in preparation to also get the file system type from lsblk.
Co-developed-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
Signed-off-by: Fabian Ebner <f.ebner@proxmox.com>
While the PVE one "bails" too, it has an eval around those and moves
the error to the message property, so lets do so too to ensure a user
can force an update on a too old subscription
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
the systemd config/unit parsing stays in pbs for now since
that's not usually required and uses our section config
parser
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
move key_derivation to pbs-datastore
pbs-api-types should only contain "basic" types which
* are usually required by clients
* don't depend on pbs-related code directly
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
These are mostly tokio specific "hacks" or "workarounds" we
only really need/want in our binaries without pulling it in
via our library crates.
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
the dns plugin config allow for a specified amount of time to wait for
the TXT record to be set and propagated through DNS.
This patch adds a sleep for this amount of time.
The log message was taken from the perl implementation in proxmox-acme
for consistency.
Tested with the powerdns plugin in my test setup.
Signed-off-by: Stoiko Ivanov <s.ivanov@proxmox.com>
During startup most of the stuff is happening in milliseconds (or
less), so the timestamp granularity of seconds made it hard to tell
if the previous command required 990ms or 1ms, which is quite the
difference in the restore daemon context.
Using micros seems not to bring too much additional information, a
millisecond is already an ok lower time resolution for logging, so
switch only to millis for now.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
fixes file restore again.
The new Memcom tracking file lives in `/run/proxmox-backup` and is
always created on REST interaction, as CachedUserInfo uses it to
efficiently track config changes, and such a cache is used in each
REST handle_request.
Further, the Memcom infra expects the base run PBS dir to exists
already, which is an OK assumption to have, but in the file-restore
daemon we have a significantly more minimal environment, and the run
dir was simply not required there, even /run isn't a tmpfs yet.
Fixes fda19dcc6f ("fix CachedUserInfo by using a shared memory version counter")
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
We send it already to the user via the response body, but the
log_response does not has, nor wants to have FWIW, access to the
async body stream, so pass it through the ErrorMessageExtension
mechanism like we do else where.
Note that this is not only useful for PBS API proxy/daemon but also
the REST server of the file-restore daemon running inside the restore
VM, and it really is *very* helpful to debug things there..
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Parses JSON output from 'pvs' and 'lvs' LVM utils and does two passes:
one to scan for thinpools and create a device node for their
metadata_lv, and a second to load all LVs, thin-provisioned or not.
Should support every LV-type that LVM supports, as we only parse LVM
tools and use 'vgscan --mknodes' to create device nodes for us.
Produces a two-layer BucketComponent hierarchy with VGs followed by LVs,
PVs are mapped to their respective disk node.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
Reviewed-By: Fabian Grünbichler <f.gruenbichler@proxmox.com>
Prefix zpool mount paths to avoid clashing with other mount namespaces
(like LVM).
Also ignore "already-mounted" error and return it as success instead -
as we always assume that a mount path is unique, this is a safe
assumption, as nothing else could have been mounted here.
This fixes an issue where a mountpoint=legacy subvol might be available
on different disks, and thus have different Bucket instances that don't
share the mountpoint cache, which could lead to an error if the user
tried opening it multiple times on different disks.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
Reviewed-By: Fabian Grünbichler <f.gruenbichler@proxmox.com>
otherwise the path ends in an array ["foo", "bar"] instead of "foo/bar"
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
Reviewed-By: Fabian Grünbichler <f.gruenbichler@proxmox.com>
To support nested BucketComponents, it is necessary to dedup them, as
otherwise two components like:
/foo/bar
/foo/baz
will result in /foo being shown twice at the first hierarchy.
