this fixes the leaked memory for the cache, as we had only pointers
in the map/list which were freed, not the underlying chunks
moves the 'clear' implementation out of the trait bounds so that
Drop can reuse it
this is used e.g. for file download from a pxar
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
(cherry picked from commit 98983a9dab)
this was also leaking a refcount before, this is fixed now
See-also: proxmox/proxmox-async:
* d0a3e38006fe ("drop RawWaker usage")
* ff132e93c6fd ("rustfmt")
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
send_command serializes everything so it cannot be used to send a
raw, optimized command. Normally that means we get an error like
> 'unable to parse parameters (expected json object)'
when used that way.
Switch over to send_raw_command which does not re-serializes the
command.
Fixes: 45b8a032 ("refactor send_command")
Originally-by: Dominik Csapak <d.csapak@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
This lock is held during VM startup, so that multiple calls will not
start VMs twice. But this means that the timeout needs to incorporate
the time it might take a VM to boot, so increase it quite a bit.
This could previously lead to "interrupted system call" errors when
accessing backups with many disks.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
(cherry picked from commit 66501529a2)
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
to make the log more useful..
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
(cherry picked from commit 9a06eb1618)
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
(cherry picked from commit 309e14ebb7)
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
During startup most of the stuff is happening in milliseconds (or
less), so the timestamp granularity of seconds made it hard to tell
if the previous command required 990ms or 1ms, which is quite the
difference in the restore daemon context.
Using micros seems not to bring too much additional information, a
millisecond is already an ok lower time resolution for logging, so
switch only to millis for now.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
(cherry picked from commit ecd66ecaf6)
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
fixes file restore again.
The new Memcom tracking file lives in `/run/proxmox-backup` and is
always created on REST interaction, as CachedUserInfo uses it to
efficiently track config changes, and such a cache is used in each
REST handle_request.
Further, the Memcom infra expects the base run PBS dir to exists
already, which is an OK assumption to have, but in the file-restore
daemon we have a significantly more minimal environment, and the run
dir was simply not required there, even /run isn't a tmpfs yet.
Fixes fda19dcc6f ("fix CachedUserInfo by using a shared memory version counter")
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
(cherry picked from commit 33d7292f29)
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
We send it already to the user via the response body, but the
log_response does not has, nor wants to have FWIW, access to the
async body stream, so pass it through the ErrorMessageExtension
mechanism like we do else where.
Note that this is not only useful for PBS API proxy/daemon but also
the REST server of the file-restore daemon running inside the restore
VM, and it really is *very* helpful to debug things there..
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
(cherry picked from commit f4d371d2d2)
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
(cherry picked from commit 2d48533378)
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
the dns plugin config allow for a specified amount of time to wait for
the TXT record to be set and propagated through DNS.
This patch adds a sleep for this amount of time.
The log message was taken from the perl implementation in proxmox-acme
for consistency.
Tested with the powerdns plugin in my test setup.
Signed-off-by: Stoiko Ivanov <s.ivanov@proxmox.com>
(cherry picked from commit 3f84541412)
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
we need the setting in acme::plugin.
Signed-off-by: Stoiko Ivanov <s.ivanov@proxmox.com>
(cherry picked from commit 4d8bd03668)
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
extract_challenge is used by both dns-01 and http-01 challenges.
Signed-off-by: Stoiko Ivanov <s.ivanov@proxmox.com>
(cherry picked from commit f9bd5e1691)
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
(cherry picked from commit 13a2445744)
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
So callers get more stable results. Most noticeable, the disk list in
the web UI doesn't jump around upon reloading, and while sorting could
be done directly there, like this other callers get the benefit too.
Signed-off-by: Fabian Ebner <f.ebner@proxmox.com>
(cherry picked from commit bbff317aa7)
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
in preparation to also get the file system type from lsblk.
