The future needs to be removed from the pending map in any case, even if
it returned an error, else all upcoming calls to access this key will
always return the same error.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
Setting this to 0 is not just useless, but breaks the logic horribly
enough to cause random segfaults - better forbid this, to avoid someone
else having to debug it again ;)
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
admin/datastore reads linearly only, so no need for cache (capacity of 1
basically means no cache except for the currently active chunk).
mount can do random access too, so cache last 8 chunks for possibly a
mild performance improvement.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
Implemented as a seperate struct SeekableCachedChunkReader that contains
the original as an Arc, since the read_at future captures the
CachedChunkReader, which would otherwise not work with the lifetimes
required by AsyncRead. This is also the reason we cannot use a shared
read buffer and have to allocate a new one for every read. It also means
that the struct items required for AsyncRead/Seek do not need to be
included in a regular CachedChunkReader.
This is intended as a replacement for AsyncIndexReader, so we have less
code duplication and can utilize the LRU cache there too (even though
actual request concurrency is not supported in these traits).
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
Supports concurrent 'access' calls to the same key via a
BroadcastFuture. These are stored in a seperate HashMap, the LruCache
underneath is only modified once a valid value has been retrieved.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
Explicitly test that data will stay available and can be retrieved
immediately via listen(), even if the future producing the data and
notifying the consumers was already run in the past.
Wasn't broken or anything, but helps with understanding IMO.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
While the issue with vsock packets starving kernel memory is mostly
worked around by the '64k -> 4k buffer' patch in
'proxmox-backup-restore-image', let's be safe and also limit the number
of concurrent transfers. 8 downloads per VM seems like a fair value.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
The extract API call may be active for more than the watchdog timeout,
so a simple ping is not enough.
This adds an "inhibit" API, which will stop the watchdog from completing
as long as at least one WatchdogInhibitor instance is alive. Keep one in
the download task, so it will be dropped once it completes (or errors).
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
See this PR for more info: https://github.com/tokio-rs/tokio/pull/3756
As a workaround use a pair of connected unix sockets - this obviously
incurs some overhead, albeit not measureable on my machine. Once tokio
includes the fix we can go back to a DuplexStream for performance and
simplicity.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
Used to specify a filesystem placed directly on a disk, without a
partition table inbetween. Detected by simply attempting to mount the
disk itself.
A helper "make_dev_node" is extracted to avoid code duplication.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
A bucket might contain multiple (or 0) layers of components in its path
specification, so allow a mapping between bucket type strings and
expected component depth. For partitions, this is 1, as there is only
the partition number layer below the "part" node.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
Set PBS_QEMU_DEBUG=1 on a command that starts a VM and then connect to
the debug root shell via:
minicom -D \unix#/run/proxmox-backup/file-restore-serial-10.sock
or similar.
Note that this requires 'proxmox-backup-restore-image-debug' to work,
the postinst script is updated to also generate the corresponding image.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
A PCI bus can only support up to 32 devices, so excluding built-in
devices that left us with a maximum of about 25 drives. By adding a new
PCI bridge every 32 devices (starting at bridge ID 2 to avoid conflicts
with automatic bridges), we can theoretically support up to 8096 drives.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
The guest kernel requires more memory depending on how many disks are
attached. 256 seems to be enough for basically any reasonable and
unreasonable amount of disks though.
For debug instance, make it 1G, as these are never started automatically
anyway, and need at least 512MB since the initramfs (especially when
including a debug build of the daemon) is substantially bigger.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
Helps to clean up a VM that has crashed, is not responding to vsock API
calls, but still has a running QEMU instance.
We always check the process commandline to ensure we don't kill a random
process that took over the PID.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
This allows mounting XFS partitons with 'dirty' states, like from a
running VM. Otherwise XFS tries to write recovery information, which
fails on a read-only mount.
Tested-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Tested-by: Dominik Csapak <d.csapak@proxmox.com>
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
Drive serials have a character limit of 20, longer names like
"drive-virtio0.img.fidx" or "drive-efidisk0.img.fidx" would get cut off.
