those calls could also block, so we have to run them in a blocking
tokio task, as to not block the current thread
nice side effect is that we now also update the state for that
drive in those instances
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
we will reuse that code in the client, so we need to move it to
where we can access it from the client
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
[clippy fixes]
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
we will reuse that later in the client, so we need it somewhere
we can use from there
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
[add strongly typed ArchiveEntry and put api code into helpers.rs]
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
if given, erases the tape only iff the inserted tape contains that label
used to safeguard tape erasing from ui for standalone drives
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
this check is not perfect since there are often multiple device
nodes per drive/changer, but from the scan api we should return always
the same, so for an api user this should be enough
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
so that an api user can get the drives belonging to a changer
without having to parse the config listing themselves
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
similar to the changers, create a listing at /tape/drive and put
the specific api calls below that
move the scan api call up one level
remove the status info from the config listing
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
so that an api user can see which drive belongs to which drivenum of a changer
for ones with multiple drives
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
add a changer listing here (copied from api2/config/changer)
and put the status and transfer api calls below that
puts the changer scan into the top level tape api
and removes the (now redundant) info from the config api path
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
all the verify methods pass along the following:
- task worker
- datastore
- corrupt and verified chunks
might as well pull that out into a common type, with the added bonus of
now having a single point for construction instead of copying the
default capacaties in three different modules..
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
it's needed to derive Hash, and we always compare Authids or their
Userid components, never just the Tokenname part anyway..
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
chunk_stream one can be collapsed, since split == split_to with at set
to buffer.len() anyway.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
Currently there's not yet a node config and the WA config is
somewhat "tightly coupled" to the user entries in that
changing it can lock them all out, so for now I opted for
fewer reorganization and just use a digest of the
canonicalized config here, and keep it all in the tfa.json
file.
Experimentally using the flatten feature on the methods with
an`Updater` struct similar to what the api macro is supposed
to be able to derive on its own in the future.
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
modifying @pam users credentials should be only possible for root@pam,
otherwise it can have unintended consequences.
also enforce the same limit on user creation (except self_service check,
since it makes no sense during user creation)
Signed-off-by: Oguz Bektas <o.bektas@proxmox.com>
to wrap a Receiver in a Stream. this will likely move back into tokio
proper once we have a std Stream..
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
Child itself is no longer a Future, but it has a new wait() async fn
that does the same thing
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
the old variant attempted to parse a tokenid as userid and returned the
cryptic parsing error to the client, which is rather confusing.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
percentage of verified groups, interpolating based on snapshot count
within the group. in most cases, this will also be closer to 'real'
progress since added snapshots (those which will be verified) in active
backup groups will be roughly evenly distributed, while number of total
snapshots per group will be heavily skewed towards those groups which
have existed the longest, even though most of those old snapshots will
only be re-verified very infrequently.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
before adding more fields to the tuple, let's just create the struct
inside the match arms to improve readability.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
and use this information to add more information to client backup log
and guide the download manifest decision.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
else users have to manually search through a potentially very long task
log to find the entries that are different.. this is the same summary
printed at the end of a manual verify task.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
unprivileged users should only see the counts related to their part of
the datastore.
while we're at it, switch to a list groups, filter groups, count
snapshots approach (like list_snapshots) to speedup calls to this
endpoint when many unprivileged users share a datastore.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
used in the PBS GUI, but also for PVE usage queries which don't need all
the extra expensive information..
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
by listing groups first, then filtering, then listing group snapshots.
this cuts down the number of openat/getdirents calls for users that just
have a partial view of the datastore.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
Add an optional string field to APTUpdateInfo which can be used for
extra information.
This is used for passing running kernel and running version information
in the versions API call together with proxmox-backup and
proxmox-backup-server.
Signed-off-by: Mira Limbeck <m.limbeck@proxmox.com>
for now this only does the 'postfix' -> 'postfix@-' conversion,
fixes the issue that we only showed the 'postfix' service syslog
(which is rather empty in a default setup) instead of the instance one
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
log invalid owners to system log, and continue with next group just as
if permission checks fail for the following operations:
- verify store with limited permissions
- list store groups
- list store snapshots
all other call sites either handle it correctly already (sync/pull), or
operate on a single group/snapshot and can bubble up the error.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
similar to what we do for zfs. By bailing before partitioning, the disk is
still considered unused after a failed attempt.
Signed-off-by: Fabian Ebner <f.ebner@proxmox.com>
If a package is or will be installed from the enterprise repo, retrieve
the changelog from there as well (securely via HTTPS and authenticated
with the subcription key).
