instead of just logging the error. this should never happen in practice
unless someone is messing with the keyfile, in which case, it's better
to abort.
update tests accordingly (wrong fingerprint should fail, no fingerprint
should get the expected one).
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
the RSA key and the encryption key itself are hard-coded to avoid
stalling the test runs because of lack of entropy, they have no special
significance otherwise.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
when restoring an encrypted key, the original one is obviously not
available to check the fingerprint with.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
this fixes the issue that on some filesystems, you cannot recursively
remove a directory when you hold a lock on a file inside (e.g. nfs/cifs)
it is not really backwards compatible (so during an upgrade, there
could be two daemons have the lock), but since the locking was
broken before (see previous patch) it should not really matter
(also it seems very unlikely that someone will trigger this)
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
'lock_manifest' returns a Result<File, Error> so we always got the result,
even when we did not get the lock, but we acted like we had.
bubble the locking error up
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
if no groups were found, the task log was very confusing as it
contained no real information why nothing was synced, e.g.:
Starting datastore sync job 'remote:datastore:local-datastore:s-79412799-e6ee'
Sync datastore 'local-datastore' from 'remote/datastore'
sync job 'remote:datastore:local-datastore:s-79412799-e6ee' end
TASK OK
this patch simply logs how many groups were found and are about to be synced:
Starting datastore sync job 'remote:datastore:local-datastore:s-79412799-e6ee'
Sync datastore 'local-datastore' from 'remote/datastore'
found 0 groups to sync
sync job 'remote:datastore:local-datastore:s-79412799-e6ee' end
TASK OK
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
percentage of verified groups, interpolating based on snapshot count
within the group. in most cases, this will also be closer to 'real'
progress since added snapshots (those which will be verified) in active
backup groups will be roughly evenly distributed, while number of total
snapshots per group will be heavily skewed towards those groups which
have existed the longest, even though most of those old snapshots will
only be re-verified very infrequently.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
BackupInfo::list_backup_groups is identical code-wise, and makes more
sense as entry point for listing groups.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
WalkDir does not follow symlinks by default anyway, and this behaviour
is not documented anywhere. e.g., if a sysadmin mounts 'extra storage'
for some backup group or type (not knowing that only metadata is stored
in those directories), GC will ignore all the indices contained within
and happily garbage collect their chunks..
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
for safety reason, GC finds and marks all index files below the
datastore base path. as a result of regular operations, only index files
within the expected scheme of <TYPE>/<ID>/<TIMESTAMP> should exist.
add a small check + warning if the index list contains index files out
side of this expected scheme, so that an admin with shell access can
investigate.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
we have messages starting the phases anyway, and limit the number of
progress updates so that context remains available at all times.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
before adding more fields to the tuple, let's just create the struct
inside the match arms to improve readability.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
and use this information to add more information to client backup log
and guide the download manifest decision.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
the errors Vec can contain failed groups as well (e.g., if a group has
no or an invalid owner).
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
else users have to manually search through a potentially very long task
log to find the entries that are different.. this is the same summary
printed at the end of a manual verify task.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
from formatting functions to main function, and pass along the key data
lines instead of the full string.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
this is stricter than the check that happened on manifest load, as it
also fails if the manifest is signed but we don't have a key available.
add some additional output at the start of a backup to indicate whether
a previous manifest is available to base the backup on.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
otherwise loading will run into the signature mismatch which is
technically true, but not the complete picture in this case.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
if the manifest is signed/the contained archives/blobs are encrypted.
stored in 'unprotected' area, since there is already a strong binding
between key and manifest via the signature, and this avoids breaking
backwards compatibility for a simple usability improvement.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
and set/generate it on
- key creation
- key passphrase change
- key decryption if not already set
- key encryption with master key
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
since we systemd-encode parts of the upid string, and those can contain
characters that are invalid in urls (e.g. '\'), we have to percent encode
those
add a 'percent_encode_component' helper, so that we can maybe change
the AsciiSet for all uses at the same time
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Simplify the phase 2 code by treating .bad files just like regular
chunks, with the exception of stat logging.
To facilitate, we need to touch .bad files in phase 1. We only do this
under the condition that 1) the original chunk is missing (as before),
and 2) the original chunk is still referenced somewhere (since the code
lives in the error handler for a failed chunk touch, it only gets called
for chunks we expect to be there, i.e. ones that are referenced).
Untouched they will then be cleaned up after 24 hours (or after the last
longer-running task finishes).