Fix this by removing the suffix, it is not necessary to uniquely
identify an image.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
With the vsock-pkt-buffer fix in proxmox-backup-restore-image, we can
use way less memory for the VM without risking any crashes. 128 MiB
seems to be the lowest it will go and still be fully reliable.
While at it, add the "panic=1" argument to the kernel command line, so
in case the kernel *does* run out of memory, it will at least restart
automatically.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
Read image sizes (.pxar.fidx/.img.didx) from manifest and partition
sizes from /sys/...
Requires a change to ArchiveEntry, as DirEntryAttribute::Directory
does not have a size associated with it (and that's probably good).
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
same functionality as crypto_parameters, except it keeps the file
descriptor passed as "keyfd" open (and seeks to the beginning after
reading), if one is given.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
For the actual partitions and blockdevices in a backup, which the
user sees like folders in the file-restore ui
Encoded as "None", to avoid cluttering DirEntryAttribute, where it
wouldn't make any sense to have.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
These can't be entered or restored anyway, and cause issues with catalog
files for example.
Also a clippy fix.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
Treat filepaths like "/root.pxar.didx" without a trailing slash as
wanting to download the entire archive content instead of erroring. The
zip-creation code already works fine for this scenario.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
The data on the restore daemon is either encoded into a pxar archive, to
provide the most accurate data for local restore, or encoded directly
into a zip file (or written out unprocessed for files), depending on the
'pxar' argument to the 'extract' API call.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
Encodes an entire local directory into an AsyncWrite recursively.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
extract_sub_dir_seq, together with seq_files_extractor, allow extracting
files from a pxar Decoder, along with the existing option for an
Accessor. To facilitate code re-use, some helper functions are extracted
in the process.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
Allows listing files and directories on a block device snapshot.
Hierarchy displayed is:
/archive.img.fidx/bucket/component/<path>
e.g.
/drive-scsi0.img.fidx/part/2/etc/passwd
(corresponding to /etc/passwd on the second partition of drive-scsi0)
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
This will be triggered on updating proxmox-file-restore (via configure,
necessary since the daemon binary might change) and
proxmox-backup-restore-image (via 'activate-noawait', necessary since
the base image might change).
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
Includes methods to start, stop and list QEMU file-restore VMs, as well
as CLI commands do the latter two (start is implicit).
The implementation is abstracted behind the concept of a
"BlockRestoreDriver", so other methods can be implemented later (e.g.
mapping directly to loop devices on the host, using other hypervisors
then QEMU, etc...).
Starting VMs is currently unused but will be needed for further changes.
The design for the QEMU driver uses a locked 'map' file
(/run/proxmox-backup/$UID/restore-vm-map.json) containing a JSON
encoding of currently running VMs. VMs are addressed by a 'name', which
is a systemd-unit encoded combination of repository and snapshot string,
thus uniquely identifying it.
Note that currently you need to run proxmox-file-restore as root to use
this method of restoring.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
Includes functionality for scanning and referring to partitions on
attached disks (i.e. snapshot images).
Fairly modular structure, so adding ZFS/LVM/etc... support in the future
should be easy.
The path is encoded as "/disk/bucket/component/path/to/file", e.g.
"/drive-scsi0/part/0/etc/passwd". See the comments for further
explanations on the design.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
Add a watchdog that will automatically shut down the VM after 10
minutes, if no API call is received.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
Implements the base of a small daemon to run within a file-restore VM.
The binary spawns an API server on a virtio-vsock socket, listening for
connections from the host. This happens mostly manually via the standard
Unix socket API, since tokio/hyper do not have support for vsock built
in. Once we have the accept'ed file descriptor, we can create a
UnixStream and use our tower service implementation for that.
The binary is deliberately not installed in the usual $PATH location,
since it shouldn't be executed on the host by a user anyway.
For now, only the API calls 'status' and 'stop' are implemented, to
demonstrate and test proxmox::api functionality.
Authorization is provided via a custom ApiAuth only checking a header
value against a static /ticket file.
