so that a user can remove a datastore from the gui,
though no data is deleted, this has to be done elsewhere (for now)
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
so that longer running creates (e.g. a slow storage), does not
run in a timeout and we can follow its creation
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Signed-off-by: Dietmar Maurer <dietmar@proxmox.com>
so that the update does not get canceled because of a bad datastore
hide the irrelevant fields in that case
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
this was previously set on the button class, but has since been removed
add it here to have the badge number centered again
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
by default the treelist gets the 'nav' ui, which in newer extjs
versions has a custom styling (unlike before)
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
by using beforedestroy instead of destroy (like we do everywhere else)
to avoid race condition when the controller has
already removed some handlers on destruction
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
using container here is fine, we do not need panel behaviour which
is more bloated. Removes two ARIA warnings.
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
looks (almost confusingly) empty else and no real disadvantage in
showing the disabled one until a media-set is selected and loaded
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
for that we need to split the prefilter additions, else
we always filter the snaphots too and giving 'undefined' filters
all snapshots...
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
for the case that the user selects only whole datastores, we do not
want to send and (exhaustive) list of snapshots that get restored,
but we only want to honor the mapping the user gives
this avoids using the backup restore codepath that iterates twice
over the tapes and would generally be slower for a lot of snapshots
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
when no uuid/mediaset is given.
we change a bit how we use the uuid by moving it into the viewmodel
(instead of a simple property on the view) so that we can always
use the selected one
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
to make it clear that this button is for restore and for
now we do not have any plans to add buttons here
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
normally, users will not have many tape media pools,
and are more interested in the actual media-sets, so
expand those nodes by default
if the list gets very long, the user can collapse some pools anyway
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Mainly as Config -> Option is a weird name, Authentication has only
one obj. grid, the node options are only the http-proxy for now and
that is a sort of authentication, so good enough for me for now, but
should be rethought for 2.0 and/or once more node opts are added
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
for now only http-proxy lives there, but we will add more options later,
such as
* email from
* default gui language
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
It was not actually bad, so they're quite opinionated to be honest,
but at least xtypes props must go first and variable declaration
should try to be as near as possible to the actual use as long as
code stays sensible readable/short.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
a restore does not change the tape content, so a reload has no benefit here.
since we're touching those lines, change to 'autoShow' property
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
by including the new snapshotselector. If a whole media-set is to be
restored, select all snapshots
to achieve this, we drop the 'restoreid' and 'datastores' properties
for the restore window, and replace them by a 'prefilter' object
(with 'store' and 'snapshot' properties)
to be able to show the snapshots, we now have to always load the
content of that media-set, so drop the short-circuit if we have
the datastores already.
change the layout of the restore window into a two-step window
so that the first tab is the selection what to restore, and on the
second tab the user chooses where to restore (drive, datastore, etc.)
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
* handle not rendered call of getErrors
* return 'all' as value if all snaphots where selected
(for better distinction)
* remove the default height
* add checkChange on stores filterChange
(now change also fires on the gridfilter plugin change)
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
enable scrolling by default, and handle the case that getErrors gets
called when the component is not yet rendered
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
this will be used for letting the user select multiple, individual
snapshots on restore (instead of having a single or the whole media-set)
if a 'prefilter' object is given, we filter the grid by those
values using the gridfilter plugins (like in pve's bulk action windows)
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
instead of having them in the toolbar. This makes the UI more consistent
with the datastore content view.
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
when changin the remote, there is a high chance that there are different
datastores, and if a user does not pay attention, now the first store
of the new remote is selected, instead of the one with the same name
disable autoSelect and let the user manually select a remote datastore
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
we have 2 modi in that window:
* backup has multiple datastores
* backup has single datastore
In the first case we show a 'mapping' grid so that
the user can only restore a part. Here a user sees all source
Datastores and can select a target for each one.
In the second case we only have a single 'Datastore' selector, but
we do not show the source. Because of this, the naming is slightly ambiguous
(is it the 'Source' or the 'Target' ?), so rename it to 'Target Datastore'.
