into the regular one (with default == MAX) and the one used for
pull/sync, where the default is 'None' which actually means the remote
end reduces the scope of sync automatically (or, if needed,
backwards-compat mode without any remote namespaces at all).
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
and use it when creating a sync job, and simplify the check on updating
(only check the final, resulting config instead of each intermediate
version).
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
Allow pulling all groups from a certain source namespace, and
possibly sub namespaces until max-depth, into a target namespace.
If any sub-namespaces get pulled, they will be mapped relatively from
the source parent namespace to the target parent namespace.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
we do not have normal GET variables available in the checks provided
by the rest server from the api macro, so do it manually.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
this is the most common sequence of checks we have in this file, so
let's have a single place where we implement it.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
these happen together very often.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
else this could leak existence of datastore.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
the helper now takes both high-privilege and lesser-privilege privs, so
the resulting bool can be used to quickly check whether additional
checks like group ownership are needed or not.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
We decided to go this route because it'll most likely be
safer in the API as we need to explicitly add namespaces
support to the various API endpoints this way.
For example, 'pull' should have 2 namespaces: local and
remote, and the GroupFilter (which would otherwise contain
exactly *one* namespace parameter) needs to be applied for
both sides (to decide what to pull from the remote, and what
to *remove* locally as cleanup).
The *datastore* types still contain the namespace and have a
`.backup_ns()` getter.
Note that the datastore's `Display` implementations are no
longer safe to use as a deserializable string.
Additionally, some datastore based methods now have been
exposed via the BackupGroup/BackupDir types to avoid a
"round trip" in code.
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
We probably can combine the base permission + owner check, but for
now add explicit ones to upfront so that the change is simpler as
only one thing is done.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
allow to list any namespace with privileges on it and allow to create
and delete namespaces if the user has modify permissions on the parent
namespace.
Creation is only allowed if the parent NS already exists.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
these are the ones for non-#[api] methods, also fill in the
namespace in prune operations
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Make it easier by adding an helper accepting either group or
directory
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
used_datastores returned the 'target', but in the full_restore_worker,
we interpreted it as the source and searched for a mapping
(which we then locked)
since we cannot return a HashSet of Arc<T> (missing Hash trait on DataStore),
we have now a map of source -> target
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
thanks to commit 70142e607dda43fc778f39d52dc7bb3bba088cd3 from
proxmox repos's proxmox-http crate
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Returning the GC status was dropped by mistake in commit 762f7d15
("datastore status: factor out api type DataStoreStatusListItem")
As this is considered a breaking change which we also felt, due to
the gc-status being used in the web interface for the datastore
overview list (not the dashboard), re add it.
Fixes: 762f7d15
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
[ T: add reference to breaking commit, reword message ]
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
And drop the base_path parameter on a first bunch of
functions (more reordering will follow).
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
like for the index, instead of manually stripping it.
this (and the previous change) is backwards-compatible since `Remote`
already skipped serializing empty strings, so the returned JSON is
identical.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
And use the api-types for their contents.
These are supposed to be instances for a datastore, the pure
specifications are the ones in pbs_api_types which should be
preferred in crates like clients which do not need to deal
with the datastore directly.
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
datastore's group_path will be moved to BackupDir soon and
this is required to be able to properly distinguish them
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
The type is a real enum.
All are API types and implement Display and FromStr. The
ordering is the same as it is in pbs-datastore.
Also, they are now flattened into a few structs instead of
being copied manually.
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Avoid collecting the whole group list in memory only to iterate and
filter over it again.
Note that the change could result in a indentation change, so best
viewed with `-w` flag.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
The restore_key api-endpoint is tape/drive/{drive}/restore-key.
Since I cannot set the url parameter for the drivename to null or
undefined, when restoring by exported-key, I moved the
added restore_key-api-code to
"create_key aka POST api2/json/config/tape-encryption-keys" and
added an ApiHandler call in the cli's "restore_key" to call
"create_key" in the api.
Signed-off-by: Markus Frank <m.frank@proxmox.com>
by using the newly added 'create_tar' and the 'ZstdEncoder'
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
namely /admin/datastore/{store}/snapshots
and /nodes/{node}/tasks
since those are api calls where the result can get quite large
with this change, the serialization is now streaming instead of making
a `Value` in memory.
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
`&Value` itself implements `Deserializer` and can therefore
be passed directly to `T::deserialize` without requiring an
intermediate `clone()`. (This also enables optionally
borrowing strings if the result has a short enough lifetime)
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
added a parameter to the cli for importing tape key via a json-parameter or
via reading a exported paperkey-file or json-file.
For this i also added a backupkey parameter to the api, but here it only
accepts json.
The cli interprets the parameter first as json-string, then json-file
and last as paperkey-file.
functionality:
proxmox-tape key paperkey [fingerprint of existing key] > paperkey.backup
proxmox-tape key restore --backupkey paperkey.backup # key from line above
proxmox-tape key restore --backupkey paperkey.json # only the json
proxmox-tape key restore --backupkey '{"kdf": {"Scrypt": ...' # json as string
for importing the key as paperkey-file it is irrelevant, if the paperkey got exported as html
or txt.
Signed-off-by: Markus Frank <m.frank@proxmox.com>
add support for multi-line comments to node.cfg and the api, similar to
how pve handles multi-line comments
Signed-off-by: Stefan Sterz <s.sterz@proxmox.com>
Acked-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
the latest changes to this api call changed/removed some things that
were actually necessary for the gui. Readd those and document them this
time.
The change from u64 to i64 limits us to 8EiB of Datastore sizes (instead if
16EiB) but if we reach that, we must adapt most other parts to use 128bit
sizes anyway
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
the api should return a 404 error for entries that do not exist
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
when using the 'extjs' formatter, it marks them in a way, so that
the gui can mark the form fields with the error
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
currently, we sort chunks by inode when verifying or backing up to tape.
we get the inode# by stat'ing each chunk, which may be more expensive
than the gains of reading the chunks in order
Since that is highly dependent on the underlying storage of the datastore,
introduce a tuning option so that the admin can tune that behaviour
for each datastore.
The default stays the same (sorting by inode)
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
When force is used, the current passphrase is not required. Instead
it will be read from the file pointed to by TAPE_KEYS_FILENAME and
the old key configuration will be overwritten using the new
passphrase. Requires super user privileges.
Signed-off-by: Stefan Sterz <s.sterz@proxmox.com>
some operations (e.g. garbage collection/restore/etc.) are very read
intensive on the chunks, and having atime=on and relatime=off (zfs default)
makes those write intensive operations too. Additionally, 'ext4' defaults to
relatime, so also change the default for api-created zpools.
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
- imported pbs-api-types/src/common_regex.rs from old proxmox crate
- use hex crate to generate/parse hex digest
- remove all reference to proxmox crate (use proxmox-sys and
proxmox-serde instead)
Signed-off-by: Dietmar Maurer <dietmar@proxmox.com>
commit c42a54795d introcuded a bug by
using fp.to_string(). Replace this with fp.signature() which correctly
returns the full fingerprint instead of the short version.
Signed-off-by: Dietmar Maurer <dietmar@proxmox.com>
with current proxmox-tfa this became a hard error, since origin and rp
are not both Strings anymore..
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