Since the REST server implementation uses the log!() macro, we can
redirect its output to stdout by registering env_logger as the logging
target. env_logger is already in our dependency tree via zstd/bindgen.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
This allows switching the base user identification/authentication method
in the rest server. Will initially be used for single file restore VMs,
where authentication is based on a ticket file, not the PBS user
backend (PAM/local).
To avoid putting generic types into the RestServer type for this, we
merge the two calls "extract_auth_data" and "check_auth" into a single
one, which can use whatever type it wants internally.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
Add a new module containing key-related functions and schemata from all
over, code moved is not changed as much as possible.
Requires adapting some 'use' statements across proxmox-backup-client and
putting the XDG helpers quite cozily into proxmox_client_tools/mod.rs
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
Pass in an optional auth tag, which will be passed as an Authorization
header on every subsequent call.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
...including common schemata, connect(), extract_*() and completion
functions.
For later use with proxmox-file-restore binary.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
...to take advantage of the aio::Encoder from the pxar create.
Rather straightforward conversion, but does require getting rid of
references in the Archiver struct, and thus has to be given the Mutex
for the catalog directly. The callback is boxed.
archive_dir_contents can call itself recursively, and thus needs to
return a boxed future.
Users are adjusted, namely PxarBackupStream is converted to use an
Abortable future instead of a thread so it supports async in its handler
function, and the pxar bin create_archive is converted to an async API
function. One test case is made to just use 'block_on'.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
Currently useful only for single file restore, but kept generic enough
to use any compatible API endpoint over a virtio-vsock[0,1] interface.
VsockClient is adapted and slimmed down from HttpClient.
A tower-compatible VsockConnector is implemented, using a wrapped
UnixStream as transfer. The UnixStream has to be wrapped in a custom
struct to implement 'Connection', Async{Read,Write} are simply forwarded
directly to the underlying stream.
[0] https://www.man7.org/linux/man-pages/man7/vsock.7.html
[1] https://wiki.qemu.org/Features/VirtioVsock
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
This allows anything that can be represented as a UnixStream to be used
as transport for an API server (e.g. virtio sockets).
A tower service expects an IP address as it's peer, which we can't
reliably provide for unix socket based transports, so just fake one.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
Use timeout futures for sections that might hang in certain error
conditions. This is mostly intended to be used as a safeguard, not a
first line of defense - i.e. best-effort avoidance of total hangs.
Not every future used for the HttpClient/H2Client is changed, only those
where a quick response is to be expected. For example, the response
reading futures are left alone, so data transfer is never capped with
timeout, only the initial server connect.
It is also used for upgrading to H2 connections, as that can take a long
time on overloaded servers.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
Simplify the phase 2 code by treating .bad files just like regular
chunks, with the exception of stat logging.
To facilitate, we need to touch .bad files in phase 1. We only do this
under the condition that 1) the original chunk is missing (as before),
and 2) the original chunk is still referenced somewhere (since the code
lives in the error handler for a failed chunk touch, it only gets called
for chunks we expect to be there, i.e. ones that are referenced).
Untouched they will then be cleaned up after 24 hours (or after the last
longer-running task finishes).
Reason 2) is also a fix for .bad files not being cleaned up at all if
the original is no longer referenced anywhere (e.g. a user deleting all
snapshots after seeing some corrupt chunks appear).
cond_touch_path is introduced to touch arbitrary paths in the chunk
store with the same logic as touching chunks.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
If a package is or will be installed from the enterprise repo, retrieve
the changelog from there as well (securely via HTTPS and authenticated
with the subcription key).
Extends the get_string method to take additional headers, in this case
used for 'Authorization'. Hyper does not have built-in basic auth
support AFAICT but it's simple enough to just build the header manually.
Take the opportunity and also set the User-Agent sensibly for GET
requests, just like for POST.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
For proxmox packages it works the same way as PVE, by retrieving the
changelog URL and issuing a HTTP GET to it, forwarding the output to the
client. As this is only supposed to be a workaround removed in the
future, a simple block_on is used to avoid async.
For debian packages we can simply call 'apt-get changelog' and forward
it's output.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
As always, libapt is mocking us with complexity, but we can get the
approximate result we want by retrieving dependencies of all
to-be-updated packages and then seeing if they are missing.
