicating whether the current file is a chunk (false) or a .bad file
(true).
Count their sizes to the total of removed bytes, since it also frees
disk space.
.bad files are only deleted if the corresponding chunk exists, i.e. has
been rewritten. Otherwise we might delete data only marked bad because
of transient errors.
While at it, also clean up and use nix::unistd::unlinkat instead of
unsafe libc calls.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
This ensures that following backups will always upload the chunk,
thereby replacing it with a correct version again.
Format for renaming is <digest>.<counter>.bad where <counter> is used if
a chunk is found to be bad again before a GC cleans it up.
Care has been taken to deliberately only rename a chunk in conditions
where it is guaranteed to be an error in the chunk itself. Otherwise a
broken index file could lead to an unwanted mass-rename of chunks.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
a range from high to low in rust results in an empty range
(see std::ops::Range documentation)
so we need to generate the range from 0..data.len() and then reverse it
also, the task log contains a newline at the end, so we have to remove
that (should it exist)
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Following changes made:
* Remove empty column "method6" from network list output,
so table fits in console code-block
* Walkthrough bond, rather than a bridge as it may be a more
common setup case
Signed-off-by: Dylan Whyte <d.whyte@proxmox.com>
Add a note to section "Proxmox VE integration" explaining
how to avoid passing password as plain text when using the
pvesm command.
Signed-off-by: Dylan Whyte <d.whyte@proxmox.com>
Change the order of the "Image Archives" and "File
Archives" subsections, so that they match the order
which they are introduced in, in the section "Backup
Content" (minor readability improvement).
Signed-off-by: Dylan Whyte <d.whyte@proxmox.com>
Add screenshots of sync jobs panel in web interface
and explain how to carry out related tasks from it.
Signed-off-by: Dylan Whyte <d.whyte@proxmox.com>
Add screenshots for network configuration and explain
how to carry out related tasks using the web interface.
Signed-off-by: Dylan Whyte <d.whyte@proxmox.com>
Add screenshots for user management section in web
interface and explain how to carry out relevant tasks
using it.
Signed-off-by: Dylan Whyte <d.whyte@proxmox.com>
Add screenshots from the datastore section of the
web interface and explain how to carry out tasks using
the web interface.
Signed-off-by: Dylan Whyte <d.whyte@proxmox.com>
This adds screenshots from the web interface for the
sections related to disk management and adds explanation
of how to carry out tasks using the web interface.
Signed-off-by: Dylan Whyte <d.whyte@proxmox.com>
this implements parsing and calculating calendarevents that have a
basic date component (year-mon-day) with the usual syntax options
(*, ranges, lists)
and some special events:
monthly
yearly/annually (like systemd)
quarterly
semiannually,semi-annually (like systemd)
includes some regression tests
the ~ syntax for days (the last x days of the month) is not yet
implemented
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
instead of using 'as' and silently converting wrong,
use the TryInto trait and raise an error if we cannot convert
this should only happen if we have a negative year,
but this is expected (we do not want schedules from before the year 0)
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
add_* are modeled after add_days
subtract one for set_mon to have a consistent interface for all fields
(i.e. getter/setter return/expect the 'real' number, not the ones
in the tm struct)
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Dominik Csapak
Thomas Lamprecht
Dylan Whyte
Dietmar Maurer
Fabian Grünbichler
Hannes Laimer
Stefan Reiter