sd_notify is not synchronous, iow. it only waits until the message
reaches the queue not until it is processed by systemd
when the process that sent such a message exits before systemd could
process it, it cannot be associated to the correct pid
so in case of reloading, we send a message with 'MAINPID=<newpid>'
to signal that it will change. if now the old process exits before
systemd knows this, it will not accept the 'READY=1' message from the
child, since it rejects the MAINPID change
since there is no (AFAICS) library interface to check the unit status,
we use 'systemctl is-active <SERVICE_NAME>' to check the state until
it is not 'reloading' anymore.
on newer systemd versions, there is 'sd_notify_barrier' which would
allow us to wait for systemd to have all messages from the current
pid to be processed before acknowledging to the child, but on buster
the systemd version is to old...
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
the basedir is already /usr/share/javascript/proxmox-backup/
so adding a subdir of that as alias is not needed
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
with remote Authids, not local Userids.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
to allow on-demand scanning of remote datastores accessible for the
configured remote user.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
in case the garbage_collection errors out, we never set the in-memory
state, so if it failed, the last 'good' starttime was considered
for the schedule
this could lead to the job running every minute instead of the
correct schedule
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
re-use the future we already have for task log rotation to trigger
it.
Move the FileLogger in ApiConfig into an Arc, so that we can actually
update it and REST using the new one.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
so that we can easily get the main PID of the last recently launched
daemon. Will be used to get the control socket of that one for access
lgo rotate in a future patch
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Allows to extend the use of that socket in the future, e.g., for log
rotate re-open signaling.
To reflect this we use a more general name, and change the commandos
to a more clear namespace.
Both are actually somewhat a breaking change, but the single real
world issue it should be able to cause is, that one won't be able to
stop task from older daemons, which still use the older abstract
socket name format.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
no idea why I added it as "delete", for all other such operations we
use the "remove" sub-command...
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
in most generic places. this is accompanied by a change in
RpcEnvironment to purposefully break existing call sites.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
by moving the properties of the storage status out again to the top
level object
also introduce proper structs for the types used, to get type-safety
and better documentation for the api calls
this changes the backup counts from an array of [groups,snapshots] to
an object/struct with { groups, snapshots } and include 'other' types
(though we do not have any at this moment)
this way it is better documented
this also adapts the ui code to cope with the api changes
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
fixes commit 16f9f244cf which extended
the return schema of the status API but did not adapted the client
status command to that.
Simply define our own tiny return schema and use that.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
reuse the FileLogger module in append mode.
As it implements write, which is not thread safe (mutable self) and
we use it in a async context we need to serialize access using a
mutex.
Try to use the same format we do in pveproxy, namely the one which is
also used in apache or nginx by default.
Use the response extensions to pass up the userid, if we extract it
from a ticket.
The privileged and unprivileged dameons log both to the same file, to
have a unified view, and avoiding the need to handle more log files.
We avoid extra intra-process locking by reusing the fact that a write
smaller than PIPE_BUF (4k on linux) is atomic for files opened with
the 'O_APPEND' flag. For now the logged request path is not yet
guaranteed to be smaller than that, this will be improved in a future
patch.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
This adds a change-owner command to proxmox-backup-client,
that allows a caller with datastore modify privileges
to change the owner of a backup-group.
Signed-off-by: Dylan Whyte <d.whyte@proxmox.com>
To untangle the server code from the actual backup
implementation.
It would be ideal if the whole backup/ dir could become its
own crate with minimal dependencies, certainly without
depending on the actual api server. That would then also be
used more easily to create forensic tools for all the data
file types we have in the backup repositories.
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
A 'map' call will only clean up what it needs, that is only leftover
files or dangling instances of it's own name.
For a full cleanup the user can call 'unmap' without any arguments.
The 'cleanup on error' behaviour of map_loop is removed. It is no longer
needed (since the next call will clean up anyway), and in fact fixes a
bug where trying to map an image twice would result in an error, but
also cleanup the .pid file of the running instance, causing 'unmap' to
fail afterwards.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
So user doesn't need to remember which loop devices he has mapped to
what.
systemd unit encoding is used to transform a unique identifier for the
mapped image into a suitable name. The files created in /run/pbs-loopdev
will be named accordingly.
The encoding all happens outside fuse_loop.rs, so the fuse_loop module
does not need to care about encodings - it can always assume a name is a
valid filename.
'unmap' without parameter displays all current mappings. It's
autocompletion handler will list the names of all currently mapped
images for easy selection. Unmap by /dev/loopX or loopdev number is
maintained, as those can be distinguished from mapping names.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
Allows mapping fixed-index .img files (usually from VM backups) to be
mapped to a local loopback device.
The architecture uses a FUSE-backed temp file mapped to a loopdev:
/dev/loopX -> FUSE /run/pbs-loopdev/xxx -> backup client -> PBS
Since unmapping requires some cleanup (unmap the loopdev, stop FUSE,
remove the temp files) a special 'unmap' command is added, which uses a
PID file to send SIGINT to the backup-client instance started with
'map', which will handle the cleanup itself.