Also make the size property based on index and optional, as for example
/foo in the example above might not have a size, and bar/baz might have
differing sizes.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
Reviewed-By: Fabian Grünbichler <f.gruenbichler@proxmox.com>
since it pulls in lots of additional linked libraries for all binaries
compiled as part of proxmox-backup. it can easily be re-enabled with
`--cfg openid` added to the RUSTFLAGS env variable.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
it's not really needed in the config module, and this makes it easier to
disable the proxmox-openid dependency linkage as a stop-gap measure.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
we try to load the correct media in a loop until we find the correct tape.
when encountering an error or wrong tape, we want to log that (and send
an email if one is set) that requests the correct tape.
while trying to avoid printing the same errors more than once in a row,
we had at least one case (starting with an empty tape in the drive)
which would not print/send any tape request.
reworking that code to use a custom 'TapeRequest' enum, which contains
the state + error message, and a helper that prints and sends an email
when the state changes
this reduces the change check/log to a single variable, instead of 4
(tried, last_media_uuid, last_error, failure_reason)
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Signed-off-by: Dietmar Maurer <dietmar@proxmox.com>
Add test code to the first locate_file command, compute locate_offset.
Subsequent locate_file commands use that offset.
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Signed-off-by: Dietmar Maurer <dietmar@proxmox.com>
we have a static list of filesystems and their capabilities regarding
file attributes and fs features (e.g. sockets/fifos/etc) which also
includes xattrs,acls and fcaps
if we did not know a filesystem by its magic number (for example cephfs),
we did not even attempt to read xattrs, etc.
this patch adds those flags by default to unknown filesystems, and
removes them when we encounter EOPNOTSUPP (to remove the number
of syscalls)
with this, we should be able to catch xattrs/acls/fcaps on all
(unknown) fs types that support them
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
These require mounting using the regular 'mount' syscall.
Auto-generates an appropriate mount path.
Note that subvols with mountpoint=none cannot be mounted this way, and
would require setting the mountpoint property, which is not possible as
the zpools have to be imported with readonly=on.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
Uses the ZFS utils to detect, import and mount zpools. These are
available as a new Bucket type 'zpool'.
Requires some minor changes to the existing disk and partiton detection
code, so the ZFS-specific part can use the information gathered in the
previous pass to associate drive names with their 'drive-xxxN.img.fidx'
node.
For detecting size, the zpool has to be imported. This is only done with
pools containing 5 or less disks, as anything else might take too long
(and should be seldomly found within VMs).
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
Even through best efforts at keeping it small, including the ZFS tools
in the initramfs seems to have exhausted the small overhead we had left
- give it a bit more RAM to compensate.
Also disable the ZFS ARC, as it's no use in such a memory constrained
environment, and we cache on the QEMU/rust layer anyway.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
The future needs to be removed from the pending map in any case, even if
it returned an error, else all upcoming calls to access this key will
always return the same error.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
sort the chunks we want to backup to tape by inode, to gain some
speed on spinning disks. this is done per index, not globally.
costs a bit memory, but not too much, about 16 bytes per chunk which
would mean ~4MiB for a 1TiB index with 4MiB chunks.
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
so that we can reuse that information
the removal of the adding to the corrupted list is ok, since
'get_chunks_in_order' returns them at the end of the list
and we do the same if the loading fails later in 'verify_index_chunks'
so we still mark them corrupt
(assuming that the load will fail if the stat does)
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
since the output:
Result: "<UPID>"
is not really interesting, show instead the task log while
the datastore is creating, since it is now run in a worker
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Setting this to 0 is not just useless, but breaks the logic horribly
enough to cause random segfaults - better forbid this, to avoid someone
else having to debug it again ;)
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
admin/datastore reads linearly only, so no need for cache (capacity of 1
basically means no cache except for the currently active chunk).
mount can do random access too, so cache last 8 chunks for possibly a
mild performance improvement.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
Implemented as a seperate struct SeekableCachedChunkReader that contains
the original as an Arc, since the read_at future captures the
CachedChunkReader, which would otherwise not work with the lifetimes
required by AsyncRead. This is also the reason we cannot use a shared
read buffer and have to allocate a new one for every read. It also means
that the struct items required for AsyncRead/Seek do not need to be
included in a regular CachedChunkReader.
This is intended as a replacement for AsyncIndexReader, so we have less
code duplication and can utilize the LRU cache there too (even though
actual request concurrency is not supported in these traits).