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
by checking for definedness of the label (tapes without barcode
have the empty string as label-text) and falling back to the
source slot for the load action
Note: Changed the load-slot API from PUT to POST
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Signed-off-by: Dietmar Maurer <dietmar@proxmox.com>
when the user start an action where we know that it locks the drive,
reload the tape store, so that the state is refreshed
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
if a user has not configured a drive for a specified driveslot of the
changer, simply hide that slot
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
datastore and tape entries are very similar but differ in some points
in such a way that a nice unification is not really that helpful, but
making similar key parts the same is still nice when reading the code
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
by using format_boolean for compression/write protect,
combining file/block posiition into one (saves a line)
and adding the missing alert-flags
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
it is rather pointless to let the user select something were there
is no choice. We have to keep the window though, since the user may
want to choose a pool
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
if a changer only has a single drive, there is no point in showing
a window with a DriveSelector, just do want the user wanted.
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
to make it more like a 'dangerous' remove window
also works in the singleDrive logic to hide/show the driveselector
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
for some storages, it is valuable information, e.g. if one has datastores
on separate datasets of the same zpool
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
To let users find the good explanation about allocation and retention
policies from the docs easier.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
by adding a custom field (grid) where the user can select
a target datastore for each source datastore on tape
if we have not loaded the content of the media set yet,
we have to load it on window open to get the list of datastores
on the tape
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
since we can now backup multiple datastores in the same media-set,
we show the datastores as first level below that
the final tree structucture looks like this:
tapepool A
- media set 1
- datastore I
- tape x
- ct/100
- ct/100/2020-01-01T00:00:00Z
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
this is much handier than number field, and the user can instantly
see which one is an import/export slot
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
so that the tape backup can be restored as any user, given
the current logged in user has the correct permission.
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
from 2 to 60 seconds. To retain the response time of the gui
when adding/editing/removing, trigger a manual reload on these actions
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
iterating over a nodeinterfaces children while removing them
will lead to 'child' being undefined
instead collect the children to remove in a separate list
and iterate over them
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Less anti-aliasing to do, so it looks better when small.
Note, I use a mask as else we could not cut out something
transparent, but only over paint it filled with white, which is not
the same and not how font awesome does it.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
1. Use same height as width
2. drop the top/bottom "frame" lines
3. instead of two "bearings" side by side, like VHS or music-compact
tapes have, use a single bearing and an outer circle to denote the
magnetic tape edge
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
instead of silently discarding the error, else the user might be
confused because nothing happened
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
by adding the existing credential id to the 'excludeCredentials' list
this prevents the browser from registering a token twice, which
lets authentication fail on some browser/token combinations
(e.g. onlykey/solokey+chromium)
while is seems this is currently a bug in chromium, in a future spec
update the underlying behaviour should be better defined, making this
an authenticator bug
also explicitly catch registering errors and show appropriate error messages
0: https://bugs.chromium.org/p/chromium/issues/detail?id=1087642
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
even if the options *could* be set in the frontend, the backend
actually has to do validation of those settings, thus we should not
make that a browser setting
additionally, having the value 'preferred' does not actually make sense,
since it does not add any security (the backend skips the
userverification check then)
This reverts commit aca4c2b5a9.
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
If the usage of a datastore did not change, we did not
return an estimate. The ui interpreted this as 'not enough data', but
it should actually be 'never'.
Fixing this by always setting the estimate first to 0 and overwriting
if we successfully calculated one, and checking for 'undefined' in the ui.
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
since the status api call blocks the drive, it only makes sense to do
when the drive is idle.
so do not reload on activate, but when the drive changes the first
time from busy to idle
also disable the reload button when the drive is busy
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
For tapes with many snapshots/group, a simple list of them is too
big. Instead, add a level for just the groups, this makes searching
for a specific backup much easier.
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
since reload is an async function, the view can be destroyed during
any 'await' point. Subsequent accesses to the view will fail, and we
will land in the catch. Check there if the view is destroyed, and
do not raise an error with the user then
also cancel any outstanding timer on 'deactivate' and 'destroy'
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
because we now select it directly in the left-hand tree
so we have to adapt the changer to the one set by the router
and not by the drop down field
and remove it from the TapeManagement tabpanel
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
and only check TapeManagement once in the init function
we now have 2 updatestores that update individually
(one for datastores, one for drives/changers)
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
by generalizing the isDataStorePath logic to a 'parseRouterPath'.
