use our hostport regexes to parse out a potential port from the host field
and send it individually
this makes for a simpler and cleaner ui
this additionally checks the field for valid input before sending it to
the backend
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
* add square brackets to ipv6 adresses in BackupRepository if they not
already have some (we save them without in the remote config)
* in get_pull_parameters, we now create a BackupRepository first and use
those values (which does the [] mapping), this also has the advantage
that we have one place less were we hardcode 8007 as port
* in the ui, add square brackets for ipv6 adresses for remotes
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
by setting a maxHeight+scrollable
(i used 500px to be still visible on our 'min screen size' 1280x720)
and by disabling emptyText deferral, which now shows the text instantly
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
name sections according to the title or content and add
the respective onlineHelp to the following panels:
- datastore
- user management
- ACL
- backup remote
Signed-off-by: Oguz Bektas <o.bektas@proxmox.com>
Reviewed-By: Dominik Csapak <d.csapak@proxmox.com>
Tested-By: Dominik Csapak <d.csapak@proxmox.com>
*/x is valid syntax for us, but not systemd, so to not confuse users
write it like systemd would accept it
also an timespec must at least have hours and minutes
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
if we have a stale backup without an manifest, we do not count
the remaining files in the backup dir anymore, but this means
we now have to check here if there are really any encrypted
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
goes through the sections in the documents and creates the
OnlineHelpInfo.js file from the explicitly defined section labels which
are used in the js files with 'onlineHelp' variable.
Allows to differ the following situations:
* some snapshots in a group where not verified
* how many snapshots failed to verify in a group
* all snapshots verified but last verification task was over 30 days
ago
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Using 75 as width we can display up to 9999999 which would allow
displaying over 19 years of snapshots done each minute, so quite
enough for the common cases.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
do not count files where we do not have any information
such files exist in the backup dir, but are not in the manifest
so we cannot use those files for determining if the backups are
encrypted or not
this marks encrypted/signed backups with unencrypted client.log.blob files as
encrypted/signed (respectively) instead of 'Mixed'
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Double-click on the verify grid-cell of a specific snapshot (not the
group) opens the relevant task log.
The date of the last verify is shown as tool-tip.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
to also have the correct icons for warnings and unknown tasks
the text is here "ERROR: ..." now, so leave the 'Error' out
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
just because we can't verify the signature, does not mean the contents
are not accessible. it might make sense to make it obvious with a hint
or click-through warning that no signature verification can take place
or this and downloading.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
...when an entry is selected, that doesn't exist after the reload.
E.g. when one deletes selects a file within a snapshot and then clicks
the delete icon for said snapshot, focusRow would then fail and the
loading mask stay on until a reload.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
when clicking reload, we keep the existing selection
(if it still exists), and the previous expanded elements expanded
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
which searches the whole tree (name & owner)
we do this by traversing the tree and marking elements as matches,
then afterwards make a simple filter that matches on a boolean
worst case cost of this is O(2n) since we have to traverse the
tree (in the worst) case one time, and the filter function does it again
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
instead of having the files as a column, put the files into the tree
as a third level
with this, we can move the actions into an action column and remove
the top buttons (except reload)
clicking the download action now downloads directly, so we would
not need the download window anymore
clicking the browse action, opens the pxar browser like before,
but expands and selects (&focus) the selected pxar file
also changes the icon of 'signed' to the one to locked
but color codes them (singed => greyed out, encrypted => green),
similar to what browsers do/did for certificates
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
taken mostly from PVE, with adaption to how PBS does things.
Main difference is that we do not have a resource store singleton
here which we can use, but for datastores we can already use the
always present datastore-list store. Register it to the store manager
with a "storeId" property (vs. our internal storeid one).
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
modelled after the PVE one, but we are not 1:1 compatible and need
deleteEmpty support. For now let's just have some duplicate code, but
we should try to move this to widget toolkit ASAP.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
This aligns it with PVE and allows the widget toolkit's update window
"refresh" to work without modifications once POST /apt/update is
implemented.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
Two digits fit nicely, and the extra plus for the >99 case doesn't
takes that much space either. So that and the fact that 9 is just
really low makes me bump this to 99 as cut-off value.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
the idea is to blend in when no task is running, thus no
background-color there. When tasks are running use the proxmox
branding guideline dark-grey, it isn't used as often so it should
fall into ones eye when changing but it has some use so it doesn't
seems out of place.
Reduce the border radius by a lot, so that it seems similar to the
one our ExtJS theme uses for the buttons outside - the original
border radius seems like it comes from the time where this was
intended to be a floating badge, there it'd make sense but as
integrated button one this seems to fit the style much more.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
we can now show 'none', 'encprypted', 'signed' or 'mixed' for
the crypt mode
also adds a different icon for signed files, and adds a hint that
signatures cannot be verified on the server
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
We cannot verify, download, file-browse backups which are currently
in progress.
'Forget' could work but is probably not desirable?
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
if the baseCls is not 'x-plain' the background of the flex
element is white, and on some zoom steps it gets taller
than one pixel and appears as a white line
making it have the plain baseCls, so it does not get any
background color and is always invisible
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
the api call can take a very long time (for now), until we can
improve that, increase the timeout from the default of 30s
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Not even hard feeling on 'Datastore' vs. 'Data Store' but consistency
is desired in such names.