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
Supports concurrent 'access' calls to the same key via a
BroadcastFuture. These are stored in a seperate HashMap, the LruCache
underneath is only modified once a valid value has been retrieved.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
Explicitly test that data will stay available and can be retrieved
immediately via listen(), even if the future producing the data and
notifying the consumers was already run in the past.
Wasn't broken or anything, but helps with understanding IMO.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
in PVE, the logic how wearout gets read from the smartctl output was
changed from a vendor -> id map to a sorted list of specific
attribute field names.
copy that list to pbs (in the same order), and use that to get the
wearout
in the future we might want to split the disk logic into its own crate
and reuse it in pve
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
we skip snapshots that are older than the newest snapshot of the group in
the target datastore, log it so the user can know why it is not synced
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
so that longer running creates (e.g. a slow storage), does not
run in a timeout and we can follow its creation
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Signed-off-by: Dietmar Maurer <dietmar@proxmox.com>
when we remove a datastore via api/cli, the proxy
has sometimes leftover references to that datastore in its
DATASTORE_MAP which includes an open filehandle on the
'.lock' file
this prevents unmounting/exporting the datastore even after removal,
only a reload/restart of the proxy did help
add a command to our command socket, which removes all non
configured datastores from the map, dropping the open filehandle
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Signed-off-by: Dietmar Maurer <dietmar@proxmox.com>
by implementing a custom error type that is either 'TimeOut' or
'Other'.
In the api, check in the worker loop for exactly 'TimeOut' errors and continue only
then. All other errors lead to a aborted task.
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
removing the backup dir must acquire the snapshot lock, else it can
happen that we remove a snapshot while it is being restored
or backed up to tape
the original commit that adds the force flag
(c9756b40d1)
mentions that the prune checks itself if the snapshot is in use,
but i could not find such code, so simply set force to false
to avoid failing and aborting the prune job, warn if it could not
and continue
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
This reverts commit 75f9f40922, which is
no longer needed now that we use tokio >= 1.6 which contains the proper
fix.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
this is deprecated with rustc 1.52+, and will become a hard error at
some point:
https://github.com/rust-lang/rust/issues/79202
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
from the SspDataEncryptionCapabilityPage
it seems we do not need it, since the EXTDECC flag is only used for
determining if the drive is capable to be configured via
ADI (Automation/Drive Interface) which we do not use at all.
this makes the call work with LTO-4 again
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
we want a 'media-set' selector in the gui, this makes it
very easy to do and is not as costly as reusing the media list,
since we do not need to iterate over all media (e.g. unassigned)
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
by extracting them via the api macro into the function signature
this fixes an issue, where giving 'since' and 'until' where not
used since we tried to extract them as 'str' while they were numbers.
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
While the issue with vsock packets starving kernel memory is mostly
worked around by the '64k -> 4k buffer' patch in
'proxmox-backup-restore-image', let's be safe and also limit the number
of concurrent transfers. 8 downloads per VM seems like a fair value.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
The extract API call may be active for more than the watchdog timeout,
so a simple ping is not enough.
This adds an "inhibit" API, which will stop the watchdog from completing
as long as at least one WatchdogInhibitor instance is alive. Keep one in
the download task, so it will be dropped once it completes (or errors).
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
See this PR for more info: https://github.com/tokio-rs/tokio/pull/3756
As a workaround use a pair of connected unix sockets - this obviously
incurs some overhead, albeit not measureable on my machine. Once tokio
includes the fix we can go back to a DuplexStream for performance and
simplicity.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
Used to specify a filesystem placed directly on a disk, without a
partition table inbetween. Detected by simply attempting to mount the
disk itself.
A helper "make_dev_node" is extracted to avoid code duplication.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
A bucket might contain multiple (or 0) layers of components in its path
specification, so allow a mapping between bucket type strings and
expected component depth. For partitions, this is 1, as there is only
the partition number layer below the "part" node.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
This can happen if the underlying storage failed, in which case we do
not want to fail the whole API call, as it should report the status
of all datastores. So rather add the error inline to the related
store entry and continue.
