by adding the 'default' serde hint and renaming 'recursion_depth' to
'max_depth' (to be in line with sync job config)
also add the logic to actually add/update the tape backup job config
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
by adding a new parameter 'namespaces', which contains a mapping
for a namespace like this:
store=datastore,source=foo,target=bar,max-depth=2
if source or target are omitted the root namespace is used for its value
this mapping can be given several times (on the cli) or as an array (via
api) to have mappings for multiple datastores
if a specific snapshot list is given simultaneously, the given snapshots
will be restored according to this mapping, or to the source namespace
if no mapping was found.
to do this, we reutilize the restore_list_worker, but change it so that
it does not hold a lock for the duration of the restore, but fails
if the snapshot does exist at the end. also the snapshot will now
be temporarily restored into the target datastore into the
'.tmp/<media-set-uuid>' folder.
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
these are helpers for the few cases where we want to print and parse
from a format that has the namespace and snapshot combined, like for
the on-tape catalog and snapshot archive.
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
into the regular one (with default == MAX) and the one used for
pull/sync, where the default is 'None' which actually means the remote
end reduces the scope of sync automatically (or, if needed,
backwards-compat mode without any remote namespaces at all).
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
and use it when creating a sync job, and simplify the check on updating
(only check the final, resulting config instead of each intermediate
version).
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
We sometimes need to do some in-memory only stuff, e.g., to check if
GC is already running for a datastore, which is a try_lock on a mutex
that is in-memory.
Actually the whole thing would be nicer if we could guarantee to hold
the correct contract statically, e.g., like
https://docs.rust-embedded.org/book/static-guarantees/design-contracts.html
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Allow pulling all groups from a certain source namespace, and
possibly sub namespaces until max-depth, into a target namespace.
If any sub-namespaces get pulled, they will be mapped relatively from
the source parent namespace to the target parent namespace.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
to use slice::strip_prefix() from std
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
helpful for places where namespaces need to be (re)created
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
We decided to go this route because it'll most likely be
safer in the API as we need to explicitly add namespaces
support to the various API endpoints this way.
For example, 'pull' should have 2 namespaces: local and
remote, and the GroupFilter (which would otherwise contain
exactly *one* namespace parameter) needs to be applied for
both sides (to decide what to pull from the remote, and what
to *remove* locally as cleanup).
The *datastore* types still contain the namespace and have a
`.backup_ns()` getter.
Note that the datastore's `Display` implementations are no
longer safe to use as a deserializable string.
Additionally, some datastore based methods now have been
exposed via the BackupGroup/BackupDir types to avoid a
"round trip" in code.
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
allow to list any namespace with privileges on it and allow to create
and delete namespaces if the user has modify permissions on the parent
namespace.
Creation is only allowed if the parent NS already exists.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
[ T: renamed from NAMESPACE_RECURSION_DEPTH_SCHEMA & moved to from
jobs to datastore ]
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
given a namespace, a source prefix and a target prefix this helper
strips the source prefix and replaces it with the target one (erroring
out if the prefix doesn't match).
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Make it easier by adding an helper accepting either group or
directory
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
The idea is to have namespaces in a datastore to allow grouping and
namespacing backups from different (but similar trusted) sources,
e.g., different PVE clusters, geo sites, use-cases or company
service-branches, without separating the underlying
deduplication domain and thus blowing up data and (GC/verify)
resource usage.
To avoid namespace ID clashes with anything existing or future
usecases use a intermediate `ns` level on *each* depth.
The current implementation treats that as internal and thus hides
that fact from the API, iow., the namespace path the users passes
along or gets returned won't include the `ns` level, they do not
matter there at all.
The max-depth of 8 is chosen with the following in mind:
- assume that end-users already are in a deeper level of a hierarchy,
most often they'll start at level one or two, as the higher ones
are used by the seller/admin to namespace different users/groups,
so lower than four would be very limiting for a lot of target use
cases
- all the more, a PBS could be used as huge second level archive in a
big company, so one could imagine a namespace structure like:
/<state>/<intra-state-location>/<datacenter>/<company-branch>/<workload-type>/<service-type>/
e.g.: /us/east-coast/dc12345/financial/report-storage/cassandra/
that's six levels that one can imagine for a reasonable use-case,
leave some room for the ones harder to imagine ;-)
- on the other hand, we do not want to allow unlimited levels as we
have request parameter limits and deep nesting can create other
issues as well (e.g., stack exhaustion), so doubling the minimum
level of 4 (1st point) we got room to breath even for the
more odd (or huge) use cases (2nd point)
- a per-level length of 32 (-1 due to separator) is enough to use
telling names, making lives of users and admin simpler, but not
blowing up parameter total length with the max depth of 8
- 8 * 32 = 256 which is nice buffer size
Much thanks for Wolfgang for all the great work on the type
implementation and assisting greatly with the design.
Co-authored-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
Co-authored-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Returning the GC status was dropped by mistake in commit 762f7d15
("datastore status: factor out api type DataStoreStatusListItem")
As this is considered a breaking change which we also felt, due to
the gc-status being used in the web interface for the datastore
overview list (not the dashboard), re add it.
Fixes: 762f7d15
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
[ T: add reference to breaking commit, reword message ]
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
so our examples can more easily access a datastore without
going over a configuration & cache
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
let BackupGroup implement Hash
let BackupGroup and BackupDir be AsRef<BackupGroup>
let BackupDir be AsRef<BackupDir>
the pbs-datastore types will implement these AsRefs as well
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
The type is a real enum.
All are API types and implement Display and FromStr. The
ordering is the same as it is in pbs-datastore.
Also, they are now flattened into a few structs instead of
being copied manually.
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
add support for multi-line comments to node.cfg and the api, similar to
how pve handles multi-line comments
Signed-off-by: Stefan Sterz <s.sterz@proxmox.com>
Acked-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
the latest changes to this api call changed/removed some things that
were actually necessary for the gui. Readd those and document them this
time.
The change from u64 to i64 limits us to 8EiB of Datastore sizes (instead if
16EiB) but if we reach that, we must adapt most other parts to use 128bit
sizes anyway
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