Reason 2) is also a fix for .bad files not being cleaned up at all if
the original is no longer referenced anywhere (e.g. a user deleting all
snapshots after seeing some corrupt chunks appear).
cond_touch_path is introduced to touch arbitrary paths in the chunk
store with the same logic as touching chunks.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
unprivileged users should only see the counts related to their part of
the datastore.
while we're at it, switch to a list groups, filter groups, count
snapshots approach (like list_snapshots) to speedup calls to this
endpoint when many unprivileged users share a datastore.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
used in the PBS GUI, but also for PVE usage queries which don't need all
the extra expensive information..
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
by listing groups first, then filtering, then listing group snapshots.
this cuts down the number of openat/getdirents calls for users that just
have a partial view of the datastore.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
Useful to avoid the need for a long (and possibly changing) list of include-dev
options in certain situations, e.g. nested ZFS file systems. The option is
already implemented and seems to work as expected. The checks for virtual
filesystems are not affected by this option.
Signed-off-by: Fabian Ebner <f.ebner@proxmox.com>
The patterns from the archive root's .pxarexclude file are already present in
self.patterns when encode_pxarexclude_cli is called. Pass along the number of
CLI patterns and slice accordingly.
Suggested-By: Wolfgang Bumiller <w.bumiller@proxmox.com>
Signed-off-by: Fabian Ebner <f.ebner@proxmox.com>
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
previously a .pxarexclude entry in the root of the archive caused the file to
be generated as well, because the patterns are read before calling
generate_directory_file_list and within the function it wasn't possible to
distinguish between a pattern coming from the CLI and a pattern coming from
archive/root/.pxarexclude
Signed-off-by: Fabian Ebner <f.ebner@proxmox.com>
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
The documentation states:
.pxarexclude files are treated as regular files and will be included in the
backup archive.
Signed-off-by: Fabian Ebner <f.ebner@proxmox.com>
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
There is no leading slash in an entry's full_path, causing an anchored
exclude at the root level to fail, e.g. having "/name" as the content of the
file archive/root/.pxarexclude didn't match the file archive/root/name
Fix this by prepending a leading slash before matching.
Signed-off-by: Fabian Ebner <f.ebner@proxmox.com>
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
Add the versions command to proxmox-backup-manager with a similar output
to pveversion [-v]. It prints the packages line by line with only the
package name, followed by the version and, for proxmox-backup and
proxmox-backup-server, some additional information (running kernel,
running version).
In addition it supports the optional output-format parameter which can
be used to print the complete data in either json, json-pretty or text
format. If output-format is specified, the --verbose parameter is
ignored and the detailed list of packages is printed.
With the addition of the versions command, the report is extended as
well.
Signed-off-by: Mira Limbeck <m.limbeck@proxmox.com>
Add an optional string field to APTUpdateInfo which can be used for
extra information.
This is used for passing running kernel and running version information
in the versions API call together with proxmox-backup and
proxmox-backup-server.
Signed-off-by: Mira Limbeck <m.limbeck@proxmox.com>
for now this only does the 'postfix' -> 'postfix@-' conversion,
fixes the issue that we only showed the 'postfix' service syslog
(which is rather empty in a default setup) instead of the instance one
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
This patch prints the source of the encryption key when running
operations with proxmox-backup-client.
Signed-off-by: Stoiko Ivanov <s.ivanov@proxmox.com>
Currently if you generate a default encryption key:
`proxmox-backup-client key create --kdf none`
all backup operations which don't explicitly disable encryption will be
encrypted with this key.
I found it quite surprising, that my backups were all encrypted without
me explicitly specfying neither key nor encryption mode
This patch informs the user when the default key is used (and no
crypt-mode is provided explicitly)
Signed-off-by: Stoiko Ivanov <s.ivanov@proxmox.com>
when authenticating a token, and not just when authenticating a
user/ticket.
Reported-By: Dominik Jäger <d.jaeger@proxmox.com>
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
sd_notify is not synchronous, iow. it only waits until the message
reaches the queue not until it is processed by systemd
when the process that sent such a message exits before systemd could
process it, it cannot be associated to the correct pid
so in case of reloading, we send a message with 'MAINPID=<newpid>'
to signal that it will change. if now the old process exits before
systemd knows this, it will not accept the 'READY=1' message from the
child, since it rejects the MAINPID change
since there is no (AFAICS) library interface to check the unit status,
we use 'systemctl is-active <SERVICE_NAME>' to check the state until
it is not 'reloading' anymore.
on newer systemd versions, there is 'sd_notify_barrier' which would
allow us to wait for systemd to have all messages from the current
pid to be processed before acknowledging to the child, but on buster
the systemd version is to old...
