and add Session::from_decoder() in order to be able to create a fuse session
with a `Decoder` given as argument.
Signed-off-by: Christian Ebner <c.ebner@proxmox.com>
This patch introduces `Context` to hold the decoder, ino_offset and caches for
the attributes and the goodbye table.
By caching, certain callbacks can be handled without the need to read additional
data via the decoder, which improves performance.
The searching of the goodbye table is refactored as well, avoiding recursive
function calls in case of a hash collision.
Signed-off-by: Christian Ebner <c.ebner@proxmox.com>
The hash of the filename in the goodbye table items allows to quickly compare to
a hashed filename.
Unfortunately, a matching hash is no garantee for matching filenames as hash
collisions are possible.
This patch fixes such possible collisions by further checking the filenames once
a matching hash has been found.
This introduces no significant extra cost (except for the filename comparison)
for cases with matching hashes, as the lookup call has to seek and read the file
attributes (including the filename) anyway.
In cases with hash collision, the next matching item is read and treaded
analogously (what means we need at least one extra seek).
As collisions should be not that frequent, this should be an acceptable penalty.
Signed-off-by: Christian Ebner <c.ebner@proxmox.com>
The functionality of stat is split into smaller sub-functions, which allows
to reuse them more flexible, as the code flow is similar but not always the same.
By this, the ugly and incorrect re-setting of the i-node in the lookup callback
function is avoided.
The correct i-node is now calculated beforehand and stat simply creates a
`libc::stat` struct from the provided parameters.
Also, this fixes incorrect i-node assignments in the readdir callback function.
Signed-off-by: Christian Ebner <c.ebner@proxmox.com>
The lookup call checks if the given filename is found in the directory referenced
by the i-node by calclulating the filenames hash and looking it up in the
directories goodbye table.
If found, the entries parameters are returned.
In order to be able to lookup the parent offset by a given file offset in the
readdir callback, this also stores the corresponding values in a HashMap.
Signed-off-by: Christian Ebner <c.ebner@proxmox.com>
In order to read the contents of the goodbye table while keeping the
functionality of list_dir in place as is.
Signed-off-by: Christian Ebner <c.ebner@proxmox.com>
... and thereby allow it to read a single directory entry based on the
start and end archive offsets.
Signed-off-by: Christian Ebner <c.ebner@proxmox.com>
... as they are not needed with the latest iteration of the fuse callback
function impl (which never made it into the repos).
Signed-off-by: Christian Ebner <c.ebner@proxmox.com>
The previous implementation simply skipped over `size` bytes, which is not
correct as size includes also the header.
By relying on `SequentailDecoder`s read_filename function, this is correctly
taken care of plus some more integrity checks.
Signed-off-by: Christian Ebner <c.ebner@proxmox.com>
Also, removes an unused println statement in the decoder callback function and
fixes a typo.
Further, use ABI compatible Option<&T> for FFI to avoid use of raw pointers.
Signed-off-by: Christian Ebner <c.ebner@proxmox.com>
Implements functions attributes, open, read, read_link and get_dir
to be used by the fuse implementation which uses file offsets within the archive
as inodes to reference the archives items.
Signed-off-by: Christian Ebner <c.ebner@proxmox.com>
By this it is possible to read and check just the first u64 of the corresponding
structs in order to identify the items.
This is needed for the fuse implementation in order to get entries based on the
archive offset, used as inode.
Directories are referenced by the offset to the goodbye tail while other items
are referenced by the offset of the filename followed by the entry.
Signed-off-by: Christian Ebner <c.ebner@proxmox.com>
... and use std::mem::MaybeUninit or proxmox::tools::vec::uninitialized() instead.
Signed-off-by: Christian Ebner <c.ebner@proxmox.com>
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
By taking ownership it is easier to move the decoder into another struct,
e.g. into a session context in fuse.
Signed-off-by: Christian Ebner <c.ebner@proxmox.com>
This adds the basic code in order to create a fuse session and mount an archive.
It adds libfuse3-3 as runtime dependency and libfuse3-dev as build dependency.
Signed-off-by: Christian Ebner <c.ebner@proxmox.com>
The flag CA_FORMAT_SHA512_256 is used to switch between sha512 and sha256 to
calculate digest in casync.
As we use sha256, we can get rid of this flag for now.
Signed-off-by: Christian Ebner <c.ebner@proxmox.com>
The original name PxarExcludePattern makes no sense anymore as the patterns are
also used to match filenames during restore of the archive.
Therefore, exclude_pattern.rs is moved to match_pattern.rs and PxarExcludePattern
rename to MatchPattern.
Further, since it makes more sense the MatchTypes are now declared as None,
Positive, Negative, PartialPositive or PartialNegative, as this makes more sense
and seems more readable.
