when changin the remote, there is a high chance that there are different
datastores, and if a user does not pay attention, now the first store
of the new remote is selected, instead of the one with the same name
disable autoSelect and let the user manually select a remote datastore
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
we have 2 modi in that window:
* backup has multiple datastores
* backup has single datastore
In the first case we show a 'mapping' grid so that
the user can only restore a part. Here a user sees all source
Datastores and can select a target for each one.
In the second case we only have a single 'Datastore' selector, but
we do not show the source. Because of this, the naming is slightly ambiguous
(is it the 'Source' or the 'Target' ?), so rename it to 'Target Datastore'.
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
by checking for definedness of the label (tapes without barcode
have the empty string as label-text) and falling back to the
source slot for the load action
Note: Changed the load-slot API from PUT to POST
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Signed-off-by: Dietmar Maurer <dietmar@proxmox.com>
when the user start an action where we know that it locks the drive,
reload the tape store, so that the state is refreshed
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
if a user has not configured a drive for a specified driveslot of the
changer, simply hide that slot
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
datastore and tape entries are very similar but differ in some points
in such a way that a nice unification is not really that helpful, but
making similar key parts the same is still nice when reading the code
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
by using format_boolean for compression/write protect,
combining file/block posiition into one (saves a line)
and adding the missing alert-flags
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
it is rather pointless to let the user select something were there
is no choice. We have to keep the window though, since the user may
want to choose a pool
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
if a changer only has a single drive, there is no point in showing
a window with a DriveSelector, just do want the user wanted.
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
to make it more like a 'dangerous' remove window
also works in the singleDrive logic to hide/show the driveselector
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
for some storages, it is valuable information, e.g. if one has datastores
on separate datasets of the same zpool
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
To let users find the good explanation about allocation and retention
policies from the docs easier.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
by adding a custom field (grid) where the user can select
a target datastore for each source datastore on tape
if we have not loaded the content of the media set yet,
we have to load it on window open to get the list of datastores
on the tape
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
since we can now backup multiple datastores in the same media-set,
we show the datastores as first level below that
the final tree structucture looks like this:
tapepool A
- media set 1
- datastore I
- tape x
- ct/100
- ct/100/2020-01-01T00:00:00Z
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
this is much handier than number field, and the user can instantly
see which one is an import/export slot
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
so that the tape backup can be restored as any user, given
the current logged in user has the correct permission.
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
from 2 to 60 seconds. To retain the response time of the gui
when adding/editing/removing, trigger a manual reload on these actions
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
iterating over a nodeinterfaces children while removing them
will lead to 'child' being undefined
instead collect the children to remove in a separate list
and iterate over them
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Less anti-aliasing to do, so it looks better when small.
Note, I use a mask as else we could not cut out something
transparent, but only over paint it filled with white, which is not
the same and not how font awesome does it.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
1. Use same height as width
2. drop the top/bottom "frame" lines
3. instead of two "bearings" side by side, like VHS or music-compact
tapes have, use a single bearing and an outer circle to denote the
magnetic tape edge
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
instead of silently discarding the error, else the user might be
confused because nothing happened
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
by adding the existing credential id to the 'excludeCredentials' list
this prevents the browser from registering a token twice, which
lets authentication fail on some browser/token combinations
(e.g. onlykey/solokey+chromium)
while is seems this is currently a bug in chromium, in a future spec
update the underlying behaviour should be better defined, making this
an authenticator bug
also explicitly catch registering errors and show appropriate error messages
0: https://bugs.chromium.org/p/chromium/issues/detail?id=1087642
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
even if the options *could* be set in the frontend, the backend
actually has to do validation of those settings, thus we should not
make that a browser setting
additionally, having the value 'preferred' does not actually make sense,
since it does not add any security (the backend skips the
userverification check then)
This reverts commit aca4c2b5a9.
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
If the usage of a datastore did not change, we did not
return an estimate. The ui interpreted this as 'not enough data', but
it should actually be 'never'.
Fixing this by always setting the estimate first to 0 and overwriting
if we successfully calculated one, and checking for 'undefined' in the ui.
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
since the status api call blocks the drive, it only makes sense to do
when the drive is idle.
so do not reload on activate, but when the drive changes the first
time from busy to idle
also disable the reload button when the drive is busy
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
For tapes with many snapshots/group, a simple list of them is too
big. Instead, add a level for just the groups, this makes searching
for a specific backup much easier.
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
since reload is an async function, the view can be destroyed during
any 'await' point. Subsequent accesses to the view will fail, and we
will land in the catch. Check there if the view is destroyed, and
do not raise an error with the user then
also cancel any outstanding timer on 'deactivate' and 'destroy'
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
because we now select it directly in the left-hand tree
so we have to adapt the changer to the one set by the router
and not by the drop down field
and remove it from the TapeManagement tabpanel
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Dominik Csapak
Thomas Lamprecht
Wolfgang Bumiller
Stefan Reiter
Dietmar Maurer
Oguz Bektas