Causes a panic if last_update is smaller than RRD_DATA_ENTRIES*reso,
which (I believe) can happen when inserting the first value for a DB.
Clamp the value to 0 in that case.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
Fix a potential bug where errors that happen after the SendHandle has
been dropped while doing the thread join might have been ignored.
Requires internal check_abort to be moved out of 'impl SendHandle' since
we only have the Mutex left, not the SendHandle.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
This can slow things down by a lot on setups with (relatively) high
seek time, in the order of doubling the backup times if cache isn't
populated with the last backups chunk inode info.
Effectively there's nothing known this protects us from in the
codebase. The only thing which was theorized about was the case
where a really long running backup job (over 24 hours) is still
running and writing new chunks, not indexed yet anywhere, then an
update (or manual action) triggers a reload of the proxy. There was
some theory that then a GC in the new daemon would not know about the
oldest writer in the old one, and thus use a less strict atime limit
for chunk sweeping - opening up a window for deleting chunks from the
long running backup.
But, this simply cannot happen as we have a per datastore process
wide flock, which is acquired shared by backup jobs and exclusive by
GC. In the same process GC and backup can both get it, as it has a
process locking granularity. If there's an old daemon with a writer,
that also has the lock open shared, and so no GC in the new process
can get exclusive access to it.
So, with that confirmed we have no need for a "half-assed"
verification in the backup finish step. Rather, we plan to add an
opt-in "full verify each backup on finish" option (see #2988)
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
We forgot to put braces around the DNS_NAME regex, and in
DNS_NAME_OR_IP_REGEX
this is wrong because the regex
^foo|bar$
matches 'foo' at the beginning and 'bar' at the end, so either
foobaz
bazbar
would match. only
^(foo|bar)$
matches only 'foo' and 'bar'
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
* add square brackets to ipv6 adresses in BackupRepository if they not
already have some (we save them without in the remote config)
* in get_pull_parameters, we now create a BackupRepository first and use
those values (which does the [] mapping), this also has the advantage
that we have one place less were we hardcode 8007 as port
* in the ui, add square brackets for ipv6 adresses for remotes
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
when upgrading from a version where we stored all tasks in the 'active' file,
we did not completly account for finished tasks still there
we should update the file when encountering any finished task in
'active' as well as filter them out on the api call (if they get through)
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
this adds the ability to add port numbers in the backup repo spec
as well as remotes, so that user that are behind a
NAT/Firewall/Reverse proxy can still use it
also adds some explanation and examples to the docs to make it clearer
for h2 client i left the localhost:8007 part, since it is not
configurable where we bind to
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
When creating a new zpool for a datastore, also instantiate an
import-unit for it. This helps in cases where '/etc/zfs/zool.cache'
get corrupted and thus the pool is not imported upon boot.
This patch needs the corresponding addition of 'zfs-import@.service' in
the zfsonlinux repository.
Suggested-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
Signed-off-by: Stoiko Ivanov <s.ivanov@proxmox.com>
we need this, because we append the port to this to get a target url
e.g. we print
format!("https://{}:8007/", address)
if address is now an ipv6 (e.g. fe80::1) it would become
https://fe80::1:8007/ which is a valid ipv6 on its own
by using square brackets we get:
https://[fe80::1]:8007/ which now connects to the correct ip/port
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
since len() and MAX_INDEX_TASKS are both usize, they underflow
instead of getting negative values
instead check the sizes and set them accordingly
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
this starts a task once a day at "00:00" that rotates the task log
archive if it is bigger than 500k
if we want, we can make the schedule/size limit/etc. configurable,
but for now it's ok to set fixed values for that
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
since there are no users of this anymore and we now have a nicer
TaskListInfoIterator to use, we can drop this function
this also means that 'update_active_workers' does not need to return
a list anymore since we never used that result besides in
read_task_list
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
this means that limiting with epoch now works correctly
also change the api type to i64, since that is what the starttime is
saved as
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
this makes the filtering/limiting much nicer and readable
since we now have potentially an 'infinite' amount of tasks we iterate over,
and cannot now beforehand how many there are, we return the total count
as always 1 higher then requested iff we are not at the end (this is
the case when the amount of entries is smaller than the requested limit)
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
this is an iterator that reads/parses/updates the task list as
necessary and returns the tasks in descending order (newest first)
it does this by using our logrotate iterator and using a vecdeque
we can use this to iterate over all tasks, even if they are in the
archive and even if the archive is logrotated but only read
as much as we need
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
instead of removing tasks beyond the 1000 that are in the index
write them into an archive file by appending them at the end
this way we can later still read them
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
one for only the active tasks and one for up to 1000 finished tasks
factor out the parsing of a task file (we will later need this again)
and use iterator combinators for easier code
we now sort the tasks ascending (this will become important in a later patch)
but reverse (for now) it to keep compatibility
this code also omits the converting into an intermittent hash
since it cannot really happen that we have duplicate tasks in this list
(since the call is locked by an flock, and it is the only place where we
write into the lists)
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
this is a helper to rotate and iterate over log files
there is an iterator for open filehandles as well as
only the filename
also it has the possibilty to rotate them
for compression, zstd is used
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
also changes:
* correct comment about reset (replace 'sync' with 'action')
* check schedule change correctly (only when it is actually changed)
with this changes, we can drop the 'lookup_last_worker' method
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
we rely on the jobstate handling to write the error of the worker
into its state file, but we used '?' here in a block which does not
return the error to the block, but to the function/closure instead
so if a prune job failed because of such an '?', we did not write
into the statefile and got a wrong state there
instead use our try_block! macro that wraps the code in a closure
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
like the sync jobs, so that if an admin configures a schedule it
really starts the next time that time is reached not immediately
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
listing, updating or deleting a user is now possible for the user
itself, in addition to higher-privileged users that have appropriate
privileges on '/access/users'.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
filtered by those they are privileged enough to read individually. this
allows such users to configure prune/GC schedules via the GUI (the API
already allowed it previously).