The polling with select! in mount.rs needs to be split in two, since we
have a chicken and egg problem between running FUSE and setting up the
loop device - so we need to do them concurrently, until the loopdev is
assigned, at which point we can report success and daemonize, and then
continue polling the FUSE loop future.
A loopdev module is added to tools containing all required functions for
mapping a loop device to the FUSE file, with the ioctls moved into an
inline module to avoid exposing them directly.
The client code is placed in the 'mount' module, which, while
admittedly a loose fit, allows reuse of the daemonizing code.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
this adds the ability to add port numbers in the backup repo spec
as well as remotes, so that user that are behind a
NAT/Firewall/Reverse proxy can still use it
also adds some explanation and examples to the docs to make it clearer
for h2 client i left the localhost:8007 part, since it is not
configurable where we bind to
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
this starts a task once a day at "00:00" that rotates the task log
archive if it is bigger than 500k
if we want, we can make the schedule/size limit/etc. configurable,
but for now it's ok to set fixed values for that
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
also changes:
* correct comment about reset (replace 'sync' with 'action')
* check schedule change correctly (only when it is actually changed)
with this changes, we can drop the 'lookup_last_worker' method
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
we rely on the jobstate handling to write the error of the worker
into its state file, but we used '?' here in a block which does not
return the error to the block, but to the function/closure instead
so if a prune job failed because of such an '?', we did not write
into the statefile and got a wrong state there
instead use our try_block! macro that wraps the code in a closure
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
like the sync jobs, so that if an admin configures a schedule it
really starts the next time that time is reached not immediately
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
- remove chrono dependency
- depend on proxmox 0.3.8
- remove epoch_now, epoch_now_u64 and epoch_now_f64
- remove tm_editor (moved to proxmox crate)
- use new helpers from proxmox 0.3.8
* epoch_i64 and epoch_f64
* parse_rfc3339
* epoch_to_rfc3339_utc
* strftime_local
- BackupDir changes:
* store epoch and rfc3339 string instead of DateTime
* backup_time_to_string now return a Result
* remove unnecessary TryFrom<(BackupGroup, i64)> for BackupDir
- DynamicIndexHeader: change ctime to i64
- FixedIndexHeader: change ctime to i64
since converting from i64 epoch timestamp to DateTime is not always
possible. previously, passing invalid backup-time from client to server
(or vice-versa) panicked the corresponding tokio task. now we get proper
error messages including the invalid timestamp.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
by either printing the original, out-of-range timestamp as-is, or
bailing with a proper error message instead of panicking.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
fixes the error, "manifest does not contain
file 'X.pxar'", that occurs when trying to mount
a pxar archive with 'proxmox-backup-client mount':
Signed-off-by: Dylan Whyte <d.whyte@proxmox.com>
by leaving the buffer sizes on default, we get much better tcp performance
for high latency links
throughput is still impacted by latency, but much less so when
leaving the sizes at default.
the disadvantage is slightly higher memory usage of the server
(details below)
my local benchmarks (proxmox-backup-client benchmark):
pbs client:
PVE Host
Epyc 7351P (16core/32thread)
64GB Memory
pbs server:
VM on Host
1 Socket, 4 Cores (Host CPU type)
4GB Memory
average of 3 runs, rounded to MB/s
| no delay | 1ms | 5ms | 10ms | 25ms |
without this patch | 230MB/s | 55MB/s | 13MB/s | 7MB/s | 3MB/s |
with this patch | 293MB/s | 293MB/s | 249MB/s | 241MB/s | 104MB/s |
memory usage (resident memory) of proxmox-backup-proxy:
| peak during benchmarks | after benchmarks |
without this patch | 144MB | 100MB |
with this patch | 145MB | 130MB |
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
we want to use dates for the calendarspec, and with that there are some
impossible combinations that cannot be detected during parsing
(e.g. some datetimes do not exist in some timezones, and the timezone
can change after setting the schedule)
so finding no timestamp is not an error anymore but a valid result
we omit logging in that case (since it is not an error anymore)
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Because if not, the backups it creates have bogus permissions and may
seem like they got broken once the daemon is started again with the
correct user/group.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
it really is not necessary, since the only time we are interested in
loading the state from the file is when we list it, and there
we use JobState::load directly to avoid the lock
we still need to create the file on syncjob creation though, so
that we have the correct time for the schedule
to do this we add a new create_state_file that overwrites it on creation
of a syncjob
for safety, we subtract 30 seconds from the in-memory state in case
the statefile is missing
since we call create_state_file from proxmox-backup-api,
we have to chown the lock file after creating to the backup user,
else the sync job scheduling cannot aquire the lock
also we remove the lock file on statefile removal
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
this is intended to be a generic helper to (de)serialize job states
(e.g., sync, verify, and so on)
writes a json file into '/var/lib/proxmox-backup/jobstates/TYPE-ID.json'
the api creates the directory with the correct permissions, like
the rrd directory
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
an encrypted Index should never reference a plain-text chunk, and an
unencrypted Index should never reference an encrypted chunk.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
When uploading an RSA encoded key alongside the backup,
the backup would fail with the error message: "wrong blob
file extension".
