It was not actually bad, so they're quite opinionated to be honest,
but at least xtypes props must go first and variable declaration
should try to be as near as possible to the actual use as long as
code stays sensible readable/short.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
a restore does not change the tape content, so a reload has no benefit here.
since we're touching those lines, change to 'autoShow' property
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
by including the new snapshotselector. If a whole media-set is to be
restored, select all snapshots
to achieve this, we drop the 'restoreid' and 'datastores' properties
for the restore window, and replace them by a 'prefilter' object
(with 'store' and 'snapshot' properties)
to be able to show the snapshots, we now have to always load the
content of that media-set, so drop the short-circuit if we have
the datastores already.
change the layout of the restore window into a two-step window
so that the first tab is the selection what to restore, and on the
second tab the user chooses where to restore (drive, datastore, etc.)
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
* handle not rendered call of getErrors
* return 'all' as value if all snaphots where selected
(for better distinction)
* remove the default height
* add checkChange on stores filterChange
(now change also fires on the gridfilter plugin change)
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
enable scrolling by default, and handle the case that getErrors gets
called when the component is not yet rendered
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
this will be used for letting the user select multiple, individual
snapshots on restore (instead of having a single or the whole media-set)
if a 'prefilter' object is given, we filter the grid by those
values using the gridfilter plugins (like in pve's bulk action windows)
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
instead of having them in the toolbar. This makes the UI more consistent
with the datastore content view.
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
when changin the remote, there is a high chance that there are different
datastores, and if a user does not pay attention, now the first store
of the new remote is selected, instead of the one with the same name
disable autoSelect and let the user manually select a remote datastore
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
we have 2 modi in that window:
* backup has multiple datastores
* backup has single datastore
In the first case we show a 'mapping' grid so that
the user can only restore a part. Here a user sees all source
Datastores and can select a target for each one.
In the second case we only have a single 'Datastore' selector, but
we do not show the source. Because of this, the naming is slightly ambiguous
(is it the 'Source' or the 'Target' ?), so rename it to 'Target Datastore'.
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
by checking for definedness of the label (tapes without barcode
have the empty string as label-text) and falling back to the
source slot for the load action
Note: Changed the load-slot API from PUT to POST
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Signed-off-by: Dietmar Maurer <dietmar@proxmox.com>
when the user start an action where we know that it locks the drive,
reload the tape store, so that the state is refreshed
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
if a user has not configured a drive for a specified driveslot of the
changer, simply hide that slot
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
datastore and tape entries are very similar but differ in some points
in such a way that a nice unification is not really that helpful, but
making similar key parts the same is still nice when reading the code
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
by using format_boolean for compression/write protect,
combining file/block posiition into one (saves a line)
and adding the missing alert-flags
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
it is rather pointless to let the user select something were there
is no choice. We have to keep the window though, since the user may
want to choose a pool
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
if a changer only has a single drive, there is no point in showing
a window with a DriveSelector, just do want the user wanted.
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
to make it more like a 'dangerous' remove window
also works in the singleDrive logic to hide/show the driveselector
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
for some storages, it is valuable information, e.g. if one has datastores
on separate datasets of the same zpool
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
To let users find the good explanation about allocation and retention
policies from the docs easier.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
by adding a custom field (grid) where the user can select
a target datastore for each source datastore on tape
if we have not loaded the content of the media set yet,
we have to load it on window open to get the list of datastores
on the tape
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
since we can now backup multiple datastores in the same media-set,
we show the datastores as first level below that
the final tree structucture looks like this:
tapepool A
- media set 1
- datastore I
- tape x
- ct/100
- ct/100/2020-01-01T00:00:00Z
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
this is much handier than number field, and the user can instantly
see which one is an import/export slot
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
so that the tape backup can be restored as any user, given
the current logged in user has the correct permission.
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
from 2 to 60 seconds. To retain the response time of the gui
when adding/editing/removing, trigger a manual reload on these actions
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
iterating over a nodeinterfaces children while removing them
will lead to 'child' being undefined
instead collect the children to remove in a separate list
and iterate over them
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Less anti-aliasing to do, so it looks better when small.
Note, I use a mask as else we could not cut out something
transparent, but only over paint it filled with white, which is not
the same and not how font awesome does it.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
1. Use same height as width
2. drop the top/bottom "frame" lines
3. instead of two "bearings" side by side, like VHS or music-compact
tapes have, use a single bearing and an outer circle to denote the
magnetic tape edge
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
instead of silently discarding the error, else the user might be
confused because nothing happened
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
by adding the existing credential id to the 'excludeCredentials' list
this prevents the browser from registering a token twice, which
lets authentication fail on some browser/token combinations
(e.g. onlykey/solokey+chromium)
while is seems this is currently a bug in chromium, in a future spec
update the underlying behaviour should be better defined, making this
an authenticator bug
also explicitly catch registering errors and show appropriate error messages
0: https://bugs.chromium.org/p/chromium/issues/detail?id=1087642
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
even if the options *could* be set in the frontend, the backend
actually has to do validation of those settings, thus we should not
make that a browser setting
additionally, having the value 'preferred' does not actually make sense,
since it does not add any security (the backend skips the
userverification check then)
This reverts commit aca4c2b5a9.
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>