permission-wise, a user with this privilege can already:
- list all stores they have access to (returns just name/comment)
- read the config of each store they have access to individually
(returns full config of that datastore + digest of whole config)
but combines them to
- read configs of all datastores they have access to (returns full
config of those datastores + digest of whole config)
user that have AUDIT on just /datastore without propagate can now no
longer read all configurations (but this could be added it back, it just
seems to make little sense to me).
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
by packing the auth into a RwLock and starting a background
future that renews the ticket every 15 minutes
we still use the BroadcastFuture for the first ticket and only
if that is finished we start the scheduled future
we have to store an abort handle for the renewal future and abort it when
the http client is dropped, so we do not request new tickets forever
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
like we do for PVE. this is visible on the dashboard, and caused 403 on
each update which bothers me when looking at the dev console.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
A client can omit uploading chunks in the "known_chunks" list, those
then also won't be written on the server side. Check all those chunks
mentioned in the index but not uploaded for existance and report an
error if they don't exist instead of marking a potentially broken backup
as "successful".
This is only important if the base snapshot references corrupted chunks,
but has not been negatively verified. Also, it is important to only
verify this at the end, *after* all index writers are closed, since only
then can it be guaranteed that no GC will sweep referenced chunks away.
If a chunk is found missing, also mark the previous backup with a
verification failure, since we know the missing chunk has to referenced
in it (only way it could have been inserted to known_chunks with
checked=false). This has the benefit of automatically doing a
full-upload backup if the user attempts to retry after seeing the new
error, instead of requiring a manual verify or forget.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
Do not allow clients to reuse chunks from the previous backup if it has
a failed validation result. This would result in a new "successful"
backup that potentially references broken chunks.
If the previous backup has not been verified, assume it is fine and
continue on.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
- remove chrono dependency
- depend on proxmox 0.3.8
- remove epoch_now, epoch_now_u64 and epoch_now_f64
- remove tm_editor (moved to proxmox crate)
- use new helpers from proxmox 0.3.8
* epoch_i64 and epoch_f64
* parse_rfc3339
* epoch_to_rfc3339_utc
* strftime_local
- BackupDir changes:
* store epoch and rfc3339 string instead of DateTime
* backup_time_to_string now return a Result
* remove unnecessary TryFrom<(BackupGroup, i64)> for BackupDir
- DynamicIndexHeader: change ctime to i64
- FixedIndexHeader: change ctime to i64
since converting from i64 epoch timestamp to DateTime is not always
possible. previously, passing invalid backup-time from client to server
(or vice-versa) panicked the corresponding tokio task. now we get proper
error messages including the invalid timestamp.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
otherwise operations like catalog shell panic when viewing pxar archives
containing such entries, e.g. with mtime very far ahead into the future.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
by either printing the original, out-of-range timestamp as-is, or
bailing with a proper error message instead of panicking.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
even if it can't be handled by chrono. silently replacing it with epoch
0 is confusing..
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
else we get the default of 16k, which is quite low for our use case.
this improves the TLS upload benchmark speed by about 30-40% for me.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
fixes the error, "manifest does not contain
file 'X.pxar'", that occurs when trying to mount
a pxar archive with 'proxmox-backup-client mount':
Signed-off-by: Dylan Whyte <d.whyte@proxmox.com>
similar to the other fix, if we do not set the buffer size manually,
we get better performance for high latency connections
restore benchmark from f.gruenbicher:
no delay, without patch: ~50MB/s
no delay, with patch: ~50MB/s
25ms delay, without patch: ~11MB/s
25ms delay, with path: ~50MB/s
my own restore benchmark:
no delay, without patch: ~1.5GiB/s
no delay, with patch: ~1.5GiB/s
25ms delay, without patch: 30MiB/s
25ms delay, with patch: ~950MiB/s
for some more details about those benchmarks see
https://lists.proxmox.com/pipermail/pbs-devel/2020-September/000600.html
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
by leaving the buffer sizes on default, we get much better tcp performance
for high latency links
throughput is still impacted by latency, but much less so when
leaving the sizes at default.
the disadvantage is slightly higher memory usage of the server
(details below)
my local benchmarks (proxmox-backup-client benchmark):
pbs client:
PVE Host
Epyc 7351P (16core/32thread)
64GB Memory
pbs server:
VM on Host
1 Socket, 4 Cores (Host CPU type)
4GB Memory
average of 3 runs, rounded to MB/s
| no delay | 1ms | 5ms | 10ms | 25ms |
without this patch | 230MB/s | 55MB/s | 13MB/s | 7MB/s | 3MB/s |
with this patch | 293MB/s | 293MB/s | 249MB/s | 241MB/s | 104MB/s |
memory usage (resident memory) of proxmox-backup-proxy:
| peak during benchmarks | after benchmarks |
without this patch | 144MB | 100MB |
with this patch | 145MB | 130MB |
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Stefan Reiter
Thomas Lamprecht
Dietmar Maurer
Dominik Csapak
Stoiko Ivanov
Wolfgang Bumiller
Fabian Grünbichler
Hannes Laimer
Dylan Whyte