instead of having the grid be as tall as possible and the containing
panel scroll. limit the grids height to the panel size and scroll the
grid.
this has two advantages:
* if a user has many slots, it is now possible to to navigate the other
grids to the position wanted
* having the grids scroll, means it can use extjs' buffered renderer,
which makes the view much more responsive (in case of hundreds of
slots)
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
a single catalog can be over 100MiB, and a media-set can have multiple
catalogs to read (no technical upper limit). On slow disks, this can
take much longer than 30 seconds (the default timeout).
The real solution would be to have some kind of index only for the gui
relevant part, e.g. a table in the beginning of the catalog, or
alternatively a seperate file with that info. Until we have such a
solution increase the timeout as a stopgap.
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
While it would be nice to be able to resize that window for more
snapshots/datastores in view, this would need quite some reworking on the
input panel side. So for now, disable resizing of that window, otherwise
the grids look weird as they only scale horizontally but not vertically.
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
The api2 one passes the whole response (for more flexibility) on
reject, so we need to adapt to that.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
since extjs 7.0 those will get picked up by our query logic and
sent to the backend. prevent that by setting isFormField to false
(we assemble the values differently)
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
if we want the empty value as a valid default value in a combogrid,
we have to explicitely select 'null' else the field will be marked as
dirty
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Reported-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
in case an invalid drive was configured, now it marks the field
invalid instead of autoselecting the first valid one
this could have lead to users configuring the wrong drive in a
tape-backup-job when they edited one
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Reported-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
by using beforedestroy instead of destroy (like we do everywhere else)
to avoid race condition when the controller has
already removed some handlers on destruction
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
looks (almost confusingly) empty else and no real disadvantage in
showing the disabled one until a media-set is selected and loaded
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
for that we need to split the prefilter additions, else
we always filter the snaphots too and giving 'undefined' filters
all snapshots...
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
for the case that the user selects only whole datastores, we do not
want to send and (exhaustive) list of snapshots that get restored,
but we only want to honor the mapping the user gives
this avoids using the backup restore codepath that iterates twice
over the tapes and would generally be slower for a lot of snapshots
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
when no uuid/mediaset is given.
we change a bit how we use the uuid by moving it into the viewmodel
(instead of a simple property on the view) so that we can always
use the selected one
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
to make it clear that this button is for restore and for
now we do not have any plans to add buttons here
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
normally, users will not have many tape media pools,
and are more interested in the actual media-sets, so
expand those nodes by default
if the list gets very long, the user can collapse some pools anyway
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
It was not actually bad, so they're quite opinionated to be honest,
but at least xtypes props must go first and variable declaration
should try to be as near as possible to the actual use as long as
code stays sensible readable/short.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
a restore does not change the tape content, so a reload has no benefit here.
since we're touching those lines, change to 'autoShow' property
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
by including the new snapshotselector. If a whole media-set is to be
restored, select all snapshots
to achieve this, we drop the 'restoreid' and 'datastores' properties
for the restore window, and replace them by a 'prefilter' object
(with 'store' and 'snapshot' properties)
to be able to show the snapshots, we now have to always load the
content of that media-set, so drop the short-circuit if we have
the datastores already.
change the layout of the restore window into a two-step window
so that the first tab is the selection what to restore, and on the
second tab the user chooses where to restore (drive, datastore, etc.)
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
* handle not rendered call of getErrors
* return 'all' as value if all snaphots where selected
(for better distinction)
* remove the default height
* add checkChange on stores filterChange
(now change also fires on the gridfilter plugin change)
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
enable scrolling by default, and handle the case that getErrors gets
called when the component is not yet rendered
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
this will be used for letting the user select multiple, individual
snapshots on restore (instead of having a single or the whole media-set)
if a 'prefilter' object is given, we filter the grid by those
values using the gridfilter plugins (like in pve's bulk action windows)
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
instead of having them in the toolbar. This makes the UI more consistent
with the datastore content view.
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
we have 2 modi in that window:
* backup has multiple datastores
* backup has single datastore
In the first case we show a 'mapping' grid so that
the user can only restore a part. Here a user sees all source
Datastores and can select a target for each one.
In the second case we only have a single 'Datastore' selector, but
we do not show the source. Because of this, the naming is slightly ambiguous
(is it the 'Source' or the 'Target' ?), so rename it to 'Target Datastore'.
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
by checking for definedness of the label (tapes without barcode
have the empty string as label-text) and falling back to the
source slot for the load action
Note: Changed the load-slot API from PUT to POST
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Signed-off-by: Dietmar Maurer <dietmar@proxmox.com>
when the user start an action where we know that it locks the drive,
reload the tape store, so that the state is refreshed
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Wolfgang Bumiller
Dietmar Maurer
Dominik Csapak
Thomas Lamprecht