Talked shortly with Dominik, which also slightly favored the one
without space - so just go for that one.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
it is only designed to be a quick overview, so having holes there
is not really pretty and since we do not even show any date
for the points, we can simply reuse the last value for holes
the 'real' graph with holes is still available on the
DataStoreStatistics panel
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
this will make refactoring easier for panels that are reused from pve
(where we always have a hostname)
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
we have to use the correct store, and we have to manually show the
error (since monStoreErrors only works for Proxmox Proxies)
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Get the first visible node through the Ext.data.NodeInterface defined
"firstChild" element and expand that if there's only one archive
present.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
enables to be able to download whole files from the backup (e.g.
the decoded didx/fidx/blobs) for unencrypted backups
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
do not use two different gettexts for groups and single backups
and correct logic for backup groups
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
this also contains an adapted CreateDirectory window
for now this is mostly copied, since refactoring was not that
straightforward (changed parameters, etc.)
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
by querying the new /status/task api every 15 seconds
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
[w.bumiller@proxmox.com: fixup from d.csapak@proxmox.com]
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
LongestTasks:
grid that shows tasks sorted by duration in descending order
RunningTasks:
grid that shows all running tasks
TaskSummary:
an overview of backup,prune,gc and sync tasks (error/warning/ok)
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
with these changes fa icons in actioncolumns,
they have the same layout as <i> elements on the same line
(they were slightly bigger and offset before)
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
shows an overview over the datastores, including a small chart of the
past month and an estimation of when its full
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
by adding them as columns for the config view,
and as a seperate tab on the edit window (this is done to not show
too many options at once)
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
split them into two files and put them into the respective directory
refactor the DataStoreConfigPanel to controller/view
and the DataStoreEdit window/inputpanel to simply an editwindow
(there is no need to have a seperate inputpanel) which also
prepares the window for edit (by using pmxDisplayEditFields)
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
We will show an overall status of the DataStores in the Dashboard, so there
is no need for a seperate DataStores Status.
This means we can move the Config to where the Status was, and remove
the duplicated entry in the NavigationTree, reducing confusion for users
We can still seperate the permissions by simply showing a permission
denied error, or simply leaving the list empty
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
the remove button did not get the selModel since the xytpe was not
'grid' so give it the correct xtype
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
if the last sync job is too far in the past (or there was none at all
for now) we run it at the next iteration, so we want to show that
we now calculate the next_run by using either the real last endtime
as time or 0
then in the frontend, we check if the next_run is < now and show 'pending'
(we do it this way also for replication on pve)
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
this uses different parameters which we want to be the same for
all products (e.g. secure cookie)
leave the PBS.Utils.updateLoginData for the case that we want to do
something more here (as in pve for example)
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
while touching it, make columns and tbar in DataStoreContent.js
declarative members and remove the (now) unnecessary initComponent
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
shows a nice overview of sync jobs (incl status of last run, estimated
next run, etc.) with options to add/edit/remove and also show the
log of the last run and manually run it now
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
'sync' is used for manually pulling a remote datastore
changing it for a scheduled sync to 'syncjob' so that we can
differentiate between both types of syncs
this also adds a seperate task description for it
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
when using a diffstore, we have to add all used columns to the model,
else they will not refresh on a load
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Avoid triggering non-required background updates during browsing a
datastores content or statistics panels. They're not expensive, but I
do not like such behavior at all (having traveled with trains and
spotty network to often)
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Mostly refactoring, but actually fixes an issue where one seldom run
into a undefined dereference due to the store onLoad callback getting
triggered after some of the componet was destroyed - on quick
switching through the datastores.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
adding a new one after load will append it still at the end, though.
But datastores are not something which get frequently added after
initial setup, so don't care about that for now..
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
by introducing a datastorepanel (a TabPanel) which holds the content
and acl panel for now.
to be able to handle this in the router, we have to change the logic
of how to select the datastore from using the subpath to putting it
into the path (and extracting it when necessary)
if we need this again (e.g. possibly for remotes), we can further
refactor this logic to be more generic
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
this has to be different from pve for now, since the default of
'enabled' is reverted (pve: default disabled, pbs: default enabled)
if we decide to change this either here or in pve, we can refactor
it to the widget-toolkit
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
using a handlebars instance in ApiConfig, to cache the templates
as long as possible, this is currently ok, as the index template
can only change when the whole package changes
if we split this in the future, we have to trigger a reload of
the daemon on gui package upgrade (so that the template gets reloaded)
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
for now forbid all control characters[0] in the comment value, the
section config writer cannot cope with newlines in the value, it
writes them out literally, allowing "injection" or breaking the whole
config.
In the webinterface use also a textfield, not a textarea.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
this broke the view, let the panel disappear until one switched to
another and back again, let's just no close main-view panels :)
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
just a starting point, code ported initially over from PMG, some
minor things are handled differently though, we have not multiple
nodes (for now) so it's very 'localhost' centric.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Similar to PVE and PMG, for quick access when one has the basic
webinterface open anyway. Should move to the "proxmoxHelpButton" once
we have an onlineHelp mapping to the docs.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>