Add test code to the first locate_file command, compute locate_offset.
Subsequent locate_file commands use that offset.
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Signed-off-by: Dietmar Maurer <dietmar@proxmox.com>
we have a static list of filesystems and their capabilities regarding
file attributes and fs features (e.g. sockets/fifos/etc) which also
includes xattrs,acls and fcaps
if we did not know a filesystem by its magic number (for example cephfs),
we did not even attempt to read xattrs, etc.
this patch adds those flags by default to unknown filesystems, and
removes them when we encounter EOPNOTSUPP (to remove the number
of syscalls)
with this, we should be able to catch xattrs/acls/fcaps on all
(unknown) fs types that support them
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
since the output:
Result: "<UPID>"
is not really interesting, show instead the task log while
the datastore is creating, since it is now run in a worker
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Setting this to 0 is not just useless, but breaks the logic horribly
enough to cause random segfaults - better forbid this, to avoid someone
else having to debug it again ;)
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
admin/datastore reads linearly only, so no need for cache (capacity of 1
basically means no cache except for the currently active chunk).
mount can do random access too, so cache last 8 chunks for possibly a
mild performance improvement.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
Implemented as a seperate struct SeekableCachedChunkReader that contains
the original as an Arc, since the read_at future captures the
CachedChunkReader, which would otherwise not work with the lifetimes
required by AsyncRead. This is also the reason we cannot use a shared
read buffer and have to allocate a new one for every read. It also means
that the struct items required for AsyncRead/Seek do not need to be
included in a regular CachedChunkReader.
This is intended as a replacement for AsyncIndexReader, so we have less
code duplication and can utilize the LRU cache there too (even though
actual request concurrency is not supported in these traits).
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
Supports concurrent 'access' calls to the same key via a
BroadcastFuture. These are stored in a seperate HashMap, the LruCache
underneath is only modified once a valid value has been retrieved.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
Explicitly test that data will stay available and can be retrieved
immediately via listen(), even if the future producing the data and
notifying the consumers was already run in the past.
Wasn't broken or anything, but helps with understanding IMO.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
in PVE, the logic how wearout gets read from the smartctl output was
changed from a vendor -> id map to a sorted list of specific
attribute field names.
copy that list to pbs (in the same order), and use that to get the
wearout
in the future we might want to split the disk logic into its own crate
and reuse it in pve
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
if we want the empty value as a valid default value in a combogrid,
we have to explicitely select 'null' else the field will be marked as
dirty
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Reported-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
in case an invalid drive was configured, now it marks the field
invalid instead of autoselecting the first valid one
this could have lead to users configuring the wrong drive in a
tape-backup-job when they edited one
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Reported-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
we skip snapshots that are older than the newest snapshot of the group in
the target datastore, log it so the user can know why it is not synced
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
so that a user can remove a datastore from the gui,
though no data is deleted, this has to be done elsewhere (for now)
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
so that longer running creates (e.g. a slow storage), does not
run in a timeout and we can follow its creation
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Signed-off-by: Dietmar Maurer <dietmar@proxmox.com>
when we remove a datastore via api/cli, the proxy
has sometimes leftover references to that datastore in its
DATASTORE_MAP which includes an open filehandle on the
'.lock' file
this prevents unmounting/exporting the datastore even after removal,
only a reload/restart of the proxy did help
add a command to our command socket, which removes all non
configured datastores from the map, dropping the open filehandle
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Signed-off-by: Dietmar Maurer <dietmar@proxmox.com>
by implementing a custom error type that is either 'TimeOut' or
'Other'.
In the api, check in the worker loop for exactly 'TimeOut' errors and continue only
then. All other errors lead to a aborted task.
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
removing the backup dir must acquire the snapshot lock, else it can
happen that we remove a snapshot while it is being restored
or backed up to tape
the original commit that adds the force flag
(c9756b40d1)
mentions that the prune checks itself if the snapshot is in use,
but i could not find such code, so simply set force to false
to avoid failing and aborting the prune job, warn if it could not
and continue
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
so that the update does not get canceled because of a bad datastore
hide the irrelevant fields in that case
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
This reverts commit 75f9f40922, which is
no longer needed now that we use tokio >= 1.6 which contains the proper
fix.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
it contains a bug fix that allows dropping the workaround in
75f9f40922 file-restore-daemon: work around tokio DuplexStream bug
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
this is deprecated with rustc 1.52+, and will become a hard error at
some point:
https://github.com/rust-lang/rust/issues/79202
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
from the SspDataEncryptionCapabilityPage
it seems we do not need it, since the EXTDECC flag is only used for
determining if the drive is capable to be configured via
ADI (Automation/Drive Interface) which we do not use at all.
this makes the call work with LTO-4 again
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
this was previously set on the button class, but has since been removed
add it here to have the badge number centered again
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
by default the treelist gets the 'nav' ui, which in newer extjs
versions has a custom styling (unlike before)
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
by using beforedestroy instead of destroy (like we do everywhere else)
to avoid race condition when the controller has
already removed some handlers on destruction
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
using container here is fine, we do not need panel behaviour which
is more bloated. Removes two ARIA warnings.
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
looks (almost confusingly) empty else and no real disadvantage in
showing the disabled one until a media-set is selected and loaded
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
for that we need to split the prefilter additions, else
we always filter the snaphots too and giving 'undefined' filters
all snapshots...
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Dietmar Maurer
Dominik Csapak
Thomas Lamprecht
Wolfgang Bumiller
Stefan Reiter
Fabian Grünbichler