Co-developed-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
Signed-off-by: Fabian Ebner <f.ebner@proxmox.com>
(cherry picked from commit 364299740f)
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
a match expresses the fallback slightly nicer and needs no mut,
which is always nice to avoid.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
(cherry picked from commit 6b5013edb3)
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
According to crypt(3):
"crypt places its result in a static storage area, which will be
overwritten by subsequent calls to crypt. It is not safe to call crypt
from multiple threads simultaneously."
This means that multiple login calls as a PBS-realm user can collide and
produce intermittent authentication failures. A visible case is for
file-restore, where VMs with many disks lead to just as many auth-calls
at the same time, as the GUI tries to expand each tree element on load.
Instead, use the thread-safe variant 'crypt_r', which places the result
into a pre-allocated buffer of type 'crypt_data'. The C struct is laid
out according to 'lib/crypt.h.in' and the man page mentioned above.
Use the opportunity and make both arguments to the rust 'crypt' function
take a &[u8].
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
(cherry picked from commit c4c4b5a3ef)
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
(cherry picked from commit 9f5b57a348)
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
(cherry picked from commit aceae32baa)
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
else we may double-build
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
(cherry picked from commit a2c73c78dd)
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
and not on window close
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
(cherry picked from commit 82cae19d19)
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
While the PVE one "bails" too, it has an eval around those and moves
the error to the message property, so lets do so too to ensure a user
can force an update on a too old subscription
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
(cherry picked from commit b81818b6ad)
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
we try to load the correct media in a loop until we find the correct tape.
when encountering an error or wrong tape, we want to log that (and send
an email if one is set) that requests the correct tape.
while trying to avoid printing the same errors more than once in a row,
we had at least one case (starting with an empty tape in the drive)
which would not print/send any tape request.
reworking that code to use a custom 'TapeRequest' enum, which contains
the state + error message, and a helper that prints and sends an email
when the state changes
this reduces the change check/log to a single variable, instead of 4
(tried, last_media_uuid, last_error, failure_reason)
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Signed-off-by: Dietmar Maurer <dietmar@proxmox.com>
Add test code to the first locate_file command, compute locate_offset.
Subsequent locate_file commands use that offset.
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Signed-off-by: Dietmar Maurer <dietmar@proxmox.com>
we have a static list of filesystems and their capabilities regarding
file attributes and fs features (e.g. sockets/fifos/etc) which also
includes xattrs,acls and fcaps
if we did not know a filesystem by its magic number (for example cephfs),
we did not even attempt to read xattrs, etc.
this patch adds those flags by default to unknown filesystems, and
removes them when we encounter EOPNOTSUPP (to remove the number
of syscalls)
with this, we should be able to catch xattrs/acls/fcaps on all
(unknown) fs types that support them
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
since the output:
Result: "<UPID>"
is not really interesting, show instead the task log while
the datastore is creating, since it is now run in a worker
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Setting this to 0 is not just useless, but breaks the logic horribly
enough to cause random segfaults - better forbid this, to avoid someone
else having to debug it again ;)
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
admin/datastore reads linearly only, so no need for cache (capacity of 1
basically means no cache except for the currently active chunk).
mount can do random access too, so cache last 8 chunks for possibly a
mild performance improvement.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
Implemented as a seperate struct SeekableCachedChunkReader that contains
the original as an Arc, since the read_at future captures the
CachedChunkReader, which would otherwise not work with the lifetimes
required by AsyncRead. This is also the reason we cannot use a shared
read buffer and have to allocate a new one for every read. It also means
that the struct items required for AsyncRead/Seek do not need to be
included in a regular CachedChunkReader.
This is intended as a replacement for AsyncIndexReader, so we have less
code duplication and can utilize the LRU cache there too (even though
actual request concurrency is not supported in these traits).
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
Supports concurrent 'access' calls to the same key via a
BroadcastFuture. These are stored in a seperate HashMap, the LruCache
underneath is only modified once a valid value has been retrieved.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