Extends the get_string method to take additional headers, in this case
used for 'Authorization'. Hyper does not have built-in basic auth
support AFAICT but it's simple enough to just build the header manually.
Take the opportunity and also set the User-Agent sensibly for GET
requests, just like for POST.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
to easily check the store of a worker_id
this fixes the issue that one could not filter by type 'syncjob' and
datastore simultaneously
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
very basic, based on API/concepts of PVE one.
Still missing, addint an extra_info string option to APTUpdateInfo
and pass along running kernel/PBS version there.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
with remote Authids, not local Userids.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
if the user/token could have either configured/manually executed the
task, but it was either executed via the schedule (root@pam) or
another user/token.
without this change, semi-privileged users (that cannot read all tasks
globally, but are DatastoreAdmin) could schedule jobs, but not read
their logs once the schedule executes them. it also makes sense for
multiple such users to see eachothers manually executed jobs, as long as
the privilege level on the datastore (or remote/remote_store/local
store) itself is sufficient.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
since the store is not a path parameter, we need to do manual instead of
schema checks. also dropping Datastore.Backup here
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
to allow on-demand scanning of remote datastores accessible for the
configured remote user.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
we have information here not available in the access log, especially
if the /api2/extjs formatter is used, which encapsulates errors in a
200 response.
So keep the auth log for now, but extend it use from create ticket
calls to all authentication failures for API calls, this ensures one
can also fail2ban tokens.
Do that logging in a central place, which makes it simple but means
that we do not have the user ID information available to include in
the log.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
and change all users of the /status/tasks api call to this
with this change we can now delete the /status/tasks api call
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
instead of returning 0 elements (which does not really make sense anyway),
change it so that there is no limit anymore (besides usize::MAX)
this is technically a breaking change for the api, but i guess
no one is using limit=0 for anything sensible anyway
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
should cover all the current scenarios. remote server-side checks can't
be meaningfully unit-tested, but they are simple enough so should
hopefully never break.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
instead of manually, this has the advantage that we now set
the jobstate correctly and can return with an error if it is
currently running (instead of failing in the task)
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
by requiring
- Datastore.Backup permission for target datastore
- Remote.Read permission for source remote/datastore
- Datastore.Prune if vanished snapshots should be removed
- Datastore.Modify if another user should own the freshly synced
snapshots
reading a sync job entry only requires knowing about both the source
remote and the target datastore.
note that this does not affect the Authid used to authenticate with the
remote, which of course also needs permissions to access the source
datastore.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
instead of hard-coding 'backup@pam'. this allows a bit more flexibility
(e.g., syncing to a datastore that can directly be used as restore
source) without overly complicating things.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
again, base idea copied off PVE, but, we safe the information about
which pending version we send a mail out already in a separate
object, to keep the api return type APTUpdateInfo clean.
This also makes a few things a bit easier, as we can update the
package status without saving/restoring the notify information.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
apt changes some of its state/cache also if it errors out, most of
the time, so we actually want to print both, stderr and stdout.
Further, only warn if its exit code is non-zero, for the same
rationale, it may bring updates available even if it errors (e.g.,
because a future pbs-enterprise repo is additionally configured but
not accessible).
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
equivalent to verifying a whole datastore, except for reading job
(entries), which is accessible to regular Datastore.Audit/Backup users
as well.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
for verifying a whole datastore. Datastore.Backup now allows verifying
only backups owned by the triggering user.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
they are returned when reading the manifest, which just requires
Datastore.Audit as well. Datastore.Read is for reading backup contents,
not metadata.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
even for otherwise unprivileged users.
since effective privileges of an API token are always intersected with
those of their owning user, this does not allow an unprivileged user to
elevate their privileges in practice, but avoids the need to involve a
privileged user to deploy API tokens.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
a user should be allowed to read/list/overwrite backups owned by their
own tokens, but a token should not be able to read/list/overwrite
backups owned by their owning user.
when changing ownership of a backup group, a user should be able to
transfer ownership to/from their own tokens if the backup is owned by
them (or one of their tokens).
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
since it's not possible to extend existing structs, UserWithTokens
duplicates most of user::User.. to avoid duplicating user::ApiToken as
well, this returns full API token IDs, not just the token name part.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
in most generic places. this is accompanied by a change in
RpcEnvironment to purposefully break existing call sites.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
with an optional Tokenname, appended with '!' as delimiter in the string
representation like for PVE.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
by moving the properties of the storage status out again to the top
level object
also introduce proper structs for the types used, to get type-safety
and better documentation for the api calls
this changes the backup counts from an array of [groups,snapshots] to
an object/struct with { groups, snapshots } and include 'other' types
(though we do not have any at this moment)
this way it is better documented
this also adapts the ui code to cope with the api changes
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
This is indented to be used for the PVE storage library, replacing
the missuse of the much more expensive status API call.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
For proxmox packages it works the same way as PVE, by retrieving the
changelog URL and issuing a HTTP GET to it, forwarding the output to the
client. As this is only supposed to be a workaround removed in the
future, a simple block_on is used to avoid async.
