This also moves a couple of required utilities such as
logrotate and some file descriptor methods to pbs-tools.
Note that the logrotate usage and run-dir handling should be
improved to work as a regular user as this *should* (IMHO)
be a regular unprivileged command (including running
qemu given the kvm privileges...)
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
Adds possibility to recover data from an index file. Options:
- chunks: path to the directory where the chunks are saved
- file: the index file that should be recovered(must be either .fidx or
didx)
- [opt] keyfile: path to a keyfile, if the data was encrypted, a keyfile is
needed
- [opt] skip-crc: boolean, if true, read chunks wont be verified with their
crc-sum, increases the restore speed by a lot
Signed-off-by: Hannes Laimer <h.laimer@proxmox.com>
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
Adds possibility to inspect .blob, .fidx and .didx files. For index
files a list of the chunks referenced will be printed in addition to
some other information. .blob files can be decoded into file or directly
into stdout. Without decode the tool just prints the size and encryption
mode of the blob file. Options:
- file: path to the file
- [opt] decode: path to a file or stdout(-), if specidied, the file will be
decoded into the specified location [only for blob files, no effect
with index files]
- [opt] keyfile: path to a keyfile, needed if decode is specified and the
data was encrypted
Signed-off-by: Hannes Laimer <h.laimer@proxmox.com>
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
Adds possibility to inspect chunks and find indexes that reference the
chunk. Options:
- chunk: path to the chunk file
- [opt] decode: path to a file or to stdout(-), if specified, the
chunk will be decoded into the specified location
- [opt] digest: needed when searching for references, if set, it will
be used for verification when decoding
- [opt] keyfile: path to a keyfile, needed if decode is specified and
the data was encrypted
- [opt] reference-filter: path in which indexes that reference the
chunk should be searched, can be a group, snapshot or the whole
datastore, if not specified no references will be searched
- [default=true] use-filename-as-digest: use chunk-filename as digest,
if no digest is specified
Signed-off-by: Hannes Laimer <h.laimer@proxmox.com>
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
debugging history showed that its surely nice to have more logs at
when stuff happens (and thus fails)
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
now required as we always enforce lock files to be owned by the
backup user, and the restore code uses such code indirectly as the
REST server module is reused from proxmox-backup-server. Once that is
refactored out we may do away such things, but until then we need to
have a somewhat complete system env.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
pbs-datastore now ended up depending on tokio after all, but
that's fine for now
for the fuse code I added pbs-fuse-loop (has the old
fuse_loop and its 'loopdev' module)
ultimately only binaries should depend on this to avoid the
library link
the only thins remaining to move out the client binary are
the api method return types, those will need to be moved to
pbs-api-types...
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
by using the api macro on the async method and reusing the PruneOptions
from pbs-datastore with 'flatten: true'
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
LVM replaces any dashes '-' in an LV or PV name with two '--' for the
created device node in /dev/mapper/ to distinguish the seperating
character between the PV and LV name.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
This lock is held during VM startup, so that multiple calls will not
start VMs twice. But this means that the timeout needs to incorporate
the time it might take a VM to boot, so increase it quite a bit.
This could previously lead to "interrupted system call" errors when
accessing backups with many disks.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
New kernel has stricter checks on tmpfs with stick-bit on directories, so some
commands (i.e. proxmox-tape changer status) fails when executed as root, because
permission checks fails when locking the drive.
This patch move the drive locks to /run/proxmox-backup/drive-lock.
Note: This is incompatible to old locking mechmanism, so users may not
run tape backups during update (or running backup can fail).
move key_derivation to pbs-datastore
pbs-api-types should only contain "basic" types which
* are usually required by clients
* don't depend on pbs-related code directly
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
These are mostly tokio specific "hacks" or "workarounds" we
only really need/want in our binaries without pulling it in
via our library crates.
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
During startup most of the stuff is happening in milliseconds (or
less), so the timestamp granularity of seconds made it hard to tell
if the previous command required 990ms or 1ms, which is quite the
difference in the restore daemon context.
Using micros seems not to bring too much additional information, a
millisecond is already an ok lower time resolution for logging, so
switch only to millis for now.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
fixes file restore again.
The new Memcom tracking file lives in `/run/proxmox-backup` and is
always created on REST interaction, as CachedUserInfo uses it to
efficiently track config changes, and such a cache is used in each
REST handle_request.
Further, the Memcom infra expects the base run PBS dir to exists
already, which is an OK assumption to have, but in the file-restore
daemon we have a significantly more minimal environment, and the run
dir was simply not required there, even /run isn't a tmpfs yet.
Fixes fda19dcc6f ("fix CachedUserInfo by using a shared memory version counter")
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Parses JSON output from 'pvs' and 'lvs' LVM utils and does two passes:
one to scan for thinpools and create a device node for their
metadata_lv, and a second to load all LVs, thin-provisioned or not.
Should support every LV-type that LVM supports, as we only parse LVM
tools and use 'vgscan --mknodes' to create device nodes for us.
Produces a two-layer BucketComponent hierarchy with VGs followed by LVs,
PVs are mapped to their respective disk node.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
Reviewed-By: Fabian Grünbichler <f.gruenbichler@proxmox.com>
Prefix zpool mount paths to avoid clashing with other mount namespaces
(like LVM).
Also ignore "already-mounted" error and return it as success instead -
as we always assume that a mount path is unique, this is a safe
assumption, as nothing else could have been mounted here.
