The data on the restore daemon is either encoded into a pxar archive, to
provide the most accurate data for local restore, or encoded directly
into a zip file (or written out unprocessed for files), depending on the
'pxar' argument to the 'extract' API call.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
Encodes an entire local directory into an AsyncWrite recursively.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
extract_sub_dir_seq, together with seq_files_extractor, allow extracting
files from a pxar Decoder, along with the existing option for an
Accessor. To facilitate code re-use, some helper functions are extracted
in the process.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
Allows listing files and directories on a block device snapshot.
Hierarchy displayed is:
/archive.img.fidx/bucket/component/<path>
e.g.
/drive-scsi0.img.fidx/part/2/etc/passwd
(corresponding to /etc/passwd on the second partition of drive-scsi0)
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
This will be triggered on updating proxmox-file-restore (via configure,
necessary since the daemon binary might change) and
proxmox-backup-restore-image (via 'activate-noawait', necessary since
the base image might change).
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
Includes methods to start, stop and list QEMU file-restore VMs, as well
as CLI commands do the latter two (start is implicit).
The implementation is abstracted behind the concept of a
"BlockRestoreDriver", so other methods can be implemented later (e.g.
mapping directly to loop devices on the host, using other hypervisors
then QEMU, etc...).
Starting VMs is currently unused but will be needed for further changes.
The design for the QEMU driver uses a locked 'map' file
(/run/proxmox-backup/$UID/restore-vm-map.json) containing a JSON
encoding of currently running VMs. VMs are addressed by a 'name', which
is a systemd-unit encoded combination of repository and snapshot string,
thus uniquely identifying it.
Note that currently you need to run proxmox-file-restore as root to use
this method of restoring.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
Includes functionality for scanning and referring to partitions on
attached disks (i.e. snapshot images).
Fairly modular structure, so adding ZFS/LVM/etc... support in the future
should be easy.
The path is encoded as "/disk/bucket/component/path/to/file", e.g.
"/drive-scsi0/part/0/etc/passwd". See the comments for further
explanations on the design.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
Add a watchdog that will automatically shut down the VM after 10
minutes, if no API call is received.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
Implements the base of a small daemon to run within a file-restore VM.
The binary spawns an API server on a virtio-vsock socket, listening for
connections from the host. This happens mostly manually via the standard
Unix socket API, since tokio/hyper do not have support for vsock built
in. Once we have the accept'ed file descriptor, we can create a
UnixStream and use our tower service implementation for that.
The binary is deliberately not installed in the usual $PATH location,
since it shouldn't be executed on the host by a user anyway.
For now, only the API calls 'status' and 'stop' are implemented, to
demonstrate and test proxmox::api functionality.
Authorization is provided via a custom ApiAuth only checking a header
value against a static /ticket file.
Since the REST server implementation uses the log!() macro, we can
redirect its output to stdout by registering env_logger as the logging
target. env_logger is already in our dependency tree via zstd/bindgen.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
This allows switching the base user identification/authentication method
in the rest server. Will initially be used for single file restore VMs,
where authentication is based on a ticket file, not the PBS user
backend (PAM/local).
To avoid putting generic types into the RestServer type for this, we
merge the two calls "extract_auth_data" and "check_auth" into a single
one, which can use whatever type it wants internally.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
For now it only supports 'list' and 'extract' commands for 'pxar.didx'
files. This should be the foundation for a general file-restore
interface that is shared with block-level snapshots.
This is packaged as a seperate .deb file, since for block level restore
it will need to depend on pve-qemu-kvm, which we want to seperate from
proxmox-backup-client.
[original code for proxmox-file-restore.rs]
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
[code cleanups/clippy, use helpers::list_dir_content/ArchiveEntry, no
/block subdir for .fidx files, seperate binary and package]
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
by using format_boolean for compression/write protect,
combining file/block posiition into one (saves a line)
and adding the missing alert-flags
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
it is rather pointless to let the user select something were there
is no choice. We have to keep the window though, since the user may
want to choose a pool
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
if a changer only has a single drive, there is no point in showing
a window with a DriveSelector, just do want the user wanted.
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
to make it more like a 'dangerous' remove window
also works in the singleDrive logic to hide/show the driveselector
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
for some storages, it is valuable information, e.g. if one has datastores
on separate datasets of the same zpool
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
I made some comparision with bombardier[0], the one listed here are
30s looped requests with two concurrent clients:
[ static download of ext-all.js ]:
lvl avg / stdev / max
none 1.98 MiB 100 % 5.17ms / 1.30ms / 32.38ms
fastest 813.14 KiB 42 % 20.53ms / 2.85ms / 58.71ms
default 626.35 KiB 30 % 39.70ms / 3.98ms / 85.47ms
[ deterministic (pre-defined data), but real API call ]:
lvl avg / stdev / max
none 129.09 KiB 100 % 2.70ms / 471.58us / 26.93ms
fastest 42.12 KiB 33 % 3.47ms / 606.46us / 32.42ms
default 34.82 KiB 27 % 4.28ms / 737.99us / 33.75ms
The reduction is quite better with default, but it's also slower, but
only when testing over unconstrained network. For real world
scenarios where compression actually matters, e.g., when using a
spotty train connection, we will be faster again with better
compression.
A GPRS limited connection (Firefox developer console) requires the
following load (until the DOMContentLoaded event triggered) times:
lvl t x faster
none 9m 18.6s x 1.0
fastest 3m 20.0s x 2.8
default 2m 30.0s x 3.7
So for worst case using sligthly more CPU time on the server has a
tremendous effect on the client load time.
Using a more realistical example and limiting for "Good 2G" gives:
none 1m 1.8s x 1.0
fastest 22.6s x 2.7
default 16.6s x 3.7
16s is somewhat OK, >1m just isn't...
So, use default level to ensure we get bearable load times on
clients, and if we want to improve transmission size AND speed then
we could always use a in-memory cache, only a few MiB would be
required for the compressable static files we server.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Thomas Lamprecht
Stefan Reiter
Dominik Csapak
Dietmar Maurer