the part number cannot go above 255 at the moment, but if it ever gets
bumped to a bigger integer type this boundary wouldn't cause a
compile-error. explicitly checking for overflowing u8 makes this a bit
more future-proof, and shuts up clippy as well ;)
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
some operations (e.g. garbage collection/restore/etc.) are very read
intensive on the chunks, and having atime=on and relatime=off (zfs default)
makes those write intensive operations too. Additionally, 'ext4' defaults to
relatime, so also change the default for api-created zpools.
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
It is not necessary, so avoid it. The client can now be used
with multiple threads (without using a Mutex).
Signed-off-by: Dietmar Maurer <dietmar@proxmox.com>
the 'utc' flag is now contained in the event itself and not given
as a flag to 'compute_next_event' anymore
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Signed-off-by: Dietmar Maurer <dietmar@proxmox.com>
- imported pbs-api-types/src/common_regex.rs from old proxmox crate
- use hex crate to generate/parse hex digest
- remove all reference to proxmox crate (use proxmox-sys and
proxmox-serde instead)
Signed-off-by: Dietmar Maurer <dietmar@proxmox.com>
commit c42a54795d introcuded a bug by
using fp.to_string(). Replace this with fp.signature() which correctly
returns the full fingerprint instead of the short version.
Signed-off-by: Dietmar Maurer <dietmar@proxmox.com>
by returning default data, in case the challenge data is not parseable.
this allows a new challenge to be started for the userid in question
without manual cleanup.
currently this can be triggered if an ongoing challenge created with
webauthn-rs 0.2.5 is stored in /run and attempted to be read
post-upgrade.
Reported-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
with current proxmox-tfa this became a hard error, since origin and rp
are not both Strings anymore..
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
we even use that for basically all the related schema names, "groups"
allone is just rather not so telling, i.e., "groups" what?
While due to the additive nature of `group-filter` is not the best
possible name for passing multiple arguments on the CLI (the web-ui
can present this more UX-friendly anyway) due to possible confusion
about if the filter act like AND vs OR it can be documented and even
if a user is confused they still are safe on more being synced than
less. Also, the original param name wasn't really _that_ better in
that regards
Dietmar also suggested to use singular for the CLI option, while
there can be more they're passed over repeating the option, each with
a single filter.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
and add a completion handler to complete the backup groups
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
this fixes bug #3533, since now a user can backup a single datastore
on multiple tape media pools in parallel, e.g. vms on one pool, ct on
another.
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
and convert existing (manually created/edited) jobs to the previous
default value of 'true'. the GUI has always set this value and defaults
to 'false'.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
Reviewed-by: Dominik Csapak <d.csapak@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
like for manual pulls, but persisted in the sync job config and visible
in the relevant GUI parts.
GUI is read-only for now (and defaults to no filtering on creation), as
this is a rather advanced feature that requires a complex GUI to be
user-friendly (regex-freeform, type-combobox, remote group scanning +
selector with additional freeform input).
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
Reviewed-by: Dominik Csapak <d.csapak@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
without requiring workarounds based on ownership and limited
visibility/access.
if a group filter is set, remove_vanished will only consider filtered
groups for removal to prevent concurrent disjunct filters from trashing
eachother's synced groups.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
Reviewed-by: Dominik Csapak <d.csapak@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
this is basically the sync job config without ID and some stuff
converted already, and a convenient helper to generate the http client
from it.
Suggested-by: Dominik Csapak <d.csapak@proxmox.com>
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
Reviewed-by: Dominik Csapak <d.csapak@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
instead of `GroupListItem`s. we convert it anyway, so might as well do
that at the start.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
Reviewed-by: Dominik Csapak <d.csapak@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
for gettin/setting the protected flag for snapshots (akin to notes)
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
when a group could not be completely removed due to protected snapshot,
throw an error
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
and log if a vanished groups could not be completely deleted if it
contains protected snapshots
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
adds the info that a snapshot is protected to:
* snapshot list
* manual pruning (also dry-run)
* prune jobs
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
some custom ACME endpoints do not have TOS, interpret this as
'the user has accepted the TOS', like we do for PVE.
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
our export code can handle if the tape is inside the drive, so unloading
it first does not have an benefit, it even makes the exporting slower,
since we first unload it into its original slot, and then moving it
to an import/export slot
so drop the code that unloads the tape from the drive, and let the
export code itself handle that
change the 'eject' into a 'rewind' and comment why we do that first
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
use fadvice(.., POSIX_FADV_DONTNEED) for RRD files. We read those files only once,
and always rewrite them.
Signed-off-by: Dietmar Maurer <dietmar@proxmox.com>
'export_media' can handle if the tape is in either a normal slot of the
library, or in the drive assigned to the current pool writer.
(because we need to lock the drive)
if it is, for some reason, in a different drive, the error message
'media is not online'
could be slightly confusing for a user, since it would appear in the drive list
add the 'or a differen drive' to make it clearer
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Because the types used inside the RRD have other requirements
than the API types:
- other serialization format
- the API may not support all RRD features
Signed-off-by: Dietmar Maurer <dietmar@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Storing much more data points now got get better graphs.
Signed-off-by: Dietmar Maurer <dietmar@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
allow the current thread to do some other work in-between
Signed-off-by: Dietmar Maurer <dietmar@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
And initialize only with proxmox-backup-proxy. Other binaries dont need it.
Signed-off-by: Dietmar Maurer <dietmar@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Append pending changes in a simple text based format that allows for
lockless appends as long as we stay below 4 KiB data per write.
Apply the journal every 30 minutes and on daemon startup.