Adding the '.blob' extension to rsa-encrypted.key before the
the call to upload_blob_from_data(), rather than after, fixes
the issue.
Signed-off-by: Dylan Whyte <d.whyte@proxmox.com>
Errors while applying metadata will not be considered fatal
by default using `pxar extract` unless `--strict` was passed
in which case it'll bail out immediately.
It'll still return an error exit status if something had
failed along the way.
Note that most other errors will still cause it to bail out
(eg. errors creating files, or I/O errors while writing
the contents).
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
The extraction algorithm has a state (bool) indicating
whether we're currently in a positive or negative match
which has always been initialized to true at the beginning,
but when the user provides a `--pattern` argument we need to
start out with a negative match.
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
To prevent a race with a background GC operation, do not allow deletion
of backups who's index might currently be referenced as the "known chunk
list" for successive backups. Otherwise the GC could delete chunks it
thinks are no longer referenced, while at the same time telling the
client that it doesn't need to upload said chunks because they already
exist.
Additionally, prevent deletion of whole backup groups, if there are
snapshots contained that appear to be currently in-progress. This is
currently unlikely to trigger, as that function is only used for sync
jobs, but it's a useful safeguard either way.
Deleting a single snapshot has a 'force' parameter, which is necessary
to allow deleting incomplete snapshots on an aborted backup. Pruning
also sets force=true to avoid the check, since it calculates which
snapshots to keep on its own.
To avoid code duplication, the is_finished method is factored out.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
instead of exposing handlebars itself, offer a register_template and
a render_template ourselves.
render_template checks if the template file was modified since
the last render and reloads it when necessary
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
I mean the user expects that we know what archives, fidx or didx, are
in a backup, so this is internal info and should not be logged by
default
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
This is a more convenient way to pass along the key when
creating encrypted backups of unprivileged containers in PVE
where the unprivileged user namespace cannot access
`/etc/pve/priv`.
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
Have a single common function to get the BaseDirectories
instance and a wrapper for `find()` and `place()` which
wrap the error with some context.
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
place() is used when creating a file, as it will create
intermediate directories, only use it when actually placing
a new file.
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
This also replaces the recently introduced --encryption
parameter on the client with a --crypt-mode parameter.
This can be "none", "encrypt" or "sign-only".
Note that this introduces various changes in the API types
which previously did not take the above distinction into
account properly:
Both `BackupContent` and the manifest's `FileInfo`:
lose `encryption: Option<bool>`
gain `crypt_mode: Option<CryptMode>`
Within the backup manifest itself, the "crypt-mode" property
will always be set.
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
This can be used to explicitly disable encryption even if a
default key file exists in ~/.config.
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
we want to save if a file of a backup is encrypted, so that we can
* show that info on the gui
* can later decide if we need to decrypt the backup
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
These aren't installed and are only used for manual testing,
so there's no reason to force them to be built all the time.
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
The download methods used to take the destination by value
and return them again, since this was required when using
combinators before we had `async fn`.
But this is just an ugly left-over now.
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
else we start a dynamic writer and never close it, leading to a backup error
this fixes an issue with backing up vm templates
(and possibly vms without disks)
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
This used to be default-off and was accidentally set to
on-by-default with the pxar crate update.
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
disk_usage returned the same values as defined in StorageStatus,
so simply use that
with that we can replace the logic of the datastore status with that
function and also use it for root disk usage of the nodes
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
If one executes a client command like
# proxmox-backup-client files <snapshot> --repository ...
the files shown have already the '.fidx' or '.blob' file ending, so
if a user would just copy paste that one the client would always add
.blob, and the server would not find that file.
So avoid adding file endings if it is already a known OK one.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
will be extended in a next patch.
Also drop a dead else branch, can never get hit as we always add
.blob as fallback
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
'sync' is used for manually pulling a remote datastore
changing it for a scheduled sync to 'syncjob' so that we can
differentiate between both types of syncs
this also adds a seperate task description for it
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
since the target side wants this to be a boolean and
serde interprets a None Value as 'null' we have to only
add this when it is really set via cli
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
using a handlebars instance in ApiConfig, to cache the templates
as long as possible, this is currently ok, as the index template
can only change when the whole package changes
if we split this in the future, we have to trigger a reload of
the daemon on gui package upgrade (so that the template gets reloaded)
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Dominik Csapak
Wolfgang Bumiller
Thomas Lamprecht
Fabian Grünbichler
Dietmar Maurer
Hannes Laimer
Dylan Whyte
Stefan Reiter
Stoiko Ivanov
Christian Ebner