If they are, we assume they will be installed.
For this, query_detailed_info is extended to allow reading details for
non-installed packages, and this is also exposed in
list_installed_apt_packages via 'all_versions_for'. This is necessary so
we can retrieve changelogs for such packages.
Note that we cannot retrieve all that information all the time, as
querying details for packages that aren't installed takes a rather long
time.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
Avoids custom hardcoded logic, but can only be used for debian packages
as of now. Adds a FIXME to switch over to use --print-uris only once our
package repos support that changelog format.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
To get package details for a specific version instead of only the
candidate.
Also cleanup filter function with extra struct instead of unnamed &str
parameters.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
...to avoid having the tools:: module depend on api2.
The get_string function is based directly on hyper and thus relatively
simple, not supporting redirects for example.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
To cater to the paranoid, a new datastore-wide setting "verify-new" is
introduced. When set, a verify job will be spawned right after a new
backup is added to the store (only verifying the added snapshot).
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
Force consumers to use the lookup_datastore method instead of
potentially opening a datastore twice, and pass the config we have
already loaded into open_with_path, removing the need for open(1).
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
Commit 9070d11f4c introduced this change for other call sites,
assuming it is correct, this one was missed.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
Rewrite most of the documentation to be more readable and correct
(according to the current implementations).
Add a table visualizing all different locks used to synchronize
concurrent operations.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
Contains a link to the 'backup' module's doc, as that explains a lot
about the inner workings of PBS and probably marks a good entry point
for new readers.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
Avoid races when updating manifest data by flocking a lock file.
update_manifest is used to ensure updates always happen with the lock
held.
Snapshot deletion also acquires the lock, so it cannot interfere with an
outstanding manifest write.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
Removing a snapshot has some more safety checks which we don't want to
ignore when removing an entire group (i.e. locking the manifest and
notifying GC).
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
There's no point in having that as a seperate method, just parse the
thing into a struct and write it back out correctly.
Also makes further changes to the method simpler.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
If we can't acquire a lock (either because the snapshot disappeared, it
is about to be forgotten/pruned, or it is currently still running) skip
the snapshot. Hold the lock during verification, so that it cannot be
deleted while we are still verifying.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
...to avoid it being forgotten or pruned while in use.
Update lock error message for deletions to be consistent.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
To allow other reading operations on the base snapshot as well. No
semantic changes with this patch alone, as all other locks on snapshots
are exclusive.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
A removal can fail if the snapshot is already gone (this is fine, our
job is done either way) or we couldn't get a lock (also fine, it can't
be removed then, just warn the user so he knows what happened and why it
wasn't removed) - keep going either way.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
A snapshot that's currently being read can still appear in the prune
list, but should not be removed.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
If a fuse_loop instance dies suddenly (e.g. SIGKILL), the FUSE mount and
loop device assignment are left behind. We can determine this scenario
on specific unmap, when the PID file is either missing or contains a PID
of a non-running process, but the backing file and potentially loop
device are still there.
If that's the case, do an "emergency cleanup", by unassigning the
loopdev, calling 'fusermount -u' and then cleaning any leftover files
manually.
With this in place, pretty much any situation is now recoverable via
only the 'proxmox-backup-client' binary, by either calling 'unmap' with
or without parameters.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
On unmap, only report success if the instance we are killing actually
terminates. This is especially important so that cleanup routines can be
assured that /run files are actually cleaned up after calling
cleanup_unused_run_files.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
A 'map' call will only clean up what it needs, that is only leftover
files or dangling instances of it's own name.
For a full cleanup the user can call 'unmap' without any arguments.
The 'cleanup on error' behaviour of map_loop is removed. It is no longer
needed (since the next call will clean up anyway), and in fact fixes a
bug where trying to map an image twice would result in an error, but
also cleanup the .pid file of the running instance, causing 'unmap' to
fail afterwards.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
So user doesn't need to remember which loop devices he has mapped to
what.
systemd unit encoding is used to transform a unique identifier for the
mapped image into a suitable name. The files created in /run/pbs-loopdev
will be named accordingly.