Allows to nicely visualize those stores in the gui.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
it's the only PBS-specific part in there, so let's make it
product-agnostic before moving it off to proxmox-http.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
so that a user can delete a whole group at once, until now, the fastest
way for this was to prune to one snapshot, and delete that
code is basically a copy/paste from the snapshot delete, sans
the 'backup-time' parameter
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
so that a user can force a new media set, e.g. if he uses the
allocation policy 'continue', but wants to manually start a new
media-set.
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
if the account does not exist, error with its name
if file loading fails, the error includes the full path
if the content fails to parse, show file & parse error
and in each case mention that it's about loading the acme account file
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
syncs behavior with both, the displayed state in the PBS
web-interface, and the behavior of PVE/PMG.
Without this a standard setup would result in a Error like:
> TASK ERROR: no acme client configured
which was pretty confusing, as the actual error was something else
(no account configured), and the web-interface showed "default" as
selected account, so a user had no idea what actually was wrong and
how to fix it.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
- refactor the combinators,
- make it take a `&T: Serialize` instead of a Value, and
allow sending the raw string via `send_raw_command`.
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
return a result with optional fingerprint instead of tuple, allowing
easy extraction of a meaningful error message.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
if the expected fingerprint and the one returned by the server don't
match, print a warning and allow confirmation and proceeding if running
interactive.
previous:
$ proxmox-backup-client ...
Error: error trying to connect: error:1416F086:SSL routines:tls_process_server_certificate:certificate verify failed:../ssl/statem/statem_clnt.c:1915:
new:
$ proxmox-backup-client ...
WARNING: certificate fingerprint does not match expected fingerprint!
expected: ac:cb:6a:bc:d6:b7:b4:77:3e:17:05:d6:b6:29:dd:1f:05:9c:2b:3a:df:84:3b:4d:f9:06:2c:be:da:06:52:12
fingerprint: ab:cb:6a:bc:d6:b7:b4:77:3e:17:05:d6:b6:29:dd:1f:05:9c:2b:3a:df:84:3b:4d:f9:06:2c:be:da:06:52:12
Are you sure you want to continue connecting? (y/n): n
Error: error trying to connect: error:1416F086:SSL routines:tls_process_server_certificate:certificate verify failed:../ssl/statem/statem_clnt.c:1915:
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
this makes it possible to only restore some snapshots from a tape media-set
instead of the whole. If the user selects only a small part, this will
probably be faster (and definitely uses less space on the target
datastores).
the user has to provide a list of snapshots to restore in the form of
'store:type/group/id'
e.g. 'mystore:ct/100/2021-01-01T00:00:00Z'
we achieve this by first restoring the index to a temp dir, retrieving
a list of chunks, and using the catalog, we generate a list of
media/files that we need to (partially) restore.
finally, we copy the snapshots to the correct dir in the datastore,
and clean up the temp dir
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
and create the 'email' and 'restore_owner' variable at the beginning,
so that we can reuse them and do not have to pass the sources of those
through too many functions
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
if the reader thread is already gone here, we panic here, resulting in
a nondescript error message, so simply ignore/warn in that case and
return gracefully
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
It may make sense in the future, e.g., if the built-in standalone
type is not enough, e.g., as HTTP**s**, HTTP 2 or even QUIC (HTTP 3)
is wanted in some setups, but for now there's no scenario where one
would profit from adding a new HTTP plugin, especially as it requires
the `data` property to be set, which makes no sense..
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
we cannot add a plugin with an existing ID so this completion helper
is rather counterproductive...
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
It will be reused in a later patch in another module which should not
depend on the actual API implementation (ugly and cyclic)
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Fabian Ebner
Thomas Lamprecht
Wolfgang Bumiller
Dominik Csapak
Hannes Laimer
Stoiko Ivanov
Stefan Reiter
Fabian Grünbichler
Dietmar Maurer
Oguz Bektas
Dylan Whyte