Positive matches are those without '!' prefix, Negatives with '!' prefix.
This makes also the filename matching in the encoder/decoder more intuitive and
the logic was adapted accordingly.
Signed-off-by: Christian Ebner <c.ebner@proxmox.com>
Partial extraction of an archive with a glob pattern, e.g. '**/*.conf' lead to
the unexpected behaviour of restoring all partially matched directories (in this
example all of them).
This patch fixes this unexpected behaviour by only restoring those directories
were the directory or one of its sub-items fully matched the pattern and should
therefore be restored.
To achive this behavoiur, directory metadata is pushed onto a stack and restored
on demand.
Signed-off-by: Christian Ebner <c.ebner@proxmox.com>
In order to restore only directories when some of their content fully matched
a match pattern on partial restores, these directories and their metadata are
pushed onto this buffer and only restored successivley on demand.
Signed-off-by: Christian Ebner <c.ebner@proxmox.com>
This structure contains all the attributes allowing to easily store those within
a e.g. dir buffer.
Signed-off-by: Christian Ebner <c.ebner@proxmox.com>
By borrowing these objects we preserve the functionality but make sure
that ownership doesn't change, avoiding problems when contained within other
structs such as e.g. a buffer storing these attributes.
Signed-off-by: Christian Ebner <c.ebner@proxmox.com>
By default, restoring an archive will fail if files with the same filename
already exist in the target directory.
By setting the allow_existing_dirs flag, the restore will not fail if an
existing directory is encountered.
The metadata (permissions, acls, ...) of the existing directory will be set
to the ones from the archive.
Signed-off-by: Christian Ebner <c.ebner@proxmox.com>
Allows to partially restore an archive by passing match patterns to the restore
function.
The whole restore is performed in sequential, therefore the whole archive has to
be read.
By wrapping the RawFd into an Option it can be controlled if the corresponding
part is restored (in case of Some(fd)) or if the Reader reads over it
without restore (in case of None).
Signed-off-by: Christian Ebner <c.ebner@proxmox.com>
match_exclude_pattern() does not need a '&mut self' reference to the encoder,
move it therefore out of the impl.
Further, this patch contains some naming and formatting cosmetics.
Signed-off-by: Christian Ebner <c.ebner@proxmox.com>
dir_count was used to track the number of directory entries to store in the
archive and bail if the maximum is exceeded.
As the number of entries is equally obtained from the list of the filenames to
include, use that one instead.
Signed-off-by: Christian Ebner <c.ebner@proxmox.com>
Partial matches make only sense for directories, files are always leafs of the
tree. Take this into account in order to avoid restoring of files which only
matched the front of a match pattern.
Signed-off-by: Christian Ebner <c.ebner@proxmox.com>
This splits the functionality of restore_sequential() into several smaller
functions in order to allow to reuse them when restoring by seeking based on
the goodbye table offsets.
Signed-off-by: Christian Ebner <c.ebner@proxmox.com>
Commit cd7dc87903 introduced the special treatment
for .pxarexclude files when stored in the archive.
The incorrect placement of a code snipplet from this path leads to an incorrect
offset and size stored in the goodbye table.
This fix places the start to the correct position, restoring the previously
correct behaviour.
Signed-off-by: Christian Ebner <c.ebner@proxmox.com>
.pxarexclude files allow to exclude or include parts of a subtree by matching
with a glob pattern. The globs are used according to the matches of fnmatch.
In addition '**' can be used to match multiple directories within the path.
Order of the entries matter, as later ones win over previous ones.
As the .pxarexclude files can be placed at any node of the directory hirarchy,
this implies that matching child entries win over parent entries.
The only exception to this behaviour is, when a parent entry already fully
matched the path, thereby excluding the child entries which would match
otherwise.
Signed-off-by: Christian Ebner <c.ebner@proxmox.com>
Not all filesystems support features such as xattrs,acl,... and trying to get
them is rather expensive.
By getting the supported features based on the filesystem magic and masking the
user set feature flags, unsupported features are excluded rather inexpensively
while encoding the archive.
Signed-off-by: Christian Ebner <c.ebner@proxmox.com>
Reading the quota project id relies on a ioctl call to get fsxattr.
On FUSE filesystems, ioctl calls might not be supported and will fail with
an errno indicating no support.
For these cases, the error is ignored and the default project id is used
(indicated by returning Ok(None)).
Signed-off-by: Christian Ebner <c.ebner@proxmox.com>
Allows to store/dump/restore the quota project id associated with an inode in
order to correctly restore project quotas.
The project id is obtained/set via ioctl calls getting/setting the fsxattr
associated with the given file descriptor.
Signed-off-by: Christian Ebner <c.ebner@proxmox.com>