This fixes an issue where a mountpoint=legacy subvol might be available
on different disks, and thus have different Bucket instances that don't
share the mountpoint cache, which could lead to an error if the user
tried opening it multiple times on different disks.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
Reviewed-By: Fabian Grünbichler <f.gruenbichler@proxmox.com>
otherwise the path ends in an array ["foo", "bar"] instead of "foo/bar"
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
Reviewed-By: Fabian Grünbichler <f.gruenbichler@proxmox.com>
To support nested BucketComponents, it is necessary to dedup them, as
otherwise two components like:
/foo/bar
/foo/baz
will result in /foo being shown twice at the first hierarchy.
Also make the size property based on index and optional, as for example
/foo in the example above might not have a size, and bar/baz might have
differing sizes.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
Reviewed-By: Fabian Grünbichler <f.gruenbichler@proxmox.com>
These require mounting using the regular 'mount' syscall.
Auto-generates an appropriate mount path.
Note that subvols with mountpoint=none cannot be mounted this way, and
would require setting the mountpoint property, which is not possible as
the zpools have to be imported with readonly=on.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
Uses the ZFS utils to detect, import and mount zpools. These are
available as a new Bucket type 'zpool'.
Requires some minor changes to the existing disk and partiton detection
code, so the ZFS-specific part can use the information gathered in the
previous pass to associate drive names with their 'drive-xxxN.img.fidx'
node.
For detecting size, the zpool has to be imported. This is only done with
pools containing 5 or less disks, as anything else might take too long
(and should be seldomly found within VMs).
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
Even through best efforts at keeping it small, including the ZFS tools
in the initramfs seems to have exhausted the small overhead we had left
- give it a bit more RAM to compensate.
Also disable the ZFS ARC, as it's no use in such a memory constrained
environment, and we cache on the QEMU/rust layer anyway.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
since the output:
Result: "<UPID>"
is not really interesting, show instead the task log while
the datastore is creating, since it is now run in a worker
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
admin/datastore reads linearly only, so no need for cache (capacity of 1
basically means no cache except for the currently active chunk).
mount can do random access too, so cache last 8 chunks for possibly a
mild performance improvement.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
when we remove a datastore via api/cli, the proxy
has sometimes leftover references to that datastore in its
DATASTORE_MAP which includes an open filehandle on the
'.lock' file
this prevents unmounting/exporting the datastore even after removal,
only a reload/restart of the proxy did help
add a command to our command socket, which removes all non
configured datastores from the map, dropping the open filehandle
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Signed-off-by: Dietmar Maurer <dietmar@proxmox.com>
This reverts commit 75f9f40922, which is
no longer needed now that we use tokio >= 1.6 which contains the proper
fix.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
While the issue with vsock packets starving kernel memory is mostly
worked around by the '64k -> 4k buffer' patch in
'proxmox-backup-restore-image', let's be safe and also limit the number
of concurrent transfers. 8 downloads per VM seems like a fair value.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
The extract API call may be active for more than the watchdog timeout,
so a simple ping is not enough.
This adds an "inhibit" API, which will stop the watchdog from completing
as long as at least one WatchdogInhibitor instance is alive. Keep one in
the download task, so it will be dropped once it completes (or errors).
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
See this PR for more info: https://github.com/tokio-rs/tokio/pull/3756
As a workaround use a pair of connected unix sockets - this obviously
incurs some overhead, albeit not measureable on my machine. Once tokio
includes the fix we can go back to a DuplexStream for performance and
simplicity.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
Used to specify a filesystem placed directly on a disk, without a
partition table inbetween. Detected by simply attempting to mount the
disk itself.
A helper "make_dev_node" is extracted to avoid code duplication.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
A bucket might contain multiple (or 0) layers of components in its path
specification, so allow a mapping between bucket type strings and
expected component depth. For partitions, this is 1, as there is only
the partition number layer below the "part" node.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
- refactor the combinators,
- make it take a `&T: Serialize` instead of a Value, and
allow sending the raw string via `send_raw_command`.
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
we cannot add a plugin with an existing ID so this completion helper
is rather counterproductive...
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Set PBS_QEMU_DEBUG=1 on a command that starts a VM and then connect to
the debug root shell via:
minicom -D \unix#/run/proxmox-backup/file-restore-serial-10.sock
or similar.
Note that this requires 'proxmox-backup-restore-image-debug' to work,
the postinst script is updated to also generate the corresponding image.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
A PCI bus can only support up to 32 devices, so excluding built-in
devices that left us with a maximum of about 25 drives. By adding a new
PCI bridge every 32 devices (starting at bridge ID 2 to avoid conflicts
with automatic bridges), we can theoretically support up to 8096 drives.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
The guest kernel requires more memory depending on how many disks are
attached. 256 seems to be enough for basically any reasonable and
unreasonable amount of disks though.
For debug instance, make it 1G, as these are never started automatically
anyway, and need at least 512MB since the initramfs (especially when
including a debug build of the daemon) is substantially bigger.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
Helps to clean up a VM that has crashed, is not responding to vsock API
calls, but still has a running QEMU instance.
We always check the process commandline to ensure we don't kill a random
process that took over the PID.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
otherwise, the kernel driver exposes file names as iso 8859-1,
but we want to have them as utf8.
This mapping should always work, since UTF16 can be cleanly converted
to UTF8.
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
