1. Use same height as width
2. drop the top/bottom "frame" lines
3. instead of two "bearings" side by side, like VHS or music-compact
tapes have, use a single bearing and an outer circle to denote the
magnetic tape edge
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
instead of silently discarding the error, else the user might be
confused because nothing happened
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
by adding the existing credential id to the 'excludeCredentials' list
this prevents the browser from registering a token twice, which
lets authentication fail on some browser/token combinations
(e.g. onlykey/solokey+chromium)
while is seems this is currently a bug in chromium, in a future spec
update the underlying behaviour should be better defined, making this
an authenticator bug
also explicitly catch registering errors and show appropriate error messages
0: https://bugs.chromium.org/p/chromium/issues/detail?id=1087642
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
even if the options *could* be set in the frontend, the backend
actually has to do validation of those settings, thus we should not
make that a browser setting
additionally, having the value 'preferred' does not actually make sense,
since it does not add any security (the backend skips the
userverification check then)
This reverts commit aca4c2b5a9.
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
If the usage of a datastore did not change, we did not
return an estimate. The ui interpreted this as 'not enough data', but
it should actually be 'never'.
Fixing this by always setting the estimate first to 0 and overwriting
if we successfully calculated one, and checking for 'undefined' in the ui.
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
since the status api call blocks the drive, it only makes sense to do
when the drive is idle.
so do not reload on activate, but when the drive changes the first
time from busy to idle
also disable the reload button when the drive is busy
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
For tapes with many snapshots/group, a simple list of them is too
big. Instead, add a level for just the groups, this makes searching
for a specific backup much easier.
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
since reload is an async function, the view can be destroyed during
any 'await' point. Subsequent accesses to the view will fail, and we
will land in the catch. Check there if the view is destroyed, and
do not raise an error with the user then
also cancel any outstanding timer on 'deactivate' and 'destroy'
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
because we now select it directly in the left-hand tree
so we have to adapt the changer to the one set by the router
and not by the drop down field
and remove it from the TapeManagement tabpanel
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
and only check TapeManagement once in the init function
we now have 2 updatestores that update individually
(one for datastores, one for drives/changers)
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
by generalizing the isDataStorePath logic to a 'parseRouterPath'.
We still have to keep the isDataStore logic for tabpanel handling,
If we add tabs to changer-/drivestatus panels, we have to adapt
that too.
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
the DiffStore only updates the fiels given in the model, so we have to
list all the fields we depend on, else we have incomplete data,
e.g. for rendering
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
if the drive state is not empty, some action blocks it, so we cannot
do any task anyway. Since we now refresh the state every 5 seconds,
we can disable/enable them 'live'.
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
some fido2/webauthn keys can have a pin, and the client can request
a mode for the user verification.
'default' (no value set), lets the browser/device decide if the user has to
enter the pin of the device
'discouraged' requests that the user should not need to enter the pin
'preferred' requests that the user should need to enter the pin (if possible)
since we use webauthn only as a 2nd factor, having the user enter
the device pin on login may seem too much hassle for some users, so
give them the option
since this is a client option anyway, do not save it in the backend, but
in the browser local storage
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
mostly copied from pve (for now; will refactor when i add it to
pmg too (soon)) without the pve specific features like dashboard
storages
contains some eslint fixes comparing to pves window
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
the statement !a === "somestring" cannot be true since
!a is either true or false and thus not a string
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
an optimize the columns for smaller layouts (1280 width)
we show either:
* Idle
* spinner + status (if no upid)
* spinner + rendered UPID (clickable, opens task viewer)
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
We do not use the media location, so there is no need to update
the online status in the list_media call. Besides, we already update
the online status when we query the changer/status.
slot is already in the title of the grid, and hide it by default for
drives (the user does not need it there)
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
but auto-expand them, so no additional click is necessary
this shows the user which tapes are involved for the media sets
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
if a catalog is missing (or the loading otherwise throws an error), show
the error message in a msg box instead of a mask. this way a user can
still navigate the tree
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
by adapting and reusing the 'LabelMedia' window
shows a short notice about inserting the correct tape in the drive
and now allows to select a drive
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
listing the media can potentially hang (changer status), so do not
reload in the background, only on activate
also increase the timeout to 5 minutes and add a reload button
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
since tape commands can take a while and we do not want to change
all of those to worker tasks, increase the timeout to 5 minutes
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
do not only show if labeled, but the whole status (full/writeable/etc.)