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
log invalid owners to system log, and continue with next group just as
if permission checks fail for the following operations:
- verify store with limited permissions
- list store groups
- list store snapshots
all other call sites either handle it correctly already (sync/pull), or
operate on a single group/snapshot and can bubble up the error.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
for more useful log output
old:
Nov 10 11:50:51 foo pvestatd[3378]: proxmox-backup-client failed: Error: error trying to connect: tcp connect error: No route to host (os error 113)
new:
Nov 10 11:55:21 foo pvestatd[3378]: proxmox-backup-client failed: Error: error trying to connect: error connecting to https://thebackuphost:8007/ - tcp connect error: No route to host (os error 113)
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
similar to what we do for zfs. By bailing before partitioning, the disk is
still considered unused after a failed attempt.
Signed-off-by: Fabian Ebner <f.ebner@proxmox.com>
If a package is or will be installed from the enterprise repo, retrieve
the changelog from there as well (securely via HTTPS and authenticated
with the subcription key).
Extends the get_string method to take additional headers, in this case
used for 'Authorization'. Hyper does not have built-in basic auth
support AFAICT but it's simple enough to just build the header manually.
Take the opportunity and also set the User-Agent sensibly for GET
requests, just like for POST.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
to easily check the store of a worker_id
this fixes the issue that one could not filter by type 'syncjob' and
datastore simultaneously
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
very basic, based on API/concepts of PVE one.
Still missing, addint an extra_info string option to APTUpdateInfo
and pass along running kernel/PBS version there.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Clippy complains about the number of paramters we have for
create_archive and it really does need to be made somewhat
less awkward and more usable. For now we just log to stderr
as we previously did. Added todo-comments for this.
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
the basedir is already /usr/share/javascript/proxmox-backup/
so adding a subdir of that as alias is not needed
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
with remote Authids, not local Userids.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
if the user/token could have either configured/manually executed the
task, but it was either executed via the schedule (root@pam) or
another user/token.
without this change, semi-privileged users (that cannot read all tasks
globally, but are DatastoreAdmin) could schedule jobs, but not read
their logs once the schedule executes them. it also makes sense for
multiple such users to see eachothers manually executed jobs, as long as
the privilege level on the datastore (or remote/remote_store/local
store) itself is sufficient.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
since the store is not a path parameter, we need to do manual instead of
schema checks. also dropping Datastore.Backup here
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
to allow on-demand scanning of remote datastores accessible for the
configured remote user.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
instead of await'ing the result of 'create_service' directly,
poll it together with the shutdown_future
if we reached that, fork_restart the new daemon, and await
the open future from 'create_service'
this way the old process still handles open connections until they finish,
while we already start a new process that handles new incoming connections
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
they are not an error and we should retry the read
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
when a file shrunk during backup, we endlessly looped, reading/copying 0 bytes
we already have code that handles shrunk files, but we forgot to
break from the read loop
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
we have information here not available in the access log, especially
if the /api2/extjs formatter is used, which encapsulates errors in a
200 response.
So keep the auth log for now, but extend it use from create ticket
calls to all authentication failures for API calls, this ensures one
can also fail2ban tokens.
Do that logging in a central place, which makes it simple but means
that we do not have the user ID information available to include in
the log.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
add all of our configuration files in /etc/proxmox-backup/ further,
call some ZFS tool to get that status.
Also, use the subscription command form manager, as we often require
more info than the status. Also, adapt formatting a bit.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
those are not in a hot code path, and it is not really much work to
build them on the go..
It may not matther much, but it is unnecessary. Rust will probably
inline most of it anyway..
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
and change all users of the /status/tasks api call to this
with this change we can now delete the /status/tasks api call
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
instead of returning 0 elements (which does not really make sense anyway),
change it so that there is no limit anymore (besides usize::MAX)
this is technically a breaking change for the api, but i guess
no one is using limit=0 for anything sensible anyway
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
in the api we use PROXMOX_SAFE_ID_REGEX for backup ids, but here
(where we use it to list them) we use a local regex
since the first is a superset of the one used here, simply extend
the local one
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
should cover all the current scenarios. remote server-side checks can't
be meaningfully unit-tested, but they are simple enough so should
hopefully never break.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
in case the garbage_collection errors out, we never set the in-memory
state, so if it failed, the last 'good' starttime was considered
for the schedule
this could lead to the job running every minute instead of the
correct schedule
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
instead of manually, this has the advantage that we now set
the jobstate correctly and can return with an error if it is
currently running (instead of failing in the task)
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
index files that were smaller than their respective header size,
would fail with
"failed to fill whole buffer"
instead now check explicitely for the size and fail with
"index too small (size)"
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
try do reduce some unecessary lines, make match arms more precise so
one can faster see what's actually happening.