We still have to keep the isDataStore logic for tabpanel handling,
If we add tabs to changer-/drivestatus panels, we have to adapt
that too.
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
the DiffStore only updates the fiels given in the model, so we have to
list all the fields we depend on, else we have incomplete data,
e.g. for rendering
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
if the drive state is not empty, some action blocks it, so we cannot
do any task anyway. Since we now refresh the state every 5 seconds,
we can disable/enable them 'live'.
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
some fido2/webauthn keys can have a pin, and the client can request
a mode for the user verification.
'default' (no value set), lets the browser/device decide if the user has to
enter the pin of the device
'discouraged' requests that the user should not need to enter the pin
'preferred' requests that the user should need to enter the pin (if possible)
since we use webauthn only as a 2nd factor, having the user enter
the device pin on login may seem too much hassle for some users, so
give them the option
since this is a client option anyway, do not save it in the backend, but
in the browser local storage
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
mostly copied from pve (for now; will refactor when i add it to
pmg too (soon)) without the pve specific features like dashboard
storages
contains some eslint fixes comparing to pves window
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
the statement !a === "somestring" cannot be true since
!a is either true or false and thus not a string
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
an optimize the columns for smaller layouts (1280 width)
we show either:
* Idle
* spinner + status (if no upid)
* spinner + rendered UPID (clickable, opens task viewer)
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
We do not use the media location, so there is no need to update
the online status in the list_media call. Besides, we already update
the online status when we query the changer/status.
slot is already in the title of the grid, and hide it by default for
drives (the user does not need it there)
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
but auto-expand them, so no additional click is necessary
this shows the user which tapes are involved for the media sets
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
if a catalog is missing (or the loading otherwise throws an error), show
the error message in a msg box instead of a mask. this way a user can
still navigate the tree
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
by adapting and reusing the 'LabelMedia' window
shows a short notice about inserting the correct tape in the drive
and now allows to select a drive
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
listing the media can potentially hang (changer status), so do not
reload in the background, only on activate
also increase the timeout to 5 minutes and add a reload button
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
since tape commands can take a while and we do not want to change
all of those to worker tasks, increase the timeout to 5 minutes
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
do not only show if labeled, but the whole status (full/writeable/etc.)
and to which pool the tape belongs (if any)
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
instead of showing the snapshots directly under the pool and then the
media-sets, list the media-sets under the pool and only after the
snapshots
this has several advantages:
* we only have to read one set of tape catalog data on expand and not all of
them everytime (which does not scale)
* we can show media-sets without snapshots, this can happen when we
inventoried a set of tapes from another pbs instance, or lost the
catalog data somehow
the disadvantage is that one has to go look for the media set where the
snapshot is included, but we can solve this by implementing a search
function in the future (in the backend)
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
s/availabel/available/g
no semantic change at all
Signed-off-by: Oguz Bektas <o.bektas@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
we include all tasks whose type start with 'verif' in the type 'verify'
but if we want to actually show them in the pop-up, we have to reverse
map this back to 'verif', else there are tasks missing from there
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
and fix some issues from referenced named the same as their heading
they anchor too.
This should be fixed for real in our python plugin to scan for such
references, its probably a bug there, but as most of the problematic
ones where wrong (missing chapter prefix) anyway changing them is OK
too.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Co-Authored-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Tested-by: Oguz Bektas <o.bektas@proxmox.com>
Signed-off-by: Oguz Bektas <o.bektas@proxmox.com>
since we do not show the tapes anymore in the BackupOverview, add
another panel where we can list the available tapes in the inventory
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
instead of grouping by tape (which is rarely interesting),
group by pool -> group -> id -> mediaset
this way a user looking for a backup of specific vm can do just that
we may want to have an additional view here were we list all snapshots
included in the selected media-set ?
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>