and to which pool the tape belongs (if any)
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
instead of showing the snapshots directly under the pool and then the
media-sets, list the media-sets under the pool and only after the
snapshots
this has several advantages:
* we only have to read one set of tape catalog data on expand and not all of
them everytime (which does not scale)
* we can show media-sets without snapshots, this can happen when we
inventoried a set of tapes from another pbs instance, or lost the
catalog data somehow
the disadvantage is that one has to go look for the media set where the
snapshot is included, but we can solve this by implementing a search
function in the future (in the backend)
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
s/availabel/available/g
no semantic change at all
Signed-off-by: Oguz Bektas <o.bektas@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
we include all tasks whose type start with 'verif' in the type 'verify'
but if we want to actually show them in the pop-up, we have to reverse
map this back to 'verif', else there are tasks missing from there
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
and fix some issues from referenced named the same as their heading
they anchor too.
This should be fixed for real in our python plugin to scan for such
references, its probably a bug there, but as most of the problematic
ones where wrong (missing chapter prefix) anyway changing them is OK
too.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Co-Authored-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Tested-by: Oguz Bektas <o.bektas@proxmox.com>
Signed-off-by: Oguz Bektas <o.bektas@proxmox.com>
since we do not show the tapes anymore in the BackupOverview, add
another panel where we can list the available tapes in the inventory
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
instead of grouping by tape (which is rarely interesting),
group by pool -> group -> id -> mediaset
this way a user looking for a backup of specific vm can do just that
we may want to have an additional view here were we list all snapshots
included in the selected media-set ?
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
mostly typical CRUD interface for managing drives, with an
additional actioncolumn containing some useful actions, e.g.
* reading the label
* show volume-statistics
* show the status
* label the inserted tape
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
this lets the users manage changers and lets them view the status of one
by having an overview of:
* slots for tapes
* import/export slots
* drives
lets the user:
* barcode-label all the tapes in the library
* move tapes between slots, into/out of drives
* show some basic info when a tape is loaded into a drive
* show the status of a drive
* clean a drive
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
shows all tapes with the relevant info
* which pool it belongs to
* what backups are on it
* which media-set
* location
* etc.
This is very rough, and maybe not the best way to display this information.
It may make sense to reverse the tree, i.e. having pools at top-level,
then media-sets, then tapes, then snapshots..
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
includes edit windows for
* Drives
* Changers
* Media Pools
* Labeling Media
* Making new Tape Backups
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Fix two things:
* do not reject the login promise when we get the abort DOMException
error
* safely save the original challenge string as we work on a reference
here and avoid to convert to a UInt8 array twice to avoid an
exception.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
simple heuristic for those people who always prefer a specific TFA
method and have the others only as backup.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Improve UX by avoiding the need to click some buttons twice, or
calling TOTP and Recovery codes both "OTP" codes and showing multiple
buttons, with all having the same goal "submit a TFA token" at the
same time.
Instead use a tab panel with a single submit button.
WebAuthn can and should be still improved, but that can be OK as
followup.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
userid parameter needs to be properly encoded when shown on the browser
Signed-off-by: Oguz Bektas <o.bektas@proxmox.com>
Reviewed-by: Dominik Csapak <d.csapak@proxmox.com>
This is wrong most of the time, when not loading the web interface
with valid credentials, and thus some checks or defaults did not
evaluated correctly when the underlying value was only set later.
Needs to be set on component creation only, this can be done through
initComponent, even listeners, view controllers or cbind closures.
Use the latter, as all affected components already use cbind.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
present all relevant information about the TFA token to be removed,
so that a user can make a better decision.
Rework layout to match our commonly used style.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Clarify that the password of the user one wants to add TFA too is
required, which is not necessarily the one of the current logged in
user. Use an empty text for that.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
the password field should not be indented differently than the rest of
the fields, and we never have a border on the panels
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
we can reuse the edit window from widget toolkit for the most part
this solves some spacing and layout issues and is less code
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
an empty schedule means 'none', so do not fill it with the default
in case we edit an existing job (like we do already for sync jobs)
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
findRecord does not match exactly, but only at the beginning and
case insensitive, by default. Change all calls to be case sensitive
and an exactmatch (we never want the default behaviour afaics).