Note that we do not ensure that the journal is synced, this is a
perfomance optimization we can make as the kernel defaults to
writeback in-flight data every 30s (sysctl vm/dirty_expire_centisecs)
anyway, so we lose at max half a minute of data on a crash, here one
should have in mind that we normally expose 1 minute as finest
granularity anyway, so not really much lost.
Signed-off-by: Dietmar Maurer <dietmar@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
send_command serializes everything so it cannot be used to send a
raw, optimized command. Normally that means we get an error like
> 'unable to parse parameters (expected json object)'
when used that way.
Switch over to send_raw_command which does not re-serializes the
command.
Fixes: 45b8a032 ("refactor send_command")
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
until now, we manually polled the systemd service state during a reload
so that the sd_notify messages get processed in the correct order
(RELOAD(old) -> MAINPID(old) -> READY(new))
with systemd >= 246 there is now 'sd_notify_barrier' which
blocks until systemd processed all prior messages
with that change, the daemon does not need to know the service name anymore
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
With the merger the shop got moved from shop.maurer-it to
shop.proxmox.com, while we transparently redirect we also want to
stop doing that in a few years, so use new domain.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
It also used `CertInfo` from pbs-tools which is also server
specific.
The original helper is now in the main crate's
client_helpers instead.
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
nothing from here is used anymore, so remove it
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
this has a 'from_listener' (tokio::net::TcpListener) since hyper 0.14.5 in
the 'tcp' feature (we use 'full', which includes that; since 0.14.13
it is not behind a feature flag anymore).
this makes it possible to create a hyper server without our
'StaticIncoming' wrapper and thus makes it unnecessary.
The only other thing we have to do is to change the Service impl from
tokio::net::TcpStream to hyper::server::conn::AddStream to fulfill the trait
requirements.
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
only bit 0-2 are fatal errors, bit 3-7 are used to indicate
some drive conditions. for details see the manpage of smartctl(8)
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
[ Thomas: resolved merge-conflict due to moved run_command ]
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
In order to avoid name conflicts with WorkerTaskContext
- renamed WorkerTask::log to WorkerTask::log_message
Note: Methods have different fuction signatures
Also renamed WorkerTask::warn to WorkerTask::log_warning for
consistency reasons.
Use the task_log!() and task_warn!() macros more often.
And application now needs to call init_worker_tasks() before using
worker tasks.
Notable changes:
- need to call init_worker_tasks() before using worker tasks.
- create_task_log_dirs() ís called inside init_worker_tasks()
- removed UpidExt trait
- use atomic_open_or_create_file()
- remove pbs_config and pbs_buildcfg dependency
it's only used for generating the docs for the interactive-shell
parts of the client.
Ideally we'd avoid that whole separate binary in the first place and
let the client dump it, but we'd need to have some more elaborate
"hide this command from the help/usage" mechanisms in the CLI
helper/formatter code to make that play out more nicely.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
some workers did not log when called via cli
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
to have the proper link between the token list and the sub routes
in the api, include the 'tokenname' property in the token listing
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
this provides some generic api call mechanisms like pvesh/pmgsh.
by default it uses the https api on localhost (creating a token
if called as root, else requesting the root@pam password interactively)
this is mainly intended for debugging, but it is also useful for
situations where some api calls do not have an equivalent in a binary
and a user does not want to go through the api
not implemented are the http2 api calls (since it is a separate api an
it wouldn't be that easy to do)
there are a few quirks though, related to the 'ls' command:
i extract the 'child-link' from the property name of the
'match_all' statement of the router, but this does not
always match with the property from the relevant 'get' api call
so it fails there (e.g. /tape/drive )
this can be fixed in the respective api calls (e.g. by renaming
the parameter that comes from the path)
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
we want to add something to it that needs access to the
proxmox_backup::api2 stuff, so it cannot live in a sub crate
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
basically a (semantic) revert of commit
991be99c37 "buildsys: workaround
linkage issues from openid/curl build server stuff separate"
This is no longer required because we moved proxmox_restore_daemon
code into extra crate (previous commit)
Originally-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Signed-off-by: Dietmar Maurer <dietmar@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Handle auth logs the same way as access log.
- Configure with ApiConfig
- CommandoSocket command to reload auth-logs "api-auth-log-reopen"
Inside API calls, we now access the ApiConfig using the RestEnvironment.
The openid_login api now also logs failed logins and return http_err!(UNAUTHORIZED, ..)
on failed logins.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
This need impl UserInformation for Arc<CachedUserInfo> which is implemented
with proxmox 0.13.2
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
ApiConfig: avoid using pbs_config::backup_user()
CommandoSocket: avoid using pbs_config::backup_user()
FileLogger: avoid using pbs_config::backup_user()
- use atomic_open_or_create_file()
Auth Trait: moved definitions to proxmox-rest-server/src/lib.rs
- removed CachedUserInfo patrameter
- return user as String (not Authid)
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
so that we actually have the property that 'match_all' refers to for
the templated API path.
This is mostly for improving usage of the WIP pbs-shell, i.e., its
`ls` command, it has no other functional/semantic impact.
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Also moved pbs-datastore/src/crypt_config.rs to pbs-tools/src/crypt_config.rs.
We do not want to depend on pbs-api-types there, so I use [u8;32] instead of
Fingerprint.
locking during the tests as regular user failed because we try to
chown to the backup user (which is not always possible).
Instead, do not lock at all, by implementing 'open_backup_lockfile' with
'create_mocked_lock'
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
Wolfgang Bumiller
Hannes Laimer
Fabian Grünbichler
Dominik Csapak
Dietmar Maurer
Thomas Lamprecht
Stoiko Ivanov