Also, avoid
> return Err(format_err!(...))
stuff, just use bail!()
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
re-use the future we already have for task log rotation to trigger
it.
Move the FileLogger in ApiConfig into an Arc, so that we can actually
update it and REST using the new one.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
so that we can easily get the main PID of the last recently launched
daemon. Will be used to get the control socket of that one for access
lgo rotate in a future patch
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
this is internal for now, use the comanndo socket struct
implementation, and ideally not a new one but the existing ones
created in the proxy and api daemons.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Allows to extend the use of that socket in the future, e.g., for log
rotate re-open signaling.
To reflect this we use a more general name, and change the commandos
to a more clear namespace.
Both are actually somewhat a breaking change, but the single real
world issue it should be able to cause is, that one won't be able to
stop task from older daemons, which still use the older abstract
socket name format.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
This is a preparatory step to replace the task control socket with it
and provide a "reopen log file" command for the rest server.
Kept it simple by disallowing to register new commands after the
socket gets spawned, this avoids the need for locking.
If we really need that we can always wrap it in a Arc<RWLock<..>> or
something like that, or even nicer, register at compile time.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
writing to a file can explode quite easily.
time formatting to rfc3339 should be more robust, but it has a few
conditions where it could fail, so catch that too (and only really
do it if required).
The writes to stdout are left as is, it normally is redirected to
journal which is in memory, and thus breaks later than most stuff,
and at that point we probably do not care anymore anyway.
It could make sense to actually return a result here..
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
We renamed the last one always to a file without compression
extension, even if it was .zst previously. So always add the correct
ending to the new last one, if compress was true.
Further, we cannot detect if there'd be a compression required if we
rotated (renamed) it already to the file with .zst included.
So check on rotation itself if it would be a "no .zst" -> ",zst"
transition, and call compress there.
it really should be OK now *knocking wood*
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
by requiring
- Datastore.Backup permission for target datastore
- Remote.Read permission for source remote/datastore
- Datastore.Prune if vanished snapshots should be removed
- Datastore.Modify if another user should own the freshly synced
snapshots
reading a sync job entry only requires knowing about both the source
remote and the target datastore.
note that this does not affect the Authid used to authenticate with the
remote, which of course also needs permissions to access the source
datastore.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
instead of hard-coding 'backup@pam'. this allows a bit more flexibility
(e.g., syncing to a datastore that can directly be used as restore
source) without overly complicating things.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
no idea why I added it as "delete", for all other such operations we
use the "remove" sub-command...
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
again, base idea copied off PVE, but, we safe the information about
which pending version we send a mail out already in a separate
object, to keep the api return type APTUpdateInfo clean.
This also makes a few things a bit easier, as we can update the
package status without saving/restoring the notify information.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
apt changes some of its state/cache also if it errors out, most of
the time, so we actually want to print both, stderr and stdout.
Further, only warn if its exit code is non-zero, for the same
rationale, it may bring updates available even if it errors (e.g.,
because a future pbs-enterprise repo is additionally configured but
not accessible).
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
it's not used anywhere, and not needed either until the day we might
implement push syncs.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
equivalent to verifying a whole datastore, except for reading job
(entries), which is accessible to regular Datastore.Audit/Backup users
as well.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
for verifying a whole datastore. Datastore.Backup now allows verifying
only backups owned by the triggering user.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
they are returned when reading the manifest, which just requires
Datastore.Audit as well. Datastore.Read is for reading backup contents,
not metadata.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
even for otherwise unprivileged users.
since effective privileges of an API token are always intersected with
those of their owning user, this does not allow an unprivileged user to
elevate their privileges in practice, but avoids the need to involve a
privileged user to deploy API tokens.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
a user should be allowed to read/list/overwrite backups owned by their
own tokens, but a token should not be able to read/list/overwrite
backups owned by their owning user.
when changing ownership of a backup group, a user should be able to
transfer ownership to/from their own tokens if the backup is owned by
them (or one of their tokens).