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
used in the PBS GUI, but also for PVE usage queries which don't need all
the extra expensive information..
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
avoids that it shows during store load, we do not know if there are
no datastores at that point and have already a loading mask.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
when we could not load the config (e.g. missing permissions)
show the comment from the global datastore-list
also show a messagebox for a load error instead of setting
the text of the comment box
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
the .lint-incremental target, which is implicitly used by the install
target, is still more forgiving to allow faster "change, build, test"
iteration when developing.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Without hyphens, we had 20 hex digits, so ~80 bit which is probably overkill.
Use 12 (13 with hyphen), this is still 48 bit.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
add missing help buttons (question mark, top right) so that we are
consistent and each panel has it.
I chose the IMHO most fitting sections.
Signed-off-by: Aaron Lauterer <a.lauterer@proxmox.com>
its rather hacky, but our cbind mixin does not support columns (yet).
if it does sometime in the future, we could use that instead
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
added a few more help buttons were appropriate:
* GC and Prune schedule windows
* Create Directory window
* API Tokens, link directly to token section
* verify jobs window
Signed-off-by: Aaron Lauterer <a.lauterer@proxmox.com>
changes the layout to look i little bit more like the statistics panel
we have for ceph in pve, while changing to the UsageChart and adding
some more datastore infos (from last garbage collect)
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
heavily inspired by pveRunningChart, without the dynamically adding
of data and specific for the usage of datastores
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Fix font-size to 14px to improve font-awesome rendering, add some
slight margin between the buttons so that they are not glued
together, add a slight text-shadow on mouse over.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
a panel for a single datastore that gets updated from an external caller
shows the usage, estimated full date, history and task summary grid
a panel that dynamically generates the panel above for each datastore
and a tabpanel that includes the panel above, as well as a global
syncview, verifiyview and aclview
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
this makes it a little easier to provide good data, without
hardcoding all types in the source object
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
it seems that under certain circumstances, extjs does not initialize
or remove the content from objects in controllers
move it to the view, were they always exist
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
we want to use this panel again for a 'global' overview, without
any datastore preselected, so we have to handle that, and
adding a datastore selector in the editwindow
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
to parse the datastore out of a worker_id
for this we need some regexes that are the same as in the backend
for now we only parse out the datastore, but we can extend this
in the future to parse relevant info (e.g. remote for syncs,
id/type for backups)
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
since just the ACLs defined on the exact datastore path don't give
anywhere near a complete picture of who has access to it.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
with the "change owner" action added we now need more than the
default of 100 px, so increase to 120 px for now.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
slightly adapted, i.e., the delete_if_default helper always sets the
delete property to an array if not existing.
Also, filtering out undefined values when printing properties.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Extension of fix#2847
Adds an action button to the datastore content view,
to change the owner of a backup.
Signed-off-by: Dylan Whyte <d.whyte@proxmox.com>
Includes some eslint fixes and label changes as well, was to much
work to split that out in its own commit.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
this is a panel that is heavily inspired from widget-toolkits
node/Tasks panel, but is adapted to use the extended api calls of
pbs (e.g. since/until filter)
has 'filter' panel (like pmgs log tracker gui), but it is collapsible
if we extend the api calls of the other projects, we can merge this
again into the widget-toolkit one and use that
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
and change all users of the /status/tasks api call to this
with this change we can now delete the /status/tasks api call
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
instead of hard-coding 'backup@pam'. this allows a bit more flexibility
(e.g., syncing to a datastore that can directly be used as restore
source) without overly complicating things.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
Avoid overuse of flex, that is as bad as having all to fixed widths.
In spirit similar to the previous commit for the verify panel, see
that for some rationale.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Avoid overuse of flex, that is as bad as having all to fixed widths.
* Set date-time fields to 150 px as they are fixed width text.
* Duration is maximal 3 units, so it can be made fixed too.
