here's to note that the radio-group was my idea, Dominik just
executed it, nicely that is.
But, the panel looks a bit glitchy layout wise as with that and the
bandwidth fields (maybe we should render their unit inline) the
vertical alignments were all over the place.
So for now make it a simple text field and throw in a tooltip for
good measurement
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
delete on update and avoid sending an empty string in any case, the
backend does not likes that much.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
do not choke on non-numbers but use the (partially new) widget
toolkit helpers to also be able to parse string based sizes with
units and auto-scale them
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
adds a list of traffic control rules (with their current usage)
and let the user add/edit/remove them
the edit window currently has a grid for timeframes to add/remove
with input fields for start/endtime and checkboxes for the days
there are still some improvements possible, like having a seperate
grid for networks (the input field is maybe too small), or
optimizing consecutive days to a range (e.g. mon..wed instead of mon,tue,wed)
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Adapted from Dietmar's v3 on pbs-devel but some changes:
- reworked with a strip_suffix fn that does matching, way shorter and
even easier to read IMO
- make b/B byte symbol fully optional, not just for base-10
- also trim trailing whitespace for SizeUnit::Byte
- simplify the FromStr impl
- adapt parser unit tests such that we actually see the failed test's
definition line, simplifies debugging a bit
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
The new SizeUnit type takes over the auto scaling logic and could be
used on its own too.
Switch the internal type of HumanByte from u64 to f64, this results
in a slight reduce of usable sizes we can represent (there's no
unsigned float type after all) but we support pebibyte now with quite
the precision and ebibytes should be also work out ok, and that
really should us have covered for a while..
Partially adapted by Dietmar's version, but split up and change so:
* there's no None type, for a SizeUnit that does not makes much sense
* print the unit for byte too, better consistency and one can still
use as_u64() or as_f64() if they do not want/need the unit rendered
* left the "From usize/u64" impls intact, just convenient to have and
avoids all over the tree changes to adapt to loosing that
* move auto-scaling into SizeUnit, good fit there and I could see
some re-use potential for non-human-byte users in the future
* impl Display for SizeUnit instead of the separate unit_str method,
better usability as it can be used directly in format (with zero
alloc/copy) and saw no real reason of not having that this way
* switch the place where we auto-scale in HumanByte's to the new_X
helpers which allows for slightly reduced code usage and simplify
implementation where possible
* use rounding for the precision limit algorithm. This is a stupid
problem as in practices there are cases for requiring every variant:
- flooring would be good for limits, better less than to much
- ceiling would be good for file sizes, to less can mean ENOSPACE
and user getting angry if their working value is messed with
- rounding can be good for rendering benchmark, closer to reality
and no real impact
So going always for rounding is really not the best solution..
Some of those changes where naturally opinionated, if there's a good
practical reason we can switch back (or to something completely
different).
The single thing I kept and am not _that_ happy with is being able to
have fractional bytes (1.1 B or even 0.01 B), which just does not
makes much sense as most of those values cannot exist at all in
reality - I say most as multiple of 1/8 Byte can exists, those are
bits.o
Note, the precission also changed from fixed 2 to max 3 (trailing
zeros stripped), while that can be nice we should see if we get
a better precision limiting algorithm, e.g., directly in the printer.
Rust sadly does not supports "limit to precision of 3 but avoid
trailing zeros" so we'd need to adapt their Grisu based algorithm our
own - way to much complexity for this though..
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
by returning default data, in case the challenge data is not parseable.
this allows a new challenge to be started for the userid in question
without manual cleanup.
currently this can be triggered if an ongoing challenge created with
webauthn-rs 0.2.5 is stored in /run and attempted to be read
post-upgrade.
Reported-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
with current proxmox-tfa this became a hard error, since origin and rp
are not both Strings anymore..
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
we even use that for basically all the related schema names, "groups"
allone is just rather not so telling, i.e., "groups" what?
While due to the additive nature of `group-filter` is not the best
possible name for passing multiple arguments on the CLI (the web-ui
can present this more UX-friendly anyway) due to possible confusion
about if the filter act like AND vs OR it can be documented and even
if a user is confused they still are safe on more being synced than
less. Also, the original param name wasn't really _that_ better in
that regards
Dietmar also suggested to use singular for the CLI option, while
there can be more they're passed over repeating the option, each with
a single filter.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
and add a completion handler to complete the backup groups
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
this fixes bug #3533, since now a user can backup a single datastore
on multiple tape media pools in parallel, e.g. vms on one pool, ct on
another.
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
and convert existing (manually created/edited) jobs to the previous
default value of 'true'. the GUI has always set this value and defaults
to 'false'.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
Reviewed-by: Dominik Csapak <d.csapak@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
like for manual pulls, but persisted in the sync job config and visible
in the relevant GUI parts.
GUI is read-only for now (and defaults to no filtering on creation), as
this is a rather advanced feature that requires a complex GUI to be
user-friendly (regex-freeform, type-combobox, remote group scanning +
selector with additional freeform input).
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
Reviewed-by: Dominik Csapak <d.csapak@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
without requiring workarounds based on ownership and limited
visibility/access.
if a group filter is set, remove_vanished will only consider filtered
groups for removal to prevent concurrent disjunct filters from trashing
eachother's synced groups.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
Reviewed-by: Dominik Csapak <d.csapak@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
this is basically the sync job config without ID and some stuff
converted already, and a convenient helper to generate the http client
from it.
Suggested-by: Dominik Csapak <d.csapak@proxmox.com>
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
Reviewed-by: Dominik Csapak <d.csapak@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
instead of `GroupListItem`s. we convert it anyway, so might as well do
that at the start.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
Reviewed-by: Dominik Csapak <d.csapak@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Thomas Lamprecht
Dominik Csapak
Dietmar Maurer
Fabian Grünbichler
Wolfgang Bumiller
Stoiko Ivanov