listing the media can potentially hang (changer status), so do not
reload in the background, only on activate
also increase the timeout to 5 minutes and add a reload button
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
since tape commands can take a while and we do not want to change
all of those to worker tasks, increase the timeout to 5 minutes
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
do not only show if labeled, but the whole status (full/writeable/etc.)
and to which pool the tape belongs (if any)
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
instead of showing the snapshots directly under the pool and then the
media-sets, list the media-sets under the pool and only after the
snapshots
this has several advantages:
* we only have to read one set of tape catalog data on expand and not all of
them everytime (which does not scale)
* we can show media-sets without snapshots, this can happen when we
inventoried a set of tapes from another pbs instance, or lost the
catalog data somehow
the disadvantage is that one has to go look for the media set where the
snapshot is included, but we can solve this by implementing a search
function in the future (in the backend)
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
s/availabel/available/g
no semantic change at all
Signed-off-by: Oguz Bektas <o.bektas@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
we include all tasks whose type start with 'verif' in the type 'verify'
but if we want to actually show them in the pop-up, we have to reverse
map this back to 'verif', else there are tasks missing from there
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
and fix some issues from referenced named the same as their heading
they anchor too.
This should be fixed for real in our python plugin to scan for such
references, its probably a bug there, but as most of the problematic
ones where wrong (missing chapter prefix) anyway changing them is OK
too.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Co-Authored-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Tested-by: Oguz Bektas <o.bektas@proxmox.com>
Signed-off-by: Oguz Bektas <o.bektas@proxmox.com>
since we do not show the tapes anymore in the BackupOverview, add
another panel where we can list the available tapes in the inventory
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
instead of grouping by tape (which is rarely interesting),
group by pool -> group -> id -> mediaset
this way a user looking for a backup of specific vm can do just that
we may want to have an additional view here were we list all snapshots
included in the selected media-set ?
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
mostly typical CRUD interface for managing drives, with an
additional actioncolumn containing some useful actions, e.g.
* reading the label
* show volume-statistics
* show the status
* label the inserted tape
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
this lets the users manage changers and lets them view the status of one
by having an overview of:
* slots for tapes
* import/export slots
* drives
lets the user:
* barcode-label all the tapes in the library
* move tapes between slots, into/out of drives
* show some basic info when a tape is loaded into a drive
* show the status of a drive
* clean a drive
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
shows all tapes with the relevant info
* which pool it belongs to
* what backups are on it
* which media-set
* location
* etc.
This is very rough, and maybe not the best way to display this information.
It may make sense to reverse the tree, i.e. having pools at top-level,
then media-sets, then tapes, then snapshots..
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
includes edit windows for
* Drives
* Changers
* Media Pools
* Labeling Media
* Making new Tape Backups
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Fix two things:
* do not reject the login promise when we get the abort DOMException
error
* safely save the original challenge string as we work on a reference
here and avoid to convert to a UInt8 array twice to avoid an
exception.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
simple heuristic for those people who always prefer a specific TFA
method and have the others only as backup.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Improve UX by avoiding the need to click some buttons twice, or
calling TOTP and Recovery codes both "OTP" codes and showing multiple
buttons, with all having the same goal "submit a TFA token" at the
same time.
Instead use a tab panel with a single submit button.
WebAuthn can and should be still improved, but that can be OK as
followup.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
userid parameter needs to be properly encoded when shown on the browser
Signed-off-by: Oguz Bektas <o.bektas@proxmox.com>
Reviewed-by: Dominik Csapak <d.csapak@proxmox.com>
This is wrong most of the time, when not loading the web interface
with valid credentials, and thus some checks or defaults did not
evaluated correctly when the underlying value was only set later.
Needs to be set on component creation only, this can be done through
initComponent, even listeners, view controllers or cbind closures.
Use the latter, as all affected components already use cbind.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
present all relevant information about the TFA token to be removed,
so that a user can make a better decision.
Rework layout to match our commonly used style.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Clarify that the password of the user one wants to add TFA too is
required, which is not necessarily the one of the current logged in
user. Use an empty text for that.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
the password field should not be indented differently than the rest of
the fields, and we never have a border on the panels
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
we can reuse the edit window from widget toolkit for the most part
this solves some spacing and layout issues and is less code
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
an empty schedule means 'none', so do not fill it with the default
in case we edit an existing job (like we do already for sync jobs)
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
findRecord does not match exactly, but only at the beginning and
case insensitive, by default. Change all calls to be case sensitive
and an exactmatch (we never want the default behaviour afaics).
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
used in the PBS GUI, but also for PVE usage queries which don't need all
the extra expensive information..
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
avoids that it shows during store load, we do not know if there are
no datastores at that point and have already a loading mask.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
when we could not load the config (e.g. missing permissions)
show the comment from the global datastore-list
also show a messagebox for a load error instead of setting
the text of the comment box
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
the .lint-incremental target, which is implicitly used by the install
target, is still more forgiving to allow faster "change, build, test"
iteration when developing.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Without hyphens, we had 20 hex digits, so ~80 bit which is probably overkill.
Use 12 (13 with hyphen), this is still 48 bit.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
add missing help buttons (question mark, top right) so that we are
consistent and each panel has it.
I chose the IMHO most fitting sections.
Signed-off-by: Aaron Lauterer <a.lauterer@proxmox.com>
its rather hacky, but our cbind mixin does not support columns (yet).
if it does sometime in the future, we could use that instead
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
added a few more help buttons were appropriate:
* GC and Prune schedule windows
* Create Directory window
* API Tokens, link directly to token section
* verify jobs window
Signed-off-by: Aaron Lauterer <a.lauterer@proxmox.com>
changes the layout to look i little bit more like the statistics panel
we have for ceph in pve, while changing to the UsageChart and adding
some more datastore infos (from last garbage collect)
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
heavily inspired by pveRunningChart, without the dynamically adding
of data and specific for the usage of datastores
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Dominik Csapak
Dietmar Maurer
Oguz Bektas
Thomas Lamprecht
Dylan Whyte
Wolfgang Bumiller
Dominic Jäger
Fabian Grünbichler
Aaron Lauterer
Fabian Ebner