For debian packages we can simply call 'apt-get changelog' and forward
it's output.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
As always, libapt is mocking us with complexity, but we can get the
approximate result we want by retrieving dependencies of all
to-be-updated packages and then seeing if they are missing.
If they are, we assume they will be installed.
For this, query_detailed_info is extended to allow reading details for
non-installed packages, and this is also exposed in
list_installed_apt_packages via 'all_versions_for'. This is necessary so
we can retrieve changelogs for such packages.
Note that we cannot retrieve all that information all the time, as
querying details for packages that aren't installed takes a rather long
time.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
Avoids custom hardcoded logic, but can only be used for debian packages
as of now. Adds a FIXME to switch over to use --print-uris only once our
package repos support that changelog format.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
To get package details for a specific version instead of only the
candidate.
Also cleanup filter function with extra struct instead of unnamed &str
parameters.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
gets rid of the return value and moving around of the zip
and decoder data
avoids cloning the path prefix on every recursion
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
by using the new ZipEncoder and recursively add files to it
the zip only contains directories, normal files and hardlinks (by simply
copying the content), no symlinks, etc.
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
To cater to the paranoid, a new datastore-wide setting "verify-new" is
introduced. When set, a verify job will be spawned right after a new
backup is added to the store (only verifying the added snapshot).
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
Commit 9070d11f4c introduced this change for other call sites,
assuming it is correct, this one was missed.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
for now log auth errors also to the syslog, on a protected (LAN
and/or firewalled) setup this should normally happen due to
missconfiguration, not tries to break in.
This reduces syslog noise *a lot*. A current full journal output from
the current boot here has 72066 lines, of which 71444 (>99% !!) are
"successful auth for user ..." messages
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
needs new proxmox dependency to get the RpcEnvironment changes,
adding client_ip getter and setter.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Avoid races when updating manifest data by flocking a lock file.
update_manifest is used to ensure updates always happen with the lock
held.
Snapshot deletion also acquires the lock, so it cannot interfere with an
outstanding manifest write.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
There's no point in having that as a seperate method, just parse the
thing into a struct and write it back out correctly.
Also makes further changes to the method simpler.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
...to avoid it being forgotten or pruned while in use.
Update lock error message for deletions to be consistent.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
To allow other reading operations on the base snapshot as well. No
semantic changes with this patch alone, as all other locks on snapshots
are exclusive.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
A removal can fail if the snapshot is already gone (this is fine, our
job is done either way) or we couldn't get a lock (also fine, it can't
be removed then, just warn the user so he knows what happened and why it
wasn't removed) - keep going either way.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
A snapshot that's currently being read can still appear in the prune
list, but should not be removed.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
To untangle the server code from the actual backup
implementation.
It would be ideal if the whole backup/ dir could become its
own crate with minimal dependencies, certainly without
depending on the actual api server. That would then also be
used more easily to create forensic tools for all the data
file types we have in the backup repositories.
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
via HTTP2/backup reader protocol. they already could do so via the plain
HTTP download-file/.. API calls that the GUI uses, but the reader
environment required READ permission on the whole datastore instead of
just BACKUP on the backup group itself.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
a reader connection should not be allowed to read arbitrary chunks in
the datastore, but only those that were previously registered by opening
the corresponding index files.
this mechanism is needed to allow unprivileged users (that don't have
full READ permissions on the whole datastore) access to their own
backups via a reader environment.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
not triggered by any current code, but this would lead to a stack
exhaustion since borrow would call deref which would call borrow again..
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
Previously only Datastore.Modify was required for creating a new
datastore.
But, that endpoint allows one to pass an arbitrary path, of which all
parent directories will be created, this can allow any user with the
"Datastore Admin" role on "/datastores" to do some damage to the
system. Further, it is effectively a side channel for revealing the
systems directory structure through educated guessing and error
handling.
Add a new privilege "Datastore.Allocate" which, for now, is used
specifically for the create datastore API endpoint.
Add it only to the "Admin" role.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
the same as the regular TaskState, but without its fields, so that
we can use the api macro and use it as api call parameter
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