* Schedule is flex with lower and upper limits, this is useful as
it's a field which can be both, quite short (daily) or long
(mon..fri *-10..12-1..7 02:00/30:30)
* Status and comment is flex, this way we always get a filled grid
Move status after last verify date and duration field, increases
information density at the left of the grid - reducing need for eye
movement, also, it groups together the "information about last job"
nicer.
Show job-id by default even if they are auto generated when adding
over the gui, as it can help finding the respective job faster when
getting a mail with an error.
Reported-by: Dietmar Maurer <dietmar@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
orient on PVE, the ones for Updates, ServerStatus, should by
self-explanatory.
Services is in PVE named "System", but reusing that cogs icon makes
similar sense here too, and seems in line with search result of a
"service icons" query.
Syslog is the same as our general log icon, but as we also use this
normally for worker task logs and that is present here too, I
changed the worker task log icon to the alternative list, which
resembles a task view window - so IMO even better than before.
Sync that change also into the always present tasks button at the top
right.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
in most generic places. this is accompanied by a change in
RpcEnvironment to purposefully break existing call sites.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
the config is shared between multiple datastores with the ID as, well
the unique ID, but we only show those of a single datastore.
So if a user adds a new one with a fixed ID "12345" but a job with
that ID exists already on another store, they get a error about
duplicate IDs, but cannot relate as that duplicate job is not visible
(filtered away)
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
by moving the properties of the storage status out again to the top
level object
also introduce proper structs for the types used, to get type-safety
and better documentation for the api calls
this changes the backup counts from an array of [groups,snapshots] to
an object/struct with { groups, snapshots } and include 'other' types
(though we do not have any at this moment)
this way it is better documented
this also adapts the ui code to cope with the api changes
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
the "comment" is the first line of the "notes" field from a manifest,
show it in the grid and allow editing the full notes.
Hack the click event listener a bit together for the right aligned
edit action button, but it works out well and is efficient (only one
event listener is much cheaper than per-buttons ones).
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Choosing a good icon is hard here, while the magnifying glass is
somewhat relatable, it reminds to much of a "Search" function, which
can be quite confusing here.
So use a simple "V.", even if it's probably also not to ideal..
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
so that the last selected tab for datastores will get selected
the next time any datastore is selected, even across browser
reloads
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
this fixes some bugs related to selection handling in the treelist:
* datastores were not selected after a reload
* reloading when in a tabpanel on any tab but the first, would
not select a treenode
* changing between datastores on any tab but the first would
not select the same tab on the new datastore
fixed those by mostly rewriting the changePath handling for
datastores and tabpanels in general
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
and make 'Datastore' unclickable
since we have all options and information on the relevant datastore panels,
we do not need a datastore config anymore (besides the creation,
which we add here)
this also fixes the sorted insertion and removal of new/old datastores
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
add the datastore as parameter for the store, remove
the datastore selector for the edit windows and give the datastore
to it instead
also remove the autostart from the rstore, since we only want to start
it when we change to the relevant tab
and add icons for all other datastore tabs
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
this adds a 'Summary' panel to the datastores, similar to what we have
for PVE's nodes/guests/storages
contains an info panel with useful information, a comment field, and
the charts from the statistics panel (which can be deleted since it is
not necessary any more)
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
a simple objectgrid to display datastore gc/prune options
needs the prune inputpanel to be refactored in its own class
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
by using the new ZipEncoder and recursively add files to it
the zip only contains directories, normal files and hardlinks (by simply
copying the content), no symlinks, etc.
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
for now this isn't needed and would take quite a bit of effort to
match the API schema with PVE.
if there are a lot of requests at some point we can add it in.
Signed-off-by: Oguz Bektas <o.bektas@proxmox.com>
when clicking on a count in the summary, a small task overlay now pops
up that shows those tasks. this way, the user has an easy way
of seeing which tasks failed exactly
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
by moving the definition into the controller and dynamically use them
in the updateTasks function
we will reuse/extend this later
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
we showed 'last month' even if we did not limit the api call
implement that and make the number of days configurable
(we have most of the code already available for that, since
the base dashboard got copied from pmg and never cleaned up)
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
while restructuring the docs, explicit title wasn't included in the
correct file
fixes commit 04e24b14f0
Signed-off-by: Oguz Bektas <o.bektas@proxmox.com>