The encoding all happens outside fuse_loop.rs, so the fuse_loop module
does not need to care about encodings - it can always assume a name is a
valid filename.
'unmap' without parameter displays all current mappings. It's
autocompletion handler will list the names of all currently mapped
images for easy selection. Unmap by /dev/loopX or loopdev number is
maintained, as those can be distinguished from mapping names.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
Allows mapping fixed-index .img files (usually from VM backups) to be
mapped to a local loopback device.
The architecture uses a FUSE-backed temp file mapped to a loopdev:
/dev/loopX -> FUSE /run/pbs-loopdev/xxx -> backup client -> PBS
Since unmapping requires some cleanup (unmap the loopdev, stop FUSE,
remove the temp files) a special 'unmap' command is added, which uses a
PID file to send SIGINT to the backup-client instance started with
'map', which will handle the cleanup itself.
The polling with select! in mount.rs needs to be split in two, since we
have a chicken and egg problem between running FUSE and setting up the
loop device - so we need to do them concurrently, until the loopdev is
assigned, at which point we can report success and daemonize, and then
continue polling the FUSE loop future.
A loopdev module is added to tools containing all required functions for
mapping a loop device to the FUSE file, with the ioctls moved into an
inline module to avoid exposing them directly.
The client code is placed in the 'mount' module, which, while
admittedly a loose fit, allows reuse of the daemonizing code.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
Causes a panic if last_update is smaller than RRD_DATA_ENTRIES*reso,
which (I believe) can happen when inserting the first value for a DB.
Clamp the value to 0 in that case.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
Fix a potential bug where errors that happen after the SendHandle has
been dropped while doing the thread join might have been ignored.
Requires internal check_abort to be moved out of 'impl SendHandle' since
we only have the Mutex left, not the SendHandle.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
A client can omit uploading chunks in the "known_chunks" list, those
then also won't be written on the server side. Check all those chunks
mentioned in the index but not uploaded for existance and report an
error if they don't exist instead of marking a potentially broken backup
as "successful".
This is only important if the base snapshot references corrupted chunks,
but has not been negatively verified. Also, it is important to only
verify this at the end, *after* all index writers are closed, since only
then can it be guaranteed that no GC will sweep referenced chunks away.
If a chunk is found missing, also mark the previous backup with a
verification failure, since we know the missing chunk has to referenced
in it (only way it could have been inserted to known_chunks with
checked=false). This has the benefit of automatically doing a
full-upload backup if the user attempts to retry after seeing the new
error, instead of requiring a manual verify or forget.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
Do not allow clients to reuse chunks from the previous backup if it has
a failed validation result. This would result in a new "successful"
backup that potentially references broken chunks.
If the previous backup has not been verified, assume it is fine and
continue on.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
We need to update the atime of chunk files if they already exist,
otherwise a concurrently running GC could sweep them away.
This is protected with ChunkStore.mutex, so the fstat/unlink does not
race with touching.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
The iterator of get_chunk_iterator is extended with a third parameter
indicating whether the current file is a chunk (false) or a .bad file
(true).
Count their sizes to the total of removed bytes, since it also frees
disk space.
.bad files are only deleted if the corresponding chunk exists, i.e. has
been rewritten. Otherwise we might delete data only marked bad because
of transient errors.
While at it, also clean up and use nix::unistd::unlinkat instead of
unsafe libc calls.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
This ensures that following backups will always upload the chunk,
thereby replacing it with a correct version again.
Format for renaming is <digest>.<counter>.bad where <counter> is used if
a chunk is found to be bad again before a GC cleans it up.
Care has been taken to deliberately only rename a chunk in conditions
where it is guaranteed to be an error in the chunk itself. Otherwise a
broken index file could lead to an unwanted mass-rename of chunks.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
Anyone with a PAM account and Sys.Console access could have started a
termproxy session, adapt the regex.
Always test for broken entries and run the sed expression to make sure
eventually all occurences of the broken syntax are fixed.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
To prevent forgetting the base snapshot of a running backup, and catch
the case when it still happens (e.g. via manual rm) to at least error
out instead of storing a potentially invalid backup.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