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
since it's not possible to extend existing structs, UserWithTokens
duplicates most of user::User.. to avoid duplicating user::ApiToken as
well, this returns full API token IDs, not just the token name part.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
in most generic places. this is accompanied by a change in
RpcEnvironment to purposefully break existing call sites.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
with an optional Tokenname, appended with '!' as delimiter in the string
representation like for PVE.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
Make it more clear that removed files are chunks (not indexes or
something like that, user cannot know that we do not touch them here)
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
fixes commit b4fb262335, which copied
over the "Removed bad files:" block, but only adapted the log text,
not the actual variable.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
instead of prerotating 1000 tasks
(which resulted in 2 writes each time an active worker was finished)
simply append finished tasks to the archive (which will be rotated)
page cache should be good enough so that we can get the task logs fast
since existing installations might have an 'index' file, we
still have to read tasks from there, but only if it exists
this simplifies the TaskListInfoIterator a good amount
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
by moving the properties of the storage status out again to the top
level object
also introduce proper structs for the types used, to get type-safety
and better documentation for the api calls
this changes the backup counts from an array of [groups,snapshots] to
an object/struct with { groups, snapshots } and include 'other' types
(though we do not have any at this moment)
this way it is better documented
this also adapts the ui code to cope with the api changes
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
saves files mtime as i64 instead of u64 which enables backup of
files with negative mtime
the catalog_decode_i64 is compatible to encoded u64 values (if < 2^63)
but not reverse, so all "old" catalogs can be read with the new
decoder, but catalogs that contain negative mtimes will decode wrongly
on older clients
also remove the arbitrary maximum value of 2^63 - 1 for
encode_u64 (we just use up to 10 bytes now) and correctly
decode them and update the comments accordingly
adds also test for i64 encode/decode and for compatibility between
u64 encode and i64 decode
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
fixes commit 16f9f244cf which extended
the return schema of the status API but did not adapted the client
status command to that.
Simply define our own tiny return schema and use that.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
we never actually compressed any files, since we only looked at
the extension:
* if it was 'zst' (which was always true for newly rotated files), we
would not compress it
* even if it was not 'zst', we compressed it inplace, never adding '.zst'
(possibly compressing them multiple times as zstd)
now we add new rotated files simply as '.X' and add a 'target' to the
compress fn, where we rename it to (but now we have to unlink the source
path)
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
commit a4915dfc2b made a wrong fix, as
it did not observed that the last expressions was done under the
invariant that we had a last verification result, because if none
could be loaded we already returned true (include).
It thus broke the case for "never re-verify", which is important when
using multiple schedules, a more high frequent one for new,
unverified snapshots, and a low frequency to re-verify older snapshots,
e.g., monthly.
Fix this case again, rework the code to avoid this easy to oversee
invariant. Use a nested match to better express the implication of
each setting, and add some comments.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
and load it again when opening it
this way we can persist the status of the last garbage collect across
daemon reloads and reboots
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
This is intended for when the server needs to do requests on
arbitrary, non PBS, external HTTP resources.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
we're a bit strict here what we accept, rather than changing that
lets do it like PVE/PMG and uppercase.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
This is indented to be used for the PVE storage library, replacing
the missuse of the much more expensive status API call.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
For proxmox packages it works the same way as PVE, by retrieving the
changelog URL and issuing a HTTP GET to it, forwarding the output to the
client. As this is only supposed to be a workaround removed in the
future, a simple block_on is used to avoid async.
For debian packages we can simply call 'apt-get changelog' and forward
it's output.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
As always, libapt is mocking us with complexity, but we can get the
approximate result we want by retrieving dependencies of all
to-be-updated packages and then seeing if they are missing.
If they are, we assume they will be installed.
For this, query_detailed_info is extended to allow reading details for
non-installed packages, and this is also exposed in
list_installed_apt_packages via 'all_versions_for'. This is necessary so
we can retrieve changelogs for such packages.
Note that we cannot retrieve all that information all the time, as
querying details for packages that aren't installed takes a rather long
time.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
Avoids custom hardcoded logic, but can only be used for debian packages
as of now. Adds a FIXME to switch over to use --print-uris only once our
package repos support that changelog format.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
To get package details for a specific version instead of only the
candidate.
Also cleanup filter function with extra struct instead of unnamed &str
parameters.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
...to avoid having the tools:: module depend on api2.
The get_string function is based directly on hyper and thus relatively
simple, not supporting redirects for example.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
Dietmar Maurer
Fabian Grünbichler
Wolfgang Bumiller
Dominik Csapak
Stefan Reiter
Fabian Ebner
Thomas Lamprecht
Mira Limbeck
Stoiko Ivanov
Oguz Bektas
